Question about Whirlpool GHW9200L Front Load Washer

1 Answer

Whirlpool Duet WFW9200SQ has knocking sound located under drum under or near motor. Knocks during spin up and down cycle and on last highest spin.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 44 Answers

The problem is a cracked spindle on the back of the drum. It most likely also tore up the grey plastic front shield.The only thing to do is throw the machine out sine the drum cost parts onle is over $400 for drum, and over $400 for the front plastic.l

Posted on Dec 06, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ftf530es knocks during spin cycle


Good Afternoon Amy,

I understand that your Frigidaire washer, model# FTF530ES, knocks during the spin cycle. I also see that the drum moves from front to back and not up and down. I suggest making sure that your washer is level from front to back, side to side, and from corner to corner. If after leveling you washer, the drum is still moving from front to back, I suggest contacting your local authorized technician for further assistance. They will be able to diagnose your washer and determine why the drum is moving from front to back. Hope this is helpful.

-Best Regards-
WP

May 15, 2014 | Frigidaire FTF530FS Front Load Washer

1 Answer

Duet Washer rattles and knocks when spinning


you either have a broken shock or the spider gear is gone,take off the bottom panel and check out the shocks,if it's the spider gear it's time for new washer,it's around 500 bucks for new gear,to much detergent used over the years eats at the metal

Jan 23, 2010 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Washer is knocking in front left when is starts spin cycle. The unit used to stop and re-align but not longer does. The knocking gets louder at slow speed and somewhat improves at a faster speed. What...


The unit is self aligned when all the load springs connecting from the tube to the bottom chassis are intact. When one of them some how gets out of its position or broken, it causes the tube imbalance so it knocks during the spinning. There are about 8 springs distributed evenly from front, sides, and the rear. Need to check these out.

Jan 03, 2010 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Duet GHW9150W0 Washer - Stainless Steel Washer Bin Arms Broken


I HAD THE SAME PROBLEM. I CALLED THE 800 NUMBER AND HAD WHIRLPOOL SEND ME ALL OF THE PARTS THAT WERE STILL UNDER THE EXTENDED WARRANTY THAT I PURCHASED. WHIRLPOOL SENT ME EVERY PART, INCLUDING THE STAINLESS TUB, THAT WAS STILL UNDER WARRANTY. I NOW HAVE REPLACED ALL INTERNAL PARTS EXCLUDING THE MOTOR.

Jun 07, 2009 | Whirlpool GHW9150 Duet Washer

1 Answer

Knocking while spinning


something is loose or broke you need to remove the bottom panel and top panel and see what is hitting may be a strut

Nov 29, 2008 | Whirlpool Washing Machines

1 Answer

Whirlpool Duet GHW9150P knocks when spinning


I had that problem while the washer was under warranty. Luckily my neighbor is a repair man. He removed the front cover just under the door. There are shocks under the barrel that keep it aligned. One of mine was damaged and the barrel became misaligned. Check that area, that might be your problem. Good Luck!

Nov 06, 2008 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Drum spinning during wash cycle


if when in the wash cycle the tub spins then the brake in the cluch assembly is worn and to be replaced. this holds the tub from moving when in the wash cycle. thanks tallpaul

Apr 14, 2008 | GE WBSR3140DW Top Load Washer

2 Answers

WHIRLPOOL DUET GHW9100 FRONT LOAD


Take the top off the unit,and check the springs..there are 4 on top and 4 on the bottom..make sure they a attached..and tighten

Jan 10, 2008 | Whirlpool Duet GHW9150P Front Load Washer

4 Answers

Whirlpool Duet HT WFW9200SQ/A


Plug off the wall. Close the wall faucet and check the hose & small screens on it. Open the faucet to see if the flow and pressure is good (keep bucket handy). Refit carefully, try machine. Code is nt seen anywhere as you said.

Jan 08, 2008 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Loud Noise during spin cycle


drum bearings are gone,it would cost too much to repair,the drum shaft would to be repalced as well.Sorry

Dec 15, 2007 | Whirlpool Duet GHW9150P Front Load Washer

Not finding what you are looking for?
Whirlpool GHW9200L Front Load Washer Logo

342 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Sal DeAngelo

Level 3 Expert

2290 Answers

yadayada
yadayada

Level 3 Expert

76682 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...