Question about Dishwashers

1 Answer

GE Dishwasher is not draining water

GE Dishwasher Model GSD6610K01BB is not draining water. Does go through the full wash cycles -- please help

Posted by on

1 Answer

Re: GE Dishwasher is not draining water

GE Prifile dishwashers have a valve called a "Piston" and an "O" -Ring under the screen that become degraded over time. The part is around $10 and it takes about an hour to do the repair. You can do this yourself if you are handy and have some simple tools. You can go to the GE website and get a free owners manual.

Posted on Aug 01, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

9-14-14 How do I increase dishwasher pump drain pressure?

Wow, you've really tried hard to fix this problem (and describe what you've tried to do to fix it). But for me to be able to fix it, I need to know the model number, and approximately how old the dishwasher is. Does this model use a separate drain motor, or does it have just one motor and a diverter powered by a solenoid to drain the water?

Sep 14, 2014 | GE Dishwashers

1 Answer

GSD4020Z07BB won't drain. replaced pump and piston nut

When you replaced the pump I am assuming you replaced the whole assembly that pumps water for the wash and drain. See item 310 in this diagram.

If the dishwasher goes through the wash cycle then it was unlikely the thing that was faulty. The pump is shared by both the wash and drain cycle. It is likely the impeller (item 429) is not getting the pulse to change direction so that it draws water from the drain sump to the drain hose rather then to the wash arms as it does in wash cycle. The solenoid connection might be faulty or the controller output is not there.

Apr 21, 2014 | GE 24 in. GSD4020Z Built-in Dishwasher

1 Answer

Water wont pump out at end of cycle

it would be helpful to have the full model number of the dishwasher.

do you get any lights flashing? how do you know it is end of cycle? could be still in wash and not got to rinse at all. Do you hear the drain motor running?

Try with a shorter cycle like simple rinse only and see if it drains the water.

I am assuming you have checked the filters are clean and there is no blockage in the kitchen drain.

Jan 10, 2011 | GE Dishwashers

1 Answer

The dishweasher will not drain.

Most likely the filter plate and sump is clogged.
Have you tried cleaning it up. If you cannot hear the pump running during the drain cycle, then it is likely the pump is blocked or the motor is faulty. I am assuming the dishwasher completes the wash cycle - i.e., it takes in water and the arms move, the water gets heated, etc.

please provide full model no. of the dishwasher

Aug 11, 2010 | GE Dishwashers

1 Answer

My dishwasher does not completely drain. It leaves about 3 inches of standing water. What could be causing this?

Without knowing the model of this GE ? dishwasher, it is very hard to be specific. Most DWs have a float/switch that sense when the dishwasher is filled and empty of water. They can fail.
If you can run a cycle without the dishwasher over flowing but it simply does not fully drain, I would pull the lower spray arm and the filter beneath that arm. Look closely for debris that could be blocking the pump. SOme dishwashers simply have a timer that controls each phase of the wash, including the drain cycle. If something is blocking the drain pump, an obstruction could cause this problem.
Good Luck, Please report back with what you find.

Apr 05, 2009 | GE Dishwashers

1 Answer

Dishwasher will not drain (water just trickes out) fill is good

Drain valve not opening or pump impeller loose on shaft - is it washing ok?

My guess would be drain valve not opening. It is a 110v solenoid and they get stuck or burn up. New solenoid costs ~$20.00

Mar 26, 2009 | GE 25 in. Nautilus GSC3400J Free-standing...

1 Answer

GE Triton Dishwasher fills with water but no spraying occurs.

Trouble shooting GE dishwasher
Model GSD6600G00WW

Air gap is clean
Garbage disposal is clean
Dishwasher fills with water OK
Drain pump runs after a wait of several minutes and seems to run slow but drains most of the water out of the reservoir.
Dishwasher is not running the wash cycle (spraying water on dishes)

Jan 27, 2009 | GE 24 in. GSD6660GSS Built-in Dishwasher

3 Answers

GE Nautilus Drain Problem

I had the same problem (water remaining in the bottom) after the rinse cycle. FYI my GE Nautilus is 7-years old.
(1) I disconnected the drain tube at the garbage disposal unit (in the sink) and, using a wire coat hangar freed a 'plug' of sludge located at the spot where the drain tube clamps onto the garbage disposal. I blew into the drainage tube to further clear other 'plugs' I observed but could not reach w/the coat hangar.
(2) I unscrewed the Filter/Strainer on the inside (bottom) of the dishwasher; and further removed the inner filter; cleaned both out.
(3) Re-ran the dishwasher thru complete wash/rinse cycles (to check for leaks. There were none.
Finally, upon completion of the w/r cycles there will always be a small pool of water (residing in the filter area). However my dishes are clean and (after 7-years) checking the drain tube and filters was a breeze.
Hope this helps

Jul 04, 2008 | GE Nautilus 24" Built-in Dishwasher

1 Answer

GE Nautilus won't drain after Rinse Cycle

Check disposer plug. If a garbage disposer has been recently installed, it is possible the disposer drain plug was not removed. The drain plug is a plastic piece in the disposer that blocks the hole where the dishwasher hose connects. Also check the hose connected to the disposal. Mine apparently had a kink in it. When I straightened the hose the dishwasher drained at full speed (I recently had a plumber re-route a hot waterline. He must has bent the hose). Hope this helps. If not go to the GE website. That's where I found my answer.

Nov 03, 2007 | GE 25 in. Nautilus GSC3400J Free-standing...

2 Answers

Dishwasher doesn't drain

Greg, if the model number ends in GO1, your dishwasher has a piston nut assy. thats problably giving you the grief. If this assy. goes bad you will have water left in the tub at the end of the wash. A common GE problem. It's located under the filter screen in the back and just unscrews out. Part number is wd24x199. It's an easy fix. Look up the part on the net to get an idea of what it looks like. back.

Jan 25, 2007 | GE 24 in. GSD1000G Built-in Dishwasher

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

2,749 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers


Level 3 Expert

4342 Answers

Are you a Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides