Question about Iomega ScreenPlay Pro MP3 Player

2 Answers

I have a IOMEGA Screenplay Pro HD 1 TB drive. It was all working fine on TV and PC. But suddenly after I used it with my PC for transferring files, I switched it off and then connected it to the TV. Now the blue light just keeps blinking even if I keep it on for 10 mins. On the TV Screen, the IOMEGA Screenplay Pro logo will come up and then disappear and the TV will remain blank after that. Any Ideas..?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Have u tried the tv sys button on the remote ? reperat a few times as it cyclels thru the formats. or the source button. first disconnect the usb
-will power

Posted on Dec 03, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi, thirst of all sorry for my English. I have the same problem with Iomega. May be you find out something?

Posted on Nov 16, 2009

  • mariusrisys Nov 16, 2009

    I have the same problem with Iomega. May be you find out something?

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i download from piratebay to my iomega screenplay dx


You may not be able to do it directly, as torrent portals such as the piratebay are supposed to use a specific client software (i.e. uTorrent, nTorrent, etc.) which only can be installed on PCs.
Download the items into your PC, and then you can transfer them onto DX via USB.

Feb 03, 2013 | Iomega 35039 1 TB ScreenPlay DX HD Media...

1 Answer

Iomega screenplay dx


It may depend on what type of file system you chose when formatting it. For file-type support beyong 1.5 Gb, such as high-resolution videos, aka. HD movies, Iomega should be able to recognize NTFS file system. Perhaps you chose FAT, or FAT32? In that case Iomega may not recognize it.

Jan 21, 2013 | Iomega 35039 1 TB ScreenPlay DX HD Media...

1 Answer

Iomega screenplay firmware


you dont't update firmware. screen play dx latest firmware lot of bugs and not respond remote controller after 30min playable movie.

Aug 16, 2012 | Iomega 35039 1 TB ScreenPlay DX HD Media...

1 Answer

I need to download iomega Screenplay 1T user manual


You should be more specific with which unit you have when asking questions about it.
ScreenPlay Director HD Media Player: User's Manual: View Online [HTML] http://www.iomega.com/support/manuals/hdd2010/spdirector/en/main.html
ScreenPlay Multimedia Drive: User's Manual: View Online [HTML] http://www.iomega.com/support/manuals/hdd2008/scrnply/en/consolidated/main.html#scrnply
ScreenPlay 60GB Multimedia Drive User's Manual: http://www.iomega.com/support/manuals/allhdd/screenplay/en/main.html
ScreenPlay HD Multimedia Drive: User's Manual: View Online [HTML]: http://www.iomega.com/support/manuals/hdd2008/sphd/en/main.html
ScreenPlay Plus HD Media Player: User's Manual: View Online [HTML] http://www.iomega.com/support/manuals/hdd2010/scrnplyplus/en/main.html
ScreenPlay Pro HD Multimedia Player: User's Manual: View Online [HTML] http://www.iomega.com/support/manuals/hdd2010/scrnplyprohd/en/main.html
ScreenPlay TV Link User's Manual: View Online [HTML] http://www.iomega.com/support/manuals/hdd2010/sptvlnk/en/main.html
ScreenPlay TV Link HD Media Player Director Edition: User's Manual: View Online [HTML] http://www.iomega.com/support/manuals/hdd2010/sptvlnkdir/en/main.html

Oct 10, 2010 | Iomega ScreenPlay

1 Answer

I have bought a IOmega Screenplay Pro 1 TB. I was able to see some partition in the HD. Accidentally all these partition were removed. So i need to create those partitions and the size details of each...


ScreenPlay Director Partitions There are five partitions on the ScreenPlay Director's hard disk. Three partitions are grayed out and will list as "Healthy-Unknown" in Windows Device Manager. These partitions contain the ScreenPlay TV interface and system settings and are not available to store media files. The two active partitions both appear as "Untitled". The larger partition is formatted with an NTFS file system. Use this partition to store your media files when you connect to the ScreenPlay Director from a networked computer or transfer files via direct USB connection. The smaller partition is formatted FAT32 and is used only when updating the ScreenPlay Director firmware. Do not place your media files on this partition! If you accidentally store media files on the FAT32 partition, you can use a computer to move them to the larger NTFS-formatted partition. You will not be able to see media files on the FAT32-formatted partition when using the ScreenPlay TV interface. Formatting the data partition will erase all existing data! If you have files on the ScreenPlay Director you want to save, move them to another drive or volume before reformatting.
*******************************************CAUTION!********************************************************* Do not change (format or delete) the partitioning on the ScreenPlay Director hard disk as this will remove the firmware that enables the ScreenPlay Director to communicate with your TV set. Only media files stored on the active data partition (the largest partition) can be viewed or played on a TV. The ONLY partition that can be formatted is the data partition (the largest partition).
Conclusion: If you have deleted or formatted any of the first 4 partitions on the unit that is not the data partition. You now own a BRICKED ScreenPlay which HAS to be replaced. No if ands or buts about it. YOUR DEVICE IS DEAD.

Feb 22, 2010 | Iomega ScreenPlay

1 Answer

Resolution not supported error on Iomega SCREENPLAY HD 500gb


Avi files should be 700 or below when playing on a conventional tv,625 or 525 prefered.
if set to hd format trough HDMI output the display warning will not appear has the iomega will upscale trough the HDMI output,and will suport any resolution.

Nov 11, 2009 | Iomega ScreenPlay

2 Answers

Iomega Screenplay Pro HD Multimedia Drive works on PC but not on


If the blue light continues to flash after the screen goes black, then you need to reinstall the firmware. Look at http://screenplayprohd.wikia.com for information about getting the firmware and installing it.

If the blue light goes solid after the screen goes black then you probably just need to switch the NTSC/PAL selection. Press that button on the front panel several times, waiting a few seconds inbetween in press. If it continues to be invisible, plug the drive into another TV using the composite cables instead of HDMI to confirm if the menu comes up at all. If it does, reinstall the firmware.

Sep 14, 2009 | Iomega ScreenPlay

2 Answers

Iomega Screenplay Pro HD - No Menu


I had the same problem with the Screenplay Pro HD. My Iomega was working fine and one day after exchanging files with a friend I got the logo, then the loading message and then it went into a black screen while the blue light kept blinking.
Obviously the connection to the TV was fine because the logo appeared.
I solved the problem by downloading and reinstalling the firmware.
I downloaded the firmware from the iomega web site.
Notice that during the installation process you get the message that it will delete your data and then shortly after you have the option to delete or keep it. Hang in there. This part is a little nerv wrecking.

Hope this helps.
Rainer

Jul 10, 2009 | Iomega ScreenPlay

1 Answer

Iomega Screenplay buzzing no Disc wont bring up Folders


I have a Screen Play HD. It was working fine until today when suddenly all my computers can't detect it. I tried a different external disk, it worked fine.

Jul 06, 2009 | Iomega ScreenPlay

1 Answer

After transfering all my avi files to my iomega screenplay hd multimedia drive. the avi video files play without sound


Could be that your Iomega player is lacking the same type of Codec that was used to encode the Audio in the AVI Files.

Dec 03, 2008 | Computers & Internet

Not finding what you are looking for?
Iomega ScreenPlay Pro MP3 Player Logo

2,238 people viewed this question

Ask a Question

Usually answered in minutes!

Top Iomega Audio Players & Recorders Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

juanmireles1

Level 2 Expert

214 Answers

Tom Chichester

Level 3 Expert

34255 Answers

Are you an Iomega Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...