Need to change phone back to tone dialing
Here's what the manual says:
Changing the Dial Mode (Tone or Pulse Dialing)
(HS1 only)
Your phone can communicate with the telephone network in two different
ways: tone dialing or pulse dialing. These days, most phone networks use a
method called tone dialing, so your phone comes programmed for tone dialing.
If your phone company uses pulse dialing, you need to change your phone's
dial mode. If you don't get a dial tone or can't connect to the telephone
network, follow the steps below to modify your phone?s settings:
With the phone in standby, press and hold [cid/menu].
Press [vol/ / ] to move the pointer to select DIAL.
Press [select/channel] to set the phone to pulse dialing.
Press [end].
Return the handset to the base. The handset communicates the new
setting to the base, and the base activates the setting on any other
handsets.
Hope this helps out.
K
Can't find my operations guide and it seems that Southwestern Bell is out of business.Their site doesn't work for any information or guides.I just need to know how to switch from pulse dialing to tone.
At least now I know not to but anything labeled Southwestern Bell and as I am in the comnsumer electronics business,I need to inform all of my customers of this fact.
If anyone has any ideas,please em me at [email protected] or [email protected],
Ron
×