Question about Samsung CLP 300 Laser Printer

2 Answers

Reset transfer belt samsung clp-300

Hi, how can I reset the transfer belt?
printer don't work saying there's a problem with transfer belt, but I don't want to change it! thank you for your answer!

Posted by on

  • Jim2theA May 11, 2010

    If this is the case where is the resistor located? I assume it is on the transfer belt itself? and Do you know the resistance of it?

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 417 Answers

Unfortunately you cannot there is a resistor on the unit that when you replace it it blows resetting the transfer counter.

Sorry
J

Posted on Jan 20, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 166 Answers

You need to reprogram eprom on the image unit if you have electronics knowledge you can easy to fix your problem

Posted on Jan 06, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Says transfer belt error, do i need to replace or can i fix?


HI,

The Transfer Belt error is because it is not correctly installed or it is defective,if so it need replacing.

You can Pull out of the Drum Unit, open front door and take out the whole assembly

Then you can look on the Transfer Belt, You can pull it out,
CAUTION: it is difficult to get it back into position again if your not sure what your doing.

You can replace the belt for around $40/$60 for the item + technician fees

Please RATE THIS SOLUTION
RNJ VINOD KUMAR

Sep 24, 2009 | Samsung CLP 300 Laser Printer

1 Answer

Samsung CLP-300, Replace transferbelt messagge on smart panel. Did replace with new,still same message. prints counts did not reset (60002)


you press menu until setup is displayed, right arrow until maint. is displayed. right arrow until check others is displayed. right arrow until transfer belt is displayed, press enter and it will ask count? or reset? choose reset, press enter. press stop to return to main menu...should be done!

Sep 15, 2009 | Samsung CLP 300 Laser Printer

1 Answer

Transfer belt error problem


*Check patch sensor *Alternatively your IBT belt needs to be replaced

Aug 24, 2009 | Xerox Phaser 6110MFP All-In-One Laser...

3 Answers

SAMSUNG CLP 300


This problem is caused by the Developer Unit. On this printer it is a Consumable item, o you ned to replace the developer unit.

Mar 25, 2009 | Samsung CLP 300 Laser Printer

1 Answer

Internal error on samsung clp 300


what you need to do is get a new transfer belt, if you email the company they should give you a new one.

Feb 02, 2009 | Samsung CLP 300 Laser Printer

5 Answers

I have a Samsung that say Transfer Belt Error


Hi
I have a utility to reset the consumables errors on this printer, but only if the component is past its lifecount. (60k for transfer belt)

Its called CLP-300_Reset_RLCv04.exe or just RLCV-04.exe (if you can find a copy)

If you need a copy, let me know and I'll find some way to get it to you.

I've used it for transfer belt reset and it works.

Dec 19, 2008 | Samsung CLP 300 Laser Printer

2 Answers

Transfer belt error on CLP 315


it could be just that the imaging unit is not sitting correctly on it's tracks remove and also proceed and taking the other unit behind it and just simply replace back carefully on it's tracks

Nov 27, 2008 | Samsung CLP 300 Laser Printer

1 Answer

I want to reset the transfer belt


Unfortunately you cannot as there is a resistor on the unit that blows and resets the transfer counter.

Sorry
J

Jan 08, 2008 | Samsung CLP 300 Laser Printer

Not finding what you are looking for?
Samsung CLP 300 Laser Printer Logo

6,364 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Office Equipment & Supplies Experts

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

HEMANT GROVER

Level 2 Expert

166 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Are you a Samsung Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...