Question about HP Business InkJet 2800 Printer

1 Answer

Won't manual feed

Will not manual feed.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers
Re: Won't manual feed - HP Business InkJet 2800 Printer Printers & Copiers

And tray 1 as well..

Posted on Oct 28, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Adf won't feed, just makes loud clicking sounds

Normally ADFs have a top feed roller and a bottom feed which turns in the opposite direction . If the top feed roller is dirty / dusty , the original will not be pulled through , Also if the original is very thick ( > 130 140 gsm )

Dec 20, 2012 | Canon ImageRunner 1600 Copier

1 Answer

I can't get anything to print from tray 1, the manual feed. I'm trying to print envelopes and they keep printing on 8.5x11 paper from tray 2. If I put envelopes in tray 2 it won't print

Have you already tried this? After you click print and select your printer, click properites and select your paper from 8.5x11 to Envelope.

Jun 25, 2012 | Xerox Phaser 8560MFP Laser Printer

1 Answer

HP D110a won't feed paper. I applied a little pressure on the feed wheel and it works, but I don't want to stand there with a screwdriver all day.

you probably might have to lubricate the feed wheel with some CRC or C227 electrical lubricant spray and just check the rubber that's spinning the feed if it looks worn and need replacing.
Good Luck and thanks for using Fixya.


Aug 03, 2011 | Printers & Copiers

1 Answer

It says paper tray is empty when it is not and so it won't feed the paper through.

It is probably asking for paper in the manual feeder. Open that door and insert a peice of paper to see if that will help.

Aug 02, 2011 | Dell 1815dn All-In-One Laser Printer

1 Answer

The machine won't print. It won't feed paper, The

Your machine needs to be serviced.
replace the cartridge with the original one.
it can not print if one cartridge is missing or not original.

Jul 12, 2011 | Canon Printers & Copiers

1 Answer

Paper won't feed from both tray and manual feed tray...motor starts, attempts to grab paper, but doesn't


Jun 18, 2011 | HP Printers & Copiers

1 Answer

Mfc8440 won.t print. can't cancel

Hi, prossible cause, tray not seated properly. If it is not seen by the mfc it will remain in manual mode.

Jul 24, 2009 | Brother Printers & Copiers

1 Answer

There is NO paper jam- and the paper won't feed. We have taken the printer apart- NOTHING hung up- gears are okay- still won' feed paper.


Most of our printers pull the paper down on one side slightly faster than the other. The printer hardware should even this out when printing. You should also ensure the paper meets the automatic feeder requirements of the printer.

If printing is skewed, feeding multiple pages or jamming, please follow these instructions (use a regular letter size paper to test after doing the steps given below):

Please check to ensure there is nothing obstructing the paper feed mechanism down inside the printer where it is not easily seen. If there is nothing obvious, unplug the printer and remove the paper. Open the front cover and look above the steel rod. You should see a conveyor belt with rubber teeth on it, like a fan belt. Take the bottom part of that belt and move it gently to the left. The cartridges should come out with it. Make sure the cartridges can move fully from one side of the printer to the other. Check also the output rollers on the bottom of the printer for any blockage. If it is jamming under the carrier assembly, you may be able to fix it using the manual feed slot. Turn the printer off. Next take a #10 envelope and feed it through the left side of the paper feed slot (The manual paper feed slot is preferred, but the automatic feed will do if there is no manual paper feed for this printer) until it comes completely through the printer to the back of the exit rollers. Move it up and down and slowly move it over to the right side. If something is stuck under the black guide plate this may work it loose or you may have to feed the envelope through the front rollers and push your way backward (please be careful here).
Next, take a damp warm cloth and clean the rubber rollers in the automatic sheet feeder. Dust may be coating the rollers there and as they become less tacky, they cannot feed paper correctly.

try it out....

Apr 05, 2009 | Lexmark P4350 All-In-One InkJet Printer

1 Answer

Print head alignment +won't feed paper

Best solution is to clean the head with it in place,here's
the manual for your printer

Oct 09, 2008 | Epson Stylus Photo R2400 InkJet Printer

Not finding what you are looking for?
HP Business InkJet 2800 Printer Logo

Related Topics:

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts


Level 3 Expert

93861 Answers


Level 3 Expert

7983 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides