Question about Tools & Hardware - Others

1 Answer

My paslode im35o will not fire at all. With new gas and

My im35o will not fire at all. With new gas and fully charged battery it won't even start the ignition sequence. It has been cleaned and was working fine. This happened immediatly and has not been the result of a problem getting worse. No doubt it will cost alot to fix. Have been quoted 75 quid just to find cause of problem, can anyone recommend a good repair centre near Gatwick

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 55 Answers

Before you send it to a repair shop you should try and adjust the front nailing regulator sometimes it gets moved back all you have to do is loosen the allen wrench screw that holds it in place it is located in the top front of gun and try sliding it forward a little bit because if it is back too far then it will not fire. Try this before spending any money on repairs.

Posted on Dec 02, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Paslode impulse framing nailer , iv cleaned gun and oiled , the fan works etc . seems to only fire if i have fully charged battery ,once used for about five minutes it stops firing . only way to get it...


When it stops firing is the little light on the side of the handle green or red? If it is red then the battery is draining down too quickly. Either the fan switch has malfunctioned causing the fan to run all the time (I have seen this before) or you got either a faulty battery or charger.

Mar 05, 2012 | RTO PasLode 900420 Impulse Framing Nailer

1 Answer

My paslodes will not fire with a fully charged battery and a new full cell. It only makes a sound like its engaging


Hi,

Here is a tip that I wrote about the Paslode nailers and the problems that can come up with them.

I also have a link to the Paslode manuals which contain Paslode cleaning and troubleshooting guides.

If you need parts for your Paslode, there also is a link for a site that sells the Paslode nailer parts.

Paslode Cordless Nailer Problems



heatman101



][\[\]

Feb 22, 2011 | RTO PasLode 900420 Impulse Framing Nailer

1 Answer

Paslode impulse finishing gun wont fire. battery fully charged and gas is full.


Hi,

Here is a tip that I wrote about the Paslode nailers and the problems that can come up with them.

I also have a link to the Paslode manuals which contain Paslode cleaning and troubleshooting guides.

If you need parts for your Paslode, there also is a link for a site that sells the Paslode nailer parts.

Paslode Cordless Nailer Problems



heatman101



,.//,

Jan 01, 2011 | Omega Paslode 901000 Impulse Cordless...

1 Answer

I changed the gas cylinder in my paslode framing nailer and now it won't fire the nails at all. The battery is fully charged and the whirring sound and smell of gas is evidenced but no nails are fired.


Make sure you have the correct gas cylinder. There are more than one type of cylinders for these nailers. If it is not correct it won't seat and gas will leak. Whiring sound is normal, fan mixing oxygen. Make sure "O" ring is in place under the gas cylinder.

Oct 01, 2010 | RTO PasLode 900420 Impulse Framing Nailer

1 Answer

I have Paslode IM 250 A nail gun, the battery is fully charged and a half used gas cartridge but I can not get it to fire.


Hi,

Here is a tip that I wrote about the Paslode nailers and the problems that can come up with them.

I also have a link to the Paslode manuals which contain Paslode cleaning and troubleshooting guides.

If you need parts for your Paslode, there also is a link for a site that sells the Paslode nailer parts.

Paslode Cordless Nailer Problems



heatman101



';]][

Sep 15, 2010 | Craftsman Nailer Kit, Palm Air Driver

1 Answer

Paslode im 250 the fan goes on but it does not fire when depressed. I have tried a new gas cylinder


Make sure the battery is charged - it will not provide good combustion.

Next - make sure the plunger is fully depressed - there is an adjustment on the side.

Finally - check for proper operation of the trigger.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for helping with your FREE question

Sep 02, 2010 | RTO Paslode 902000 IM250 Ii Cordless 16...

1 Answer

Paslode nail gun 325 black not firing


Any time these guns become intermittent or stop firing but the fan still runs, the first the to check is the expiration date on the gas cartridges. The do expire and this will make the gun work inconsistently or not at all.

Dec 08, 2009 | RTO PasLode 900420 Impulse Framing Nailer

1 Answer

She wont fire, just bought from ebay


1.If fan is work check gas cell(use only paslode gas) and best before date(expired date)
2.If fan isn't working check that the battery is fully charged.
3.Make sure filter is clean and you can see through it.(no dirt or grit)
4. If after that it still isn't working you will have to take to your nearest paslode repair agent.(check on there web site for your local repairer)

good luck.!

Nov 04, 2009 | RTO Paslode 902000 IM250 Ii Cordless 16...

4 Answers

Paslode 350 wont fire


Hi,
Probably needs cleaning. You`ll need two new o`rings.

Aug 19, 2009 | RTO PasLode 900420 Impulse Framing Nailer

Not finding what you are looking for?
Tools & Hardware - Others Logo

Related Topics:

124 people viewed this question

Ask a Question

Usually answered in minutes!

Top Tools & Hardware - Others Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Brad Brown

Level 3 Expert

15633 Answers

J.D. Browning
J.D. Browning

Level 3 Expert

2760 Answers

Are you a Tool and Hardware - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...