Question about Marantz SR-6300 Receiver

1 Answer

Hi One of my surround channels drops out? - Marantz SR-6300 Receiver

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,831 Answers

Hello

If it is only one channel which is dead, you might just be in luck.
If the amp is still in the warranty period, just send it in, if you open it up, you will loose your warranty.

If it is out of the warranty period open up the amp. You should see the circuit board now and it should look something like this.hi One of my surround channels drops out? - e1de0ce.jpg

Okay, now follow the path on the circuit board on the channel which is not working. On the path you should see the capacitors looking like this.

155be93.jpg

Now, it s usually a loose or blown capacitor, you should be able to see very clearly if the capacitor on that certain channel is blown. If you can solder a new one in, if you dont know how, just send it in for repairs, wont cost a lot.
If it is a loose capacitor you should be able to feel it, just have a look, if there is something blown you will notice it quickly. You should also be able to smell a sharp smell.

Kind regards
Andrea

Posted on Nov 14, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is it intermittently losing channels...front speakers and or rear surround?


How to troubleshoot low sound or no audio from the rear ...

https://us.en.kb.sony.com/.../how-to-troubleshoot-low-sound-or-no-audi...
Aug 15, 2015 - Verify that the rear surround speakers are properly connected to the ...For Dolby® ProLogic surround sound, the center-channel mode must be set to ... the center or rear surround speakers for the Home Theatre (HT) system.

Why Are My Speakers Producing Static? - Electronic House ...

www.electronichouse.com/.../home-audio/why-are-my-speakers-produci...
Here are 3 reasons that speakers produce static and solutions you can try. ... If they are your dedicated front L/R channels speakers in a 5.1 or 7.1 system, you more ...Since you have no problem with your existing rear speakers, if they begin to distort on... Home Theater Subwoofer Puts Boom in This Room · Soundbase vs ...

How to Check if your Speakers are Wired Correctly ' Richard ...

www.richardfarrar.com > Podcasting
Mar 25, 2009 - Attaching speakers to your Hi-Fi system usually only requires a few cables. ..... Is this test applicable for a home theater setup with 5 speakers? ... frontstereo speakers, but to do a similar test on your rear surround speakers would ... Yes, switching polarity on one channel of the amp output to your speakers ...

Pioneer VSX-816 speaker drop out - AVS Forum ' Home Theater ...

www.avsforum.com/.../1068233-pioneer-vsx-816-speaker-drop-out.htm...

Sep 20, 2008 - 30 posts - ‎24 authors
The right front speaker sound drops out intermittently as of about 6 months ago. ...mode and back to Auto Surround would bring the center channel back. ... the push pin that holds several grey wires in place, and pull the wires loose. 9. ..... Is it possible that the cold joints are elsewhere in the system, but that ... Yamaha RX-V663: Intermittent/No Audio in Front ...
4 posts
Jan 23, 2014
Sony Receiver going in to Protect Mode
16 posts
Jan 12, 2012
The Official Sony STR-DH820 Thread
30 posts
Aug 29, 2011
Denon AVR-1910 - No more sound.
30 posts
Feb 15, 2011
More results from www.avsforum.com

Dec 12, 2015 | Audio Players & Recorders

1 Answer

My computer won't recognise all five speakers


I believe you need to go into audio settings via control panel and change two channel desktop speakers to five channel in the drop down menus.there is usually a test scenario for 5 channel that then pulses sound through each speaker separately to ensure your setup us correctly working .

Feb 22, 2015 | Logitech X-530 5.1 Surround Sound...

1 Answer

What is the time delay switch for on a sa 5760 receiver


Hi,here is the basic info for your question..
Take care and please
Remember to rate/vote and give me 4 Thumbs Up
for Helping out the Community :)

Hope this helps!

*****************************************


Surround Sound System Settings ---- Correct Time Delay Setting in Multi-channel Audio

A correctly set surround sound system can yield dramatic improvements to your
home theater sound or multi-channel music listening experience. In particular,
a correctly set time delay setting between the different channels is essential
for a realistic and unified surround soundfield.
Luckily, most of today's surround processors make setting the time delays
between the rear and the fronts a matter of a few entries in the setup menu.
Yet having a proper understanding of the principles behind correct time delay
settings is essential for the best results.
In this guide, we explain the principles behind time delay settings in surround
sound and show you how to adjust your surround processor or AV receiver for the
best surround sound field.

Time Delay Setting in Multi-channel Surround Sound Systems

Correct home theater speaker placement and properly balanced sound levels
between the different channels in multi-channel audio, while crucial, are not
enough to sustain a unified soundfield in a surround sound setup. A correctly
set surround sound system requires that sound from all the different speakers
reach the listener at exactly the same instant.
This explains why all fronts, left, right and center channel speakers, should
be set at exactly the same distance from the listening position. At the same
time, in a typical home theater setup, the surround speakers are closer to the
viewer than the fronts.

To compensate for this distance discrepancy, surround sound playback systems
apply a split-second delay to the surround sound channels.
----------------------------

Jun 22, 2011 | Technics Audio Players & Recorders

1 Answer

Hi! I have onkyo TX-SR308 and i surround problem.


You need to tell it you have surround speakers. Page 30.

The manual is available here...
http://www.onkyousa.com/model.cfm?m=TX-SR308&class=Receiver&p=d

Apr 28, 2010 | Onkyo HTR500 Receiver

1 Answer

Having trouble hooking up logitech surround sound system


Hi , just make sure that your PC has a 5.1 Channel Sound Card that can handle that Surround sound system
Thanks

Dec 28, 2009 | Logitech G51 5.1 Multimedia Surround Sound...

2 Answers

When i go to surround mode right front channel drops out


check for connection, might be the front right speaker was connected to right rear soround out, check recording if dolby pro logic or DTS system

Aug 31, 2009 | Denon AVR-3600

1 Answer

Surround sound dvd player/tv channels are fuzzy


Hi I have an RCA Truflat TV and a philips Surround sound dvd all in one system and a jvc dish system. I have had my surround working up until my nephews messed with it and hooked up a wii system to it. Now I get no sound on my surround sound and I have tried rearranging the cables but I can not get any sound from the surround sound and for the life of me I can not rember how I originaly had it set up. can you help?

Jun 24, 2009 | Samsung LT-P1745 17 in. EDTV-Ready LCD...

1 Answer

No surround back channel - damage during transport


I think your receiver has cracked main (amplifier) board close to surround back channel terminals. Need to take apart the receiver remove the board, inspect it and resolder cracked traces. Unfortunately it is not so easy to remove that board and probably you need to bring it to a repair shop.

May 18, 2009 | Denon AVR-4308CI Receiver

1 Answer

5ch/7ch stereo in 5 channel mode


Front panel button engaged for 5 or 7 channel operation? Also check front panel rear surround speakers button is engaged. Should get you back to 7.1 unless you have changed the rear surround speaker setup for a 2nd zone, also be sure you have a 7.1 DSP setting enabled.

Feb 22, 2009 | Denon AVR-2105 Receiver

2 Answers

Hi i cant get no sound other than frying inmt rear left and right spearkerall the other is working


YES check your connections and make sure you have selected the right INPUT signal source on your surround sound just remember RCA cables (yellow red white) goes from digital box,CABLE or SATELLITE OUTput to surround INput from there connect another RCA cable from the OUTPUT of the surround sound to the AV1 Input on the TV make sure AV1 is selected on the TV,if you dont know how just put the TV on channel 3 then press the channels down button and when the TV gets to channel 1 the next channel down from that should be AV1.Also make sure you have selected the right INPUT for the surround sound.

If you are not using RCA jack and just coax follow or you dont have a digital box.Connect the cable from the wall to the INput
on the surround sound the the cable OUT to the tv make sure the surround sound is Looking for a signal from the coax.

Nov 03, 2007 | Audio Players & Recorders

Not finding what you are looking for?
Marantz SR-6300 Receiver Logo

Related Topics:

98 people viewed this question

Ask a Question

Usually answered in minutes!

Top Marantz Audio Players & Recorders Experts

The Knight
The Knight

Level 3 Expert

73647 Answers

 Grubhead
Grubhead

Level 3 Expert

5017 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Marantz Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...