Question about Canon imageRUNNER 2200

1 Answer

Two-sided mode we can't seem to turn off this feature, we've even reset the machine, cancelled it several times, etc.  Nothing seems to turn it off.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers
Re: Two-sided mode

Go to the general settings (maybe under functions) and the default will be set out there to "2 sided" So all other types will need to be manually selected.
It is a simple fix.

Posted on Jan 09, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Everytime I copy from the adf top feeder, I get a black line running down the copy. I've cleaned, reset, etc., and I sitll get the black line every time. Help!!!???

CClean The MX882 ADF (Automatic Document Feeder)

Be sure to turn off the power and unplug the power cord before cleaning the machine.

  • The power cannot be turned off while the machine is sending or receiving a fax, or when the received fax or unsent fax are stored in the machine's memory. Make sure if the machine completed sending or receiving all the faxes before disconnecting the power cord.

  • The machine cannot send or receive faxes when the power is turned off.

  • If you unplug the power cord, all the faxes stored in the machine's memory will be deleted.

    Print the necessary faxes or save them to the memory card/USB flash drive before unplugging the power cord.

  1. Open the Document Tray.


  2. Open the Document Feeder Cover.


  3. With a soft, clean, lint-free and dry cloth, wipe off any paper dust from the inside of the Document Feeder Cover (A).


  4. After wiping, close the Document Feeder Cover by pushing it until it clicks into place.

  5. Close the Document Tray. speed printer service

Dec 18, 2012 | Canon MX882 All-In-One InkJet Printer

1 Answer

Hi, My Star TSP100 printer always goes offline after computer shutdown

Hi Valued Star Customer

It seems like the USB host may be going into "sleep mode" and not awakening. Please contact Star Support at for documentation.

Best regards

Star Technical Support

Feb 13, 2012 | Star Micronics TSP100 Thermal Printer

1 Answer

Hey Jack, we currently have 3 Zebra s600's, 2 in use and 1 spare. I've recently added some zp550 printers on the 2 computers that have the s600's and screwed up the drivers for the s600s. I...

1. Reset the printer - to return the printer configuration to factory default values,pressFEED and PAUSE at the same time while turning the power On (l).
2. Download this Maintenance Manual for Zebra S600 and follow the troubleshooting steps from page # 66.(table 3-2) Printer stops, pause and paper/ribbon LEDs both on / Printer stops, pause LED on and paper/ribbon LED flashing.
3.Uninstall / Re-install the zebra printer driver .Use this revouninstaller to remove the driverClick here to download the driver for Zebra S600 .

Oct 14, 2011 | Zebra Stripe S600 Thermal Label Printer

1 Answer

Hi, as i turn the printer on its start to print some code!! It seems its on the memory of the printer. Even if i unplug the usbcable it prints by itself. I tried do restore the default config but nothing...

If you are running Windows, then your printer buffer is trying to send the print job to the printer.
Look down below in the STATUS area near the time. See if you have a printer ICON. Select it and choos to CANCEL print jobs. Then after all jobs canceled, turn your printer back on.

Aug 02, 2011 | Zebra TLP 2824 Printer

1 Answer

Started out with paper, would start to load paper them as soon as paper stared in would stop. After several tries it would work. Then it stoped taking paper at all. Each time you try to print it stops and...

First I would remove the paper tray and check the rollers and print path for any scraps of paper that may be tripping up a sensor. If all seems well, ...

Try this next: It will reset the printer's configuration info.
To factory reset your Dell 1700 series printer follow these steps.
  1. Turn off your printer
  2. Open the front cover (push the button on the left side)
  3. Hold down the "Continue" and "Cancel" buttons and turn the power back on.
  4. When the "Error LED" light on the control panel is solid, close the cover and release the "Continue" and "Cancel" buttons.
Tip: To print a configuration sheet push the "Continue" button twice. This will give your printers IP Address.

Dec 31, 2010 | Dell 1700n Laser Printer

1 Answer

Incompatable Ink Cartridge HP C4480

Cartridge failed try another new one.
Yea it is new and should be good but they are machines and are prone to failure too.

Jul 24, 2009 | HP Photosmart C5180 All-In-One InkJet...

1 Answer

Cartridge seems to move smoothly. Just get the

There could be 2 reason for this error. You can either reset the error or try and clean the printer from inside which might be causing the problem. Below are the 2 steps:

STEP 1: Clean the printer from inside
  1. Opened the cover and checked the front right of the printer near the waste ink pads
  2. Carefully turn the cogs to move the ink cleaning mechanism
  3. There might be a load of paper jam debris blocking the mechanism from reaching its port
  4. Carefully cleaning this out and putting the printer back together

STEP 2: Reset the error

1) Close the print head cover, and turn off the printer. While pressing the Resume/Cancel button, press the Power button. (Do not release the buttons. The LED lights in green to indicate that a function is selectable.)

2) While holding the Power button, release the Resume/Cancel button. (Do not release the Power button.)

3) While holding the Power button, press the Resume/Cancel button three times, and then release the Power and Resume/Cancel buttons. (Each time the Resume/Cancel button is pressed, the LED lights alternately in either orange or green, starting with orange.) During initialization, the LED blinks in green.

4) When the LED stops blinking and lights in green, press the Resume/Cancel button the 4 times. (Each time the Resume/Cancel button is pressed, the LED lights alternately in either orange or green, starting with orange.)

5) Press the Power button. The LED lights in green, and the selected function is performed. (When the operation completes, the printer returns to the menu selection mode automatically.)

6) Power off then back on and test.

Apr 26, 2009 | Canon PIXMA iP90 Mobile Printer

4 Answers

I own a Lexmark 2400. It says align the cartridges has 2 bulls eyes, says print and when I do up comes this option is not available while printer is busy ok help. When I try to cancel out printing...

YOu can try first to unplug the ptinter and remove the cartridges for about 5 minutes and plug it back in, then after that check if you still have the same problem if you still have you can also try to uninstall and reinstall the printer software....

Dec 04, 2008 | Lexmark Printers & Copiers

2 Answers

Canon Pixma MP800

you need to clean and calibrate'll need to do that from the print manager, under maintenance

Apr 14, 2008 | Canon Pixma MP800 All-In-One InkJet...

5 Answers

Paper jam

Don't know if it's the same problem i had but its maybe worth a try. Canon MP160
My paper went in a little, the wheels were turning but it didn't take the rest of the paper or print.
Someone replied to my problem, i tried it and it fixed 1st time. Also seems to of worked for others

Solution:- Use a piece of thin card, a magazine cover is what i used, make sure its A4 size then try to print something, as the paper starts moving push it through! and hey presto it worked for me, everything printing fine now

Nov 12, 2007 | Canon PIXMA MP600 all-In-One InkJet...

Not finding what you are looking for?
Canon imageRUNNER 2200 Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Printers & Copiers Experts


Level 3 Expert

93802 Answers

old marine
old marine

Level 3 Expert

1294 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Canon Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides