Question about NetGear DG834G Router

2 Answers

I need my wep key for my netgear wireless router

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Mentor:

    An expert who has written 3 tips or uploaded 2 video tips.

    Governor:

    An expert whose answer got voted for 20 times.

  • Contributor
  • 62 Answers

The following steps will help you out in getting your wep key:-
1)Open the IE page and in the address bar type http://192.168.0.1/ or http://roterlogin.net/ , it will prompt with the small window asking for user name and password which will be admin and password respectively if not reset to something else.
2)If the default password is not working then router reset is mandatory which will terminate the internet connection and re-configuration has to be done from the beginning and after reset follow step 1 to get through the router administrator page and re-configure the entire setting's including the WEP key as well.
3)If , the default access is there then after getting into router administrator page , you will have a blue/purple column on the left hand side which has the different setting options in there.
4)Under the title set up you will find wireless setting's as one of the options so left click on that option and you will be navigated to wireless settings page.
5)Under wireless settings page we will have security option as an icon and out of the available different securities WEP will be the one that is highlighted and down at the bottom we will have five boxses for passphrase , key1 , key2 , key3 and key4.
6)The number in the key box determines your WEP key , in other words key1 box contains the WEP key .

Posted on Nov 19, 2009

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 40 Answers

If you cannot remember your WEP key, you are going to have to reset the router, log back into it and reset the password on it. On the back of the router there is a small hole with a button just on the inside. You will need a pin, needle or something to get in there. Press and hold that button for a few moments (5-10 seconds) let it reboot completely, go to 192.168.0.1 or 192.168.1.1 and it should ask for your administrative user name and password. Since you reset it, it generally is username: admin password: admin

Posted on Nov 13, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wep key for netgear dsi xl


The WEP key is set on your wireless router; it's basically a password for the wireless network. You can get the key by logging into the router, or by looking at the network properties of another device that is wirelessly connected to the router.

May 12, 2014 | NetGear WN111 (DHWN111100NAS) Pre-802.11n...

1 Answer

Cannot find wep key on net gear dg834g v4


to find the wep key of a netgear router, you first need to ensure that you are connected to the netgear router. after ensuring that you are connected, open a browser, internet explorer or firefox, type 192.168.1.1 or www.routerlogin.net it would now ask you for a username and password. username is " admin " password is the word " password " itself. you would see the netgear page next. click on " wireless settings " on the leftside of the screen. there you would see your WEP key on security options

Sep 11, 2011 | NetGear WGR614 Wireless Router

2 Answers

Cant find wep key


You will need to access the router (via its local web address using a suitable web browser) Once you have provided the login information, surf to the wireless security section and either document the WEP key (if not encrypted) or change it. Understand that changing the WEP key will invalidate any else's access, so be sure to share the change. The WEP key may have to be done in HEX, meaning that it must be done with the numerals 0-9 and ONLY the letters A-F. The ket must also be a specific length, usually 13 or 26 characters depending on the requirements of the router.

Aug 11, 2011 | NetGear WGR614 Wireless Router

1 Answer

LOOKING FOR MY WEP KEY FOR MY NETGEAR


The WEP encryption key is configured in the router's wireless settings. This encryption key is then used to configure the wireless card in the computer so it can connect to the wireless router.
I suggest you use WPA or WPA2 encryption, this is stronger than the old WEP encryption.
To secure your wireless network from unauthorized access, please click on this link and follow my instructions :-
Normal 0 http://www.fixya.com/support/r3559128-wireless_router_security

Oct 16, 2010 | NetGear DGN2000 Wireless Router

1 Answer

We forgot our wep key password for our netgear router. We just purchased a new acer aspire and want to set up the wireless.


You will need to log into your router create a new wep key. See your manual or the Netgear website for details.

Feb 28, 2010 | NetGear WGR614 Wireless Router

1 Answer

I cant connect a wireless adapter for xbox live it keeps asking for a wep key i dont know it how do i get it i have a netgear wireless router WGR614. can anyone help?


Your WEP key is the key (or passcode) you entered when you (or someone) set up your wireless router. If you didn't set it you need to ask whoever set up your router.

Dec 28, 2009 | NetGear WGR614 Wireless Router

1 Answer

WEP key fro netgear DG834G v3 WIRELESS ROUTER/MODEM


Okay, first you will need to access your router (usually 192.168.0.1 or something like that) you will be asked for a user name and password. (admin password respectively if you never set these up previously)

From there you would click on Wireless Settings and scroll down to WEP Key. Whatever is typed in Key 1 is your WEP key. Write that down. Plug in those numbers for your printer and you should be go to go.

Mar 21, 2009 | NetGear DG834G 802.11G Wireless ADSL...

1 Answer

Connecting lap top


If this is a new router you will find everything you need in the router's manual. You will need that to set up the WEP key. If the router has been used wirelessly before, then you will need the WEP key to set up the connection through the windows wireless connection wizard. If you don't know the WEP key, you will have to connect to the router with a cat-5 cable and access the router that way with your internet browser to find the WEP key, or generate a new one. You'll need to type in the router's IP address in the address bar of the browser.


If you find my suggestions to be helpful, please share with us some details so that others may benefit from knowing the whole story. Thank you!

Dec 26, 2008 | NetGear DG834G Router

Not finding what you are looking for?
NetGear DG834G Router Logo

379 people viewed this question

Ask a Question

Usually answered in minutes!

Top NetGear Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18392 Answers

Are you a NetGear Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...