Question about Televison & Video

1 Answer

Hyundai plasma model HP-4200

Hi there i have a hyundai plasma tv the problem is it wont turn on when you switch it on you can hear a relay click like most tvs and you can hear it tring to come on then you hear 2 more clicks from relays then nothing, on the rare occasion the tv will turn on and when it does you dont get the 2 more clicks, i have been looking at lots of other sites with no joy as i think i could fix my self as i have had the back off and most is big circuit boards that just unplug but dont no what to change .
any help would be most greatful.

Posted by on

  • tylerryder Feb 22, 2009

    i have the same ploblem can anyone help



1 Answer

Hello ****, I have the same problem. However. I manage to get the TV on by pulling the cable out and then plug it back in again several times. A couple of times just after you have heard the first click and the a couple of times just when you hear the second click. Sudenly the TV decided to work again. I think it must be a problem with one of the two relays that sits next to each other near the centre of the TV. If you take the back of and then plug the power back in you will see the two lights next to those relays come on and then die out when the relays let go. This is what hapens if the TV doesnt work. If the TV works those lights/LED's will stay green and the relays will hold on and feeding the TV screen. I will probably try to see if I can buy replacement relays and replace these. If I can get hold of them, then probably I would take the existing relays appart to see if I could see any fault. If those relays ar ok and the replacement relays appear in the same manor like the old ones I would look for problems before those relays. Maby order a new circut board from Samsung.


Posted on Oct 20, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Will not turn on I have already replaced the Samsung plasma TV pn60e530a3fxza pwr supply

Samsung Plasma TV - Won't turn on - Forums - CNET > Forums > Samsung

CNETJun 11, 2015 - I have Samsung 50" plasma tv model HP-S5053. The unit would not power on and blue light was out. Tried a different power source which did not change result. Samsung TV LN52A650A1FXZA won't turn on, keeps clicking
Jun 11, 2015
Samsung TV won't turn on
Jun 11, 2015
Samsung LCD TV LN32A330 power won't turn on
Jun 11, 2015
TV won't turn on
Jun 10, 2015
More results from

Samsung 50 inch plasma wont turn on - YouTube

? 0:59
Jan 9, 2014 - Uploaded by 8Jallin
Samsung 50 inch plasma wont turn on. 8Jallin ... Up plasma tv not working, wouldn't turn on, FIXED, repair, diy - Duration: 14:56.

Feb 09, 2016 | Samsung Televison & Video

2 Answers

2001 hyundai elantra-winshield wipers not working and it is not the fuse under the dash. could it be the fuse relay under the hood?

It could definately be the wiper relay, and it could also be the wiper motor. If you put a long screw driver on the relay and have someone turn the wipers on with the key on, you should be able to hear the relay clicking as it opens and closes. Sometimes you can put your finger on the relay and feel the relay switching. If you can hear/feel the relay then the next step is the wiper motor. Hope this helps.

Mar 23, 2011 | Hyundai Elantra Cars & Trucks

1 Answer

Hi I have a LG 42' plasma, but it wont turn

Hi Paul, This seems to be a common issue in most of the plasma flat screens. You are almost accurate in guessing the reason of trouble. The issue with the TV is mainly with the power board itself which happens in most models. Even though if you try replacing board level components you will finally end up in replacing the power board for sure. I managed to find a contact who can help with spare parts of most of the plasma models...i am posting it here for your reference. plasma TV parts-- Steve Hu: .
Have a nice day!!!!

Sep 11, 2009 | Televison & Video

1 Answer

Hp TV wont stay on cable setting

contact us for legal action agaist HP for this model HP tv. They sold this TV with known defects.

Jun 22, 2009 | HP PL4260N 42 in. Plasma HDTV

1 Answer

Plasma Hyundai 42'' TV ,NO SOUND OR PICTURE

most times then not it's the capacitors on your power board that blew there for not supplying the tv with enough power if you open it up and check the capacitors it should be leaking some kind of liquid or the tops have bubbled up. its an easy fix cost>>2 dollars each

May 21, 2009 | Televison & Video

1 Answer

Acer 4200 shut down wont start up

charged batery dumb bastered????????????????????????me

Mar 22, 2009 | Acer TravelMate 4200 Notebook

2 Answers

Panasonic th-42pa20 plasma 42 inch tv

Try to replace the Main Power Supply board first.

Dec 29, 2007 | Panasonic TH-42PA20U/P 42 in. Plasma EDTV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

447 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75017 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Cindy Wells

Level 3 Expert

5301 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides