Question about Frigidaire Freezers

1 Answer

Frigidaire fridge freezer not getting cold

I cleaned and defrosted my fridge freezer ( Frigidare, Elite, model FR3009, serial number 004037978) a bit too vigorously. Now it is plugged back in it has failed to get cold again. The power light is on but fridge nor freezer is getting cold and I cant hear any noise like the motor. At the bottom at the back, there is a bundle of wires and box things. I think maybe something got disconnected here, but dont know what it is supposed to look like.
Can you help please?

Louise

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Frigidaire Master
  • 909 Answers

Louise, this is a big area. I would switch off the fridge, look at the back where you see the" box things". You should see a timer which is white or black (wires comming out of it).. It has a short type of knob which can be turned manually clockwise.. Turn about a 1/4 turn then try and switch on again. If not, thermostat will be the problem. Assuming you never disrupted any wires.

Posted on Nov 13, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What size is a frigidare 297080400 upright freezer


Hello friend, thank you for your post!

In order to provide you accurate information could you provide me with your model number please? Normally you can locate the serial tag (which lists your model number) on the inside wall of your freezer. With that information I can provide you with the cubic ft. of your freezer. I look forward to helping you further. -Matt

Oct 04, 2014 | Frigidaire Freezers

1 Answer

We have a Kenmore Elite Freezer Model #253.29082994. We had the freezer plugged in and it was working fine. We unplugged it and moved it and now when we plug it in it won't start. Is there some kind of...


You refrigerator was made by Frigidaire Adaptive Defrost Controls Frigidaire Refrigerator Trouble Shooting and Diagnosing
On the initial plugin, or when power is restored to the fridge after a power outage:
If terminating thermostat is open, the fridge enters a compressor (cooling) cycle.
If the terminating thermostat is closed, the first defrost cycle occurs 1 hour
after initial plug-in.
Maximum defrost cycle time is 24 minutes.
Minimum time between defrost cycles is 6 hours. (compressor runtime)
Maximum normal clock time between defrost cycles is 12 hours.
Maximum time between defrost cycles (in "vacation" mode) is 72 hours.
Vacation mode is not entered unless the door has not been opened in at least 24 hours.
Note that the ADC will only enter the defrost mode if the terminating thermostat is closed. If the terminating thermostat is open when defrost is initiated, the ADC board will wait for six minutes and then return to the cooling mode.
ASSUMING that the fridge has been on and running,
and the terminating thermostat is closed,
defrost is initiated by pressing the door (light) switch
at least five times within six seconds.
The defrost heater should start heating up within 8 seconds.
If the above procedure caused the heater to heat up, the ADC board is probably bad; replace it.
If the defrost heater does not heat up, test the defrost heater, terminating thermostat and cold control for continuity as follows:
Unplug the fridge from the wall. Unplug the ADC board from its connector.
Test the connector for continuity between the following leads:
Defrost Heater = DEF TERM (blue) to DEF OUT (brown).
Terminating Thermostat = DEF TERM (blue) to NEUTRAL (lt blue).
Cold Control = COLD CONTROL (orange) to L1 (black).
Replace the defective component.

dvfxnxxsllnll3xsyszyldhiovfnqznnvujbtluyw2q4uxl2ntjkcdj6njhpmxnefkntwws4bi9kdg83ay5nd0jdsnhpljetrth0supsduvxugpczlkyaszhzu1onu9xwdfjv0xta0jidtfiwg%3d%3d

Apr 26, 2011 | Kenmore Freezers

1 Answer

My freezer is getting cold but the fridge is not getting that cold what do i need to do? the motor is working


Hi, Try to defrost the fridge. Sometimes air flows stops due to access of ice in the freezer. Try to defrost it and see if it works.
Regards, polysandy

Apr 24, 2010 | Frigidaire 20.3 cu. ft. Upright Freezer...

1 Answer

Fridge not cold enough and frost buildup in the


Your problem is probably one of the following:

* defrost thermostat
* defrost heater(s)

Contact an appliance service company.

Feb 16, 2010 | Frigidaire Freezers

1 Answer

Top shelf of frigidare manual defrost freezer only freezing, other shelves are not cooling.


Is the condenser clean? If it is you may have a refrigerant leak or an inefficient compressor.

Jun 28, 2009 | Frigidaire Freezer Refrigeration White...

1 Answer

Side by side fridge not cooling, not making ice


if it seems like the evaporator is getting cold then your sealed system should appear to be ok. you need the evap fan to transfer cold air into fresh food section. if not turning u need to replace fan motor. make sure your not getting to much frost build up on the evap.

Jun 24, 2009 | Frigidaire Freezer Refrigeration White...

1 Answer

Samsung fridge/freezer model SRS73DTA doesnt freeze.


Hi I have the same problem,
did you get an answer to your question..?

Jan 19, 2009 | Freezers

1 Answer

My freezer's defrost systems runs constantly


i dont think so i would look at the compressor kicking out on thermal overload or a faulty thermostat thermostats have two settings cut in cut out your cut in could be bad and not turning the compressor on till the temp reaches melting temps now if your hearing a click buzz then you need to look at the compressor and make sure the compressor fan is running but its not a defrost promblem

Sep 11, 2008 | Frigidaire Freezer Refrigeration White...

1 Answer

Freezer not getting cold to freeze


ok if this fridge uses a defrost timer, it's probably stuck on defrost or the defrost thermostat is faulty also check the number on your thermostat it its on a low number the fridge won't cool properly also a refrigerant leak could be suspected.

May 17, 2008 | Frigidaire 20 cu. ft. / 566 liter Upright...

Not finding what you are looking for?
Freezers Logo

Related Topics:

990 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Freezers Experts

AJMAL KHAN

Level 2 Expert

382 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

John Tripp
John Tripp

Level 3 Expert

4654 Answers

Are you a Frigidaire Freezer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...