Question about Pioneer PureVision PDP-4330HD 43 in. HD-Ready Plasma Television

1 Answer

Pioneer PDP-4330HD - turns iteself off - resets

I've been having a problem with my Pioneer PDP-4330HD set. It happened a couple of times before, but last night happened about 4 times. The set turns itself off, and the ready light is off. After about 5-10 minutes it turns itself back on. It feels like a breaker is tripping, then resetting. However, the manual has no info on how to deal with this. Any ideas?

Thanks!

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I bought a 503 which had this problem, it would stay on for anything between 10 mins & 3 hours.
the guy told me he had been told it was a condensation sensor.
All I did was take back off, blow it out all boards with an air line, disconect fans. I ve had it 6 months now with not a single problem.

Posted on Jan 09, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Tv won't come on...light in corner just blinks red


OK Its your power supply and it can be fixd for free due to a recall.
PLEASE READ BELOW what I found out.
Here's the whole notice:

Important: Free Power Supply Replacement for Certain Pioneer Plasmas

Pioneer is continuing to offer a free, in-home power supply replacement for certain of its second and third generation plasma models listed below for consumers who experience a problem with the original power supply. If a consumer model is not listed below, no power supply replacement is needed and no further action needs to be taken.

If you own or use a plasma listed below, please call our toll free hotline at 1-800-421-1404 to arrange a time to have your plasma's power supply upgraded in your home at no charge.

Consumer Plasma Models (12 listed):

PDP-505HD
PDP-503PU
PDP-5030HD
PDP-5031HD
PDP-433PU
PDP-4300
PDP-4310
PDP-4330HD
PRO-800HD
PRO-800HDI
PRO-1000HD
PRO-1000HDI
The issue with the power supply in the plasmas listed above does not pose any health or safety risk. Pioneer has received reports that the power supply in the affected models may fail. In some cases, a loud popping sound can be heard when a power supply fails. After the power supply fails, the plasma is no longer operable.

We apologize for any inconvenience, and we thank you for your cooperation.

Apr 02, 2010 | Pioneer PureVision Pro-800HD 43 in. Plasma...

2 Answers

I turn my Pioneer plasma HDTV on and it kicks off.


Way too many possibilites can cause this. The most common is a problem with the Plasma panel. Sorry. Best to get an estimate and get a price on the estimate cost. A free estimate will be worth the price - use a Pioneer service center.

Mar 30, 2010 | Pioneer PureVision PDP-4330HD 43 in....

1 Answer

Pioneer PDP 4330HD display flashes red LED 4 times


Hello,

Just seeing if you had resolved the problem as my mum's Pioneer PDP-433HDE which she bought back 2002 has developed this same fault.

It has been a perfect TV and done very well with plenty of good use, but I have a feeling the cost of repair - even if it is possibale will be costly.

Cheers

Nigel

Mar 13, 2010 | Pioneer PureVision PDP-4330HD 43 in....

1 Answer

Where can I find a replacement box


check with Tops Electronics in Haverhill ma
check there web site topselectronics.com they have a site on ebay..I know they had one or 2 check it out

Sep 28, 2009 | Pioneer PureVision PDP-4330HD 43 in....

1 Answer

Loud pop and tv will not come on


Power supply is gone order a new one.
brcurtis

Sep 22, 2009 | Pioneer PureVision PDP-4330HD 43 in....

1 Answer

I have a Pioneer pdp-433 plasma with a media receiver pdp-ro3e. When switching it on it gave a loud pop and blew up a fuse in the meter cupboard. Now when switching it on it gives green light on receiver...


Alas, the powerblock has gone.

Common problem on this model.

Only solution is replacement powerblock.

Pioneer used to repair this for nothing even out of warranty (they did for me), but they may not be so willing now, as your tele must be at least 6 years old. Unfortunately, it will be cheaper to buy a new TV than to pay for a contractor to fix it.

Brian

Jul 13, 2009 | Pioneer PureVision PDP-4330HD 43 in....

2 Answers

Loud pop and tv went off...


Here is a solution from the Pioneer web site:

http://www.pioneerelectronics.com/PUSA/Support/Important%3A+Updated+Information+Regarding+Free+Power+Supply+Replacement+for+Certain+Pioneer+Plasmas
Important: Updated Information Regarding Free Power Supply Replacement for Certain Pioneer Plasmas Pioneer is continuing to offer a free, in-home/office power supply replacement for certain of its second and third generation plasma models listed below for customers who experience a problem with the original power supply. If a model is not listed below, no power supply replacement is needed and no further action needs to be taken.
If you own or use a plasma listed below, please call our toll free hotline at 1-800-421-1404 to arrange a time to have your plasma's power supply upgraded at your residence or office at no charge.
Plasma Models (15 listed):
  • PDP-505HD
  • PDP-503PU
  • PDP-5030HD
  • PDP-5031HD
  • PDP-433PU
  • PDP-4300
  • PDP-4310
  • PDP-4330HD
  • PRO-800HD
  • PRO-800HDI
  • PRO-1000HD
  • PRO-1000HDI
  • PDP-433CMX
  • PDP-502MX
  • PDP-503CMX
The issue with the power supply in the plasmas listed above does not pose any health or safety risk. Pioneer has received reports that the power supply in the affected models may fail. In some cases, a loud popping sound can be heard when a power supply fails. After the power supply fails, the plasma is no longer operable.

Anyone with questions can call Pioneer's toll free hotline at 800-421-1404.
We apologize for any inconvenience.

Aug 09, 2008 | Pioneer PureVision Pro-800HD 43 in. Plasma...

1 Answer

Pioneer pro800hd plasma just made a loud pop and then went to black the power button(red led) is flashing. power supply??, flyback xformer??? any ideas. worth fixing??


The affected models of consumer plasmas are listed below. Anyone who owns or uses one of these models may contact Pioneer through its toll free hotline at 800-421-1404 to arrange for the free, in-home upgrade. If a consumer model is not listed below, no power supply replacement is needed and no further action needs to be taken. If consumers are not sure if their plasma is affected, they should call the toll free hotline for confirmation.
Consumer Plasma Models (13 listed): PDP-505HD PDP-4330HD PDP-503PU PDP-4300 PDP-5030HD PDP-4304 PDP-5031HD PDP-4310 PRO-1000HD PRO-800HD PRO-1000HDI PRO-800HDI PDP-433PU

Dec 30, 2007 | Pioneer PureVision Pro-800HD 43 in. Plasma...

3 Answers

PDP-4330HD


This exact same problem happened to me 2 weeks ago on my Pioneer PDP-4330HD, and it did indeed turn out to be the power supply. The good news is, you can get it fixed for free, because Pioneer actually recalled the power supply in this plasma and others a couple of years ago.

Here is a link to the announcement on their website concerning the recall. They say that they will do a free in home replacement of your power supply, but when I called the local pioneer repair place, I was told I would have to wait three weeks for an in-home appointment. I ended up taking it in myself, and it was fixed for free 2 days later. Now it works perfectly.

Here's the number to call Pioneer in case the link goes down:

1-800-421-1404

Nov 10, 2005 | Pioneer PureVision PDP-4330HD 43 in....

Not finding what you are looking for?
Pioneer PureVision PDP-4330HD 43 in. HD-Ready Plasma Television Logo

Related Topics:

368 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75846 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Jaime Hernandez

Level 3 Expert

2336 Answers

Are you a Pioneer Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...