Question about Copystar CS-1500 Copier
It means your waste toner is full. Pull the process unit and look on the each end for a screw on each side that are recessed. Remove them and take out the small panel that acts as a plug. Empty the excess toner out of each side and put covers back on. Then put your process unit back in go into the service mode. Press stop/clear button hold down, while holding press start button keep holding both buttons and then press the left side exposure button..hold all 3 buttons for approx 20 seconds till U comes up and starts flashing. Use the buttons under the display and put in 100 and press start to reinitialize the developer. After the unit stops initializing turn it off and on and you should be all set.
Posted on Dec 03, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Jun 03, 2011 | Canon Cameras
Mar 22, 2011 | OKI C5500n Laser Printer
Jul 08, 2010 | Oki Electric Industry C6150N Laser Printer
Sep 14, 2009 | OKI C5500n Laser Printer
Aug 14, 2009 | Office Equipment & Supplies
79 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: