Question about D-Link DI-624 Air Plus XtremeG Wireless 108G Router (790069250842)
Did you install the AirPlus Software?
Have a Great 2008!
Posted on Jan 08, 2008
Tips for a great answer:
Feb 15, 2014 | D-Link AirPlus DI-524 Wireless Router
Apr 07, 2013 | D-Link AirPlus G DWL-G730AP Wireless...
May 19, 2010 | D-Link DWL-922 Kit (DWL922)
Sep 16, 2009 | D-Link AirPlus G DWL-G730AP Router
Mar 12, 2009 | D-Link AirPlus DI-614+ Wireless Router
Apr 18, 2008 | D-Link DI 514 Wireless Router (DI-514)
Nov 08, 2007 | D-Link DI-514 / DWL-520 Kit...
none/blank. Initially, to acces some ISPs, the DLink would also ask for a password but once set will never ask again except when a reset is done.
On the old PC with the D-Link DWL -G122:
1. there is no need for a network key since you are not using one (as you posted) and therefore should be set to Open/Disabled/Not used;
2. When you installed the software from the CD that came with the D-Link USB wireless adapter on the old PC, other than the usual driver, it is highly possible that another software was installed. This is the DLink Configuration Utility which should be used to configure/connect the G122 rather than the built-in Windows WiFi Configuration. You can verify if this was installed under your Start/All Programs/D-Link Air USB/D-Link Air Utility. If present, use this to initially configure the G122.
hope this be of some help/idea. Pls post back how things turned up or should you need further information.
Good luck and kind regards.
Oct 24, 2007 | Routers
Feb 16, 2006 | D-Link AirPro DI-764 Wireless Router
Feb 16, 2006 | D-Link AirPlus DI-614+ Wireless Router
251 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: