Question about Hoover S3765-040 WindTunnel Bagless Canister Vacuum

2 Answers

Cord rewind hoover s3765

Cord rewind hoover s3765 stuck pulled out wont go back

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Remove the 5 Phillips-head screws carefully without stripping the heads. There are 2 at the front bottom, 2 at the top back (above the wheels), and 1 at the back beneath the dustbin. After the screws are loosened/removed, you can remove the top cover of the vacuum (be careful with the attached wiring harness). Then remove the black plastic cover over the cord rewind wheel, and you can easily remove the wheel. Pull the cord out a bit to give yourself some slack. You should be able to free the jammed cord and then reassemble the vac.

Posted on May 23, 2010

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 36 Answers

I would take the unit to a local repair shop one with free estimates, sometime they just get locked up. could be a cheap fix. However if not they should be able to give a repair cost and if it's to much simply shop around worst case your not out any $$$$ good luck..

Posted on Nov 14, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I get the cord out a Hoover Wind Tunnel?


Hi there! If the cord is stuck and won't pull out, try gently pulling the cord while pressing the cord rewind button. Hope that helps! If you still need assistance feel free to reach us here on Fixya, Facebook.com/dirtdevil or Twitter @DirtDevil.

Oct 01, 2014 | Hoover Vacuums

1 Answer

Hoover S3765


If you light and nozzle motor both go off at the same time, you might have a bad power cord. Mine had this problem which I could verify by jiggling/twisting the cord near the strain relief on the nozzle. It would go on and off as I did this. The cord is cheap to replace, around $13 for the part shipped. Part number is 59134072.

May 30, 2012 | Hoover S3765-040 WindTunnel Bagless...

1 Answer

Plug/wire is stuck partially out (4-5 inches)pressing on rewind button nothing happens....just stuck!


This usually means the cord got twisted over itself. Pull it completely out and give slight resistance on cord and rewind it again.

Sep 17, 2010 | Hoover Elite Rewind Bagless Upright...

1 Answer

Hoover UH70120 WindTunnel TSeries problems with the cord. im a tech savy guy and have been trying to fix a cord after it was pulled to far out and now wont auto retract, but just cant find a way to pull...


You will probably have to replace the cord winding mechanism. I have never had any luck trying to repair one. Cord retracters are great when they work but it seems like they always go bad before too long. On many units you can't even replace the cord if you get a bad spot in it, you have to buy a new cord reel which can get expensive.

Jul 21, 2010 | Hoover UH70120 WindTunnel TSeries Rewind...

2 Answers

Automatic Cord Rewinder is not rewinding anymore


I had the same problem - the power cord for my Hoover Elite Upright (U5507900) was stuck a few inches out and wouldn't go any further. But when I unscrewed the rewinding mechanism, the cord had clearly gotten twisted and partly buried under itself so after some work I was able to free it. Now it seems to be working fine, at least for the moment. Note that I had to use small screwdrivers to unscrew the cord rewinding compartment, like the kind of screwdrivers you use for computer repair.
HTH!


May 27, 2009 | Hoover Elite Rewind Bagless Upright...

2 Answers

Auto rewind for the electrolux oxygen 3 ultra


HI
If this isnt working correctly, take it back. It wont get better

Feb 20, 2009 | Electrolux EL7020A Oxygen 3 Ultra Canister...

2 Answers

S3765


Returned the sweeper to Costco for a full refund and bought another.

Sep 08, 2008 | Hoover S3765-040 WindTunnel Bagless...

1 Answer

Hoover U5507900 Elite Rewind problem


May have to replace the cord reel asm. It will have to be taken out and inspected, if can't see a problem, then replace it. If this is less then one year old, then it is still under warranty and should be taken to a warranty shop along with proof of purchase.

Dec 31, 2007 | Hoover U5507900 Elite Rewind Bagless...

9 Answers

Power Cord is Jammed


Thanks Joe for finding the location of that fifth screw. I've taken some photos to help out anyone else who might be having this issue.

Its on my blog here.

Jul 06, 2007 | Hoover S1361 Bagged Canister Vacuum

Not finding what you are looking for?
Hoover S3765-040 WindTunnel Bagless Canister Vacuum Logo

816 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hoover Vacuums Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18387 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

Brad Brown

Level 3 Expert

15441 Answers

Are you a Hoover Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...