Question about Sony Televison & Video
Sony Bravia KDL-32V2000 32 in LCD TV When in the EPG, after pressing EPG button on the remote control) the tv will switch itself off and then come back on again automatically after 3-10 seconds approx, to the same channel as previously displayed.
I bought this tv from the sony centre, I thought it came with a 5 yr warranty at the time but now the shop says it was 3 year and guess what- I can't find my paperwork! Did anyone buy this tv with a 5 yr warranty? If it was 3yrs then it is only 3 months out of warranty!!!!
Any help much appreciated
Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Pull up older posts.
In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.
Posted on Apr 30, 2017
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
What about the Led, it shows blinkig light or just dead . if no blinkig at all could'be power supply fuse and or the powers upply board
Posted on Jun 22, 2007
SOURCE: cant get digital on my tv
The easiest way to fix this is to do a master reset and let the TV reprogram ll of the channels. You must have the original Sony TV remote to do this. When you have the remote, find the circular area of the remote with four buttons in a circle around a center button.. Turn on the TV and Press and hold the top button (the Up button) of the 4 buttons arranged in a circle. Then, while holding down this Up button, press the power button ON THE TV (not the one on the remote) and release both buttons. The TV should now reset and come up and ask for a language choice. You choose the language using the 4 keys mentioned earlier (the top and bottom of the 4 keys for up and down and once you have the choice you want, press the button in the middle). After choosing the language, it will ask to autoprogram the channels. Choose yes and let it autoprogram and all of the channels should reappear.
Posted on Nov 23, 2008
SOURCE: My tv is not switching on
It sounds like you had a power surge and the five blinks indicates that the video is not working. Unfortunately, it could be a number of things and a TV troubleshooter will have to go through the process of ruling out a problem and then considering the next problem.
Posted on Apr 04, 2009
Try leaving the TV unpugged for 30 minutes so the TV can reset itself.
If that doesn't work, most likely the TV has a power supply related problem. The most common thing to go out is the circuit board that supply power to the screen. Commonly called a Backlight Inverter Board.
I can't say it's 100% the problem because I can't actually look at the tv over the internet.
If by chance the TV is still under warranty, go that route.
If not under warranty and If you have some electronic experience, you can purchase a Service Manual over the internet and diagnose the source of the problem and fix it by soldering in the new part. The Service Manual will give you flashing red light codes, circuit diagrams, test points, and part# lists. Usually, cost under $20.
I hope I shed some light on the subject for you.
Posted on Jun 29, 2009
This can be the panel itself, and or the matrix decoder/driver boards. The cost of this type of repair can approach the cost of a new set. From your description, I am thinking it is the panel itself that has failed.
Parts for your set are from Sony only because there is no third party manufacturing for these types of parts and assemblies.
Usually, when these types of sets become defective they are usually not worth servicing. During warranty the manufactures generally give a new set to the client, or they give a re-built set which has been built up using parts and modules from other sets that came back for service and had different types of problems.
If you know a tech is is good at servicing these types of set, maybe he can find a number of scrapper set of the same model to take parts from. You just have to hope the ones he finds have the same types of fault.
Posted on Aug 06, 2009
Tips for a great answer:
Jul 07, 2014 | Sony KDL-32S3000 32 in. LCD Television
May 17, 2013 | Sony KDL 40CX520 40 CX520 Series Full HD...
Oct 20, 2012 | Sony BRAVIA KDL-32V2000 32 in. LCD...
Apr 26, 2011 | Sony BRAVIA KDL32V5500 32 in. TV
Jul 18, 2010 | Sony BRAVIA KDL-32S2000 32 in. LCD HDTV
Mar 22, 2010 | Sony BRAVIA KDL-32V2000 32 in. LCD...
Jan 13, 2010 | Sony BRAVIA KDL-32S2000 32 in. LCD HDTV
Feb 14, 2009 | Sony Bravia KDL-32N4000 32 in. HDTV LCD TV
131 people viewed this question
Usually answered in minutes!