Question about Whirlpool RBS275PD Electric Single Oven

1 Answer

I have had my whirpool accubake for 10 years with no problems. Yesterday the cleaning folks came and after they surfaced cleaned the range I noticed an E0/E1 with a f5 code. Can anyone tell me what this is and how to get rid of it??? thanks

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

The E1- F5 error is a door lock error.

The control (TIMER) has likely failed in this instance - BUT...

Sometimes when you disconnect power to a range and reconnect it the electronic range control gets confused.
You should disconnect power again for 15 seconds and reconnect and see if that helps.

If it doesn't cure the E1- F5 error hold the bake button in until E0- F2 appears in the display.
This is the error for a stuck button on the keypad and is the way to clear the memory of the electronic range control.

Sometimes these work, but if the control has failed it won't make any difference.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.(*UIHJ

Posted on Oct 01, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

SELF CLEANING INSTRUCTIONS FOR WHIRLPOOL SUPER CAPACITY 465 ACCUBAKE


It's best to remove the racks. However you can go on line to download a free manual.

Dec 31, 2014 | Whirlpool 30" Self-Cleaning Freestanding...

1 Answer

Whirlpool oven keeps heading up


What is the model number of your unit?

Jun 26, 2013 | Ovens

1 Answer

I self-cleaned our oven yesterday. After waiting


in order to get the door open you can remove the door locking motor and turn the locking shaft.
there could be a problem with the excessive heat from the oven during the cleaning cycle check with frigidaire and see if there is any kind of recall for this problem

Apr 06, 2010 | Frigidaire 30" Self-Cleaning Freestanding...

1 Answer

Whirlpool Accubake RBD306PDB - Fans won't stop + codes F2 E1


yes. E1 -F2- = the keytail (connector ribbon) that plugs into the control board is not making good contact. first unplug your range and then remove the two screws on the underside of the back-splash controls panel to access the back of the control board. now simply cut a slip of heavy paper such as a business card to the width of the ribbon and slide it into the slot along with the ribbon connector. that will help press the contacts on the other side together snuggly. screw the back-splash back in place, plug in your range, and the problem will vanish. if the error ever returns, try pulling out the connector, cleaning the contacts with a pencil eraser, reinserting it into the slot and repeat above with the paper. good luck.

Jan 21, 2010 | Ovens

1 Answer

We've a Whirlpool Gold Accubake System (electric). Yesterday, the oven was working fine, we did a cleaning and today when we went to use it and it would not heat up. Is there a way to determine if the...


its not uncommon to have this happen. it may have overheated . causing the hi limit on the back of oven to fail, that is what you need to ck . and repl if you find it to be bad. **** .. if your want to ck the element then when the back is off range . you can ck the two elem with a ohm meter . . ****

Dec 25, 2009 | Ovens

1 Answer

I used the self cleaning for the top oven of my double whirpool Accubake ovens today. It worked fine during the process. But now, after it has cooled down. The panel is not lit up with the clock etc. and I...


There is a non-resettable fuse on the back of the oven that will have to be replaced. The oven will have to be removed from the wall and the back panel removed from the oven to access the fuse.

Nov 22, 2009 | Whirlpool RBD305PD Electric Double Oven

1 Answer

Whirlpool Accubake instructions


I have lost my instruction manual and I need to know how to use the self-cleaning feature on my range

Oct 03, 2009 | Ovens

1 Answer

Whirlpool accubake rbd245pdb no power to control


Make sure there's power getting to your range, oven or cooktop. Check for a tripped circuit breaker or a blown fuse. Check the wall socket for power with a voltmeter or by plugging something else in.

If all check out ok with all the above, replace the ERC

Jun 19, 2009 | Whirlpool 30" Self-Cleaning Freestanding...

1 Answer

Broiler element Whirpool Accubake electric oven not working


Hello
Welcome to Fixya
My name is Huum,

You need a new top element

http://www.pcappliancerepair.com/model-display.php

You can find the diagrams,schematics, and parts for your range at this site

Please remember to leave a rating before you leave

Dec 11, 2008 | Whirlpool RBS275PD Electric Single Oven

Not finding what you are looking for?
Whirlpool RBS275PD Electric Single Oven Logo

204 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Ovens Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

 Fix Your Board
Fix Your Board

Level 3 Expert

310 Answers

ashburton

Level 3 Expert

417 Answers

Are you a Whirlpool Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...