Question about Simmons Mattress Matino - Natural Maple Crib

2 Answers

I need instructions for a Simmons Crib Model No. 1322 91 239. We are missing the foot release for the drop down side and need to see what parts to order.

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 239 Answers

The Assembly instructions for hte 1322 crib show it is part #8, but I see the stabilizing bar as permanently attached to the catch lever which is #7. The gate shoes (part that actually latches), is part #12... there are two of these which clip into the catch lever (#8) when the side is elevated. You need to provide the model and the parts that you need. Here is contact information from the web page http://www.simmonskids.com/consumer_service.cfm:

Consumer Service I need instructions for a Simmons Crib Model No. 1 - clear.gif
Send us your comments and questions. We'd love to hear from you!
Baby Mattresses

Crib Furniture
Order Replacement Crib Furniture Parts
  1. Find your Model Number
    • Cribs - model number is found on a blue and white warning label on the inside bottom of the head board.
    • Dressers - model number is the six digit number stamped on the back in the middle section.
  2. Contact our Parts Department
    • E-mail: Parts
    • Phone: 800-218-2741
  3. Payment
    • We accept personal check, money order, Visa or MasterCard
    • You will be charged for shipping and handling costs. Minimum billing is $8.00.
Parts can not be returned for a refund.

We can not provide parts for cribs that do not comply with federal safety standards.
Hope that helps..

Posted on Nov 24, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 340 Answers

You can call Products America at 800-205-9642 or 800-772-1041. They offer a wide verity of hardware for many cribs.

Posted on Nov 18, 2009

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 5 Answers

SOURCE: simmons baby crib

Have you tried the website: http://www.simmonskids.com/consumer_service.cfm

Posted on Jul 30, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am looking for the instructional manual for the Simmons crib model #239180


You can contact http://www.simmonskids.com/consumer_service.cfm for a copy you will also need to replace the drop down sides if you have not already as these are recalled

Aug 14, 2010 | Simmons Mattress Crib 'n More

1 Answer

I have a simmons crib that is ten years old and has a drop down side and plastic hardware. It has been a great crib. With the recent recall what options are there? Are there replacement parts available?


I have a similar crib. It's old, but it is in great shape, and we've had no problems. We don't even use the drop side because we're both tall. I emailed Simmons at CustomerService@sjfdec.com. They sent the following response:
>>
Hello,

I am sorry; with the recent announcement by the CPSC your crib would longer meet the safety standards. We are unable to supply the parts or instructions to any crib over 10 years old effective 6/24/2010. Your crib model was manufactured in 1995. We will not have a fix or replacement parts for this crib.

In keeping with industry and regulatory safety standards – cribs manufactured before 2001 will not be furnished with the Immobilizer Retrofit kit.

Cribs older than 10 years old have surpassed their lifespan. The reason for this safety standard is to ensure the quality of the crib has not been compromised, the wood may have possible degradation or the crib could have possible or broken parts and no longer meets the current government safety standards.

If your crib was manufactured before 2001 – please discard the crib and do not use or try to repair it yourself.

If you have any questions on the recall or safety standards you can go to www.cpsc.gov.


Thank you,

Laura Dietz
Customer Service Representitive
Simmons Juvenile Furniture
A Division of Delta Enterprise

800-218-2741 x 202
>>

Dec 11, 2009 | Simmons Mattress Baby Gear

1 Answer

Simmons crib


You can email them - they emailed me the instructions and parts list in a 16 page pdf.
customerservice@sjfdec.com


Here are the instructions for your crib. Please review them and see which parts you will need. We accept Visa or Master Card. Parts are non returnable. Delivery is normally 7-10 business days. We do have replacement parts for this crib. Please review the instructions and see what you will need. J Thank you, Cindy Customer Service Rep Simmons Juvenile Furniture ':Phone: 1-800-218-2741 ':Phone: 1-920-779-4004 7:Fax: 1-920-779-4216

May 30, 2009 | Pali Katie Crib

1 Answer

Drop down gate bottom brackets broken


You can email them - they emailed me the instructions and parts list in a 16 page pdf.
customerservice@sjfdec.com


Here are the instructions for your crib. Please review them and see which parts you will need. We accept Visa or Master Card. Parts are non returnable. Delivery is normally 7-10 business days. We do have replacement parts for this crib. Please review the instructions and see what you will need. J Thank you, Cindy Customer Service Rep Simmons Juvenile Furniture ':Phone: 1-800-218-2741 ':Phone: 1-920-779-4004 7:Fax: 1-920-779-4216

May 23, 2009 | Simmons Mattress Crib 'n More

1 Answer

No directions to assemble a Simmons crib model 2746 76 219


Most of the cribs that you buy have directions on the bottom of the mattress board on how to assemble. They might not be word for word, but its pretty informative. Hey, it does have pictures! LOL

Apr 01, 2009 | Simmons Mattress Baby Gear

2 Answers

Instructions for Jenny Lind Baby Bed purchased in 1981


dear debbie... yesterday i was given the complete jenny linn nursery. i have all the parts and hardware. where were you able to find the assembly instructions? can you help?

thank you...laura

Jan 18, 2009 | Evenflo Jenny Lind Crib

1 Answer

Set up for simmons crib


on this post on fixya some posted the same and a telephone number to contact may be worth a try
Simmons crib parts list - FixYa


riz.

Mar 25, 2008 | Simmons Mattress Crib 'n More

1 Answer

Missing parts


E-mail Simmons customer service with the model number (located on the bottom of the crib) and they will send you the parts #s and how to order spare parts. customerservice@sjfdec.com

Feb 10, 2008 | Simmons Mattress EasySide Crib

Not finding what you are looking for?
Simmons Mattress Matino - Natural Maple Crib Logo

569 people viewed this question

Ask a Question

Usually answered in minutes!

Top Simmons Mattress Baby Gear Experts

Stan Skaggs
Stan Skaggs

Level 2 Expert

239 Answers

Glen Weitzdoerfer

Level 2 Expert

101 Answers

Tom Chichester

Level 3 Expert

33294 Answers

Are you a Simmons Mattress Baby Gear Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...