Question about Avaya Merlin Magix Handset 3810 TransTalk Phone

2 Answers

3810 wireless phone. 'Acquiring Link' message

I have a brand new 3810 wireless phone. It's charged and plugged in. When you try to dial, it flashes 'acquiring link' and nothing happens. What could be causing this? I've matched the id on the base and phone. Both have power. I've confirmed that the phone line is plugged in.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Probably the SN on the handset and base module dont match if that is the case call Drew Telecom at (269) 685-5400 ask for Andy to get a quote to match the handset to the base. We handle these issues all the time and can reprogram the IC on the handset and base to match up again.

Posted on Sep 02, 2015

If it is brancd new, talk to the distributor. THEy will be able to get a replacement. If bought on ebay or off the internet, you will now find why that is a pain in the buttocks.

Posted on Nov 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Telstra 7100a home phone


Hi, It sounds like the batteries of the handset could be the problem.
Try replacing the batteries with other new batteries. I recently purchased a good brand of battery (not rechargeable), but they were down in their voltage straight out of the package.
Make sure the batteries are AAA NiMH batteries, and that they are charged for at least 16 hours.
Also check that you have inserted them the correct way +ve/-ve.
When you have inserted them, place the phone on the base and the handset should show you it is charging.

Jan 29, 2014 | Lands Phones

1 Answer

I have 2 problems. 1. The orange message light will not stop flashing no matter what I do. 2. Some how the system was switched from touch tone to dial tone. I can't seem to that switched either.


Resetting the voice message waiting indicator
When you receive a new voice mail message, the new message LED on the top of the handset flashes. In the event your message waiting light gets out of sync with your phone company's
voice messaging system, you can manually reset it back to the "No messages waiting" state.
1. Press and hold FiND on the base for five seconds.
Note: The handsets connected to the base will start to beep, however, keep pressing for five seconds.
2. A beep sounds and the message alert tone is reset.
Changing the dial mode
Your phone can communicate with the telephone network in two different ways: tone dialing or pulse dialing. These days, most base networks use a method called tone dialing, so your phone comes programmed for tone dialing. If your phone company uses pulse dialing, you will need to change your phone's dial mode. If you don't get a dial tone or can't connect to the telephone network, please follow the steps below to modify your phone's settings:
1. Press MENU/SELECT.
2. Select the Global Setup menu, and then the Dial Mode submenu.
3. Scroll to highlight Pulse.
4. Press MENU/SELECT. You will hear a confirmation tone.
If you ever need to change the dial mode back to tone dialing, follow the same procedure, but select Tone in step 3.

Finally for future ease of use, here is a link to the user manual were I copied the above information from:

http://www.uniden.com/content/ebiz/uniden/resources/ownersmanuals/DECT1580-3om.pdf

Jul 21, 2011 | Uniden DECT 6.0 Cordless Phone ID

3 Answers

I can't find a user manual for my Sanyo Mirro cell phone.


Sanyo SCP-3810 or the Sanyo Mirro cell can be found here. http://www.kyocera-wireless.com/sanyo/usa/scp-3810-phone/pdf/Sprint_SCP-3810_User_Guide_en.pdf

Mar 02, 2011 | Sanyo Cell Phones

1 Answer

We now have a avaya 3810 wireless phone. i cant seem to get it into operation. when i press talk button it says aquiring link then turns off. the manual is not very helpful in the setup process.


Plug the antennae in. With it plugged in, stand next to it and turn teh cordless on. If it never "aquires link" then there is a problem with it, send it in for repair.

Feb 02, 2011 | Avaya Merlin Magix Handset 3810 TransTalk...

1 Answer

Won't link with base New old stock unit flashes "Acquiring Link" message and nothing else.


It will need to be repaired. You willl have to send it in. I can recommend someone if you need.

Feb 19, 2010 | Avaya Partner 3910 TransTalk Cordless...

4 Answers

The indicator light on my Domo2 flashes


Try this link Page 14 and 15 on Domo2 Guide
http://sumgen.com/

Nov 04, 2009 | Lands Phones

2 Answers

My NEW Blackberry 8310 won't charge! Red light flashes just once.


get a message saying my USB is not sufficient enough to charge phone ???? It works on other computers just not the one I need it to work on.

May 09, 2009 | AT&T BlackBerry Curve 8310 Cell Phone -...

1 Answer

I am getting the message "acquiring link" on my avaya satellite wireless phone. no dial tone, no buttons work. what does that mean, and how do I know when I just need a new battery?


You are too far from the base. Make sure its withing 100 feet. If you are within 100 feet please contact your Avata Business Partner and request replacement.

Nov 30, 2008 | AT&T Lucent MLS-12D Phone

1 Answer

Avaya satellite phone not working


You are too far from the base. Make sure its withing 100 feet. If you are within 100 feet please contact your Avata Business Partner and request replacement.

Nov 30, 2008 | AT&T Lucent MLS-12D Phone

1 Answer

I have a flash and display that indicates I have a voice mail, yet when I dial in to voice mail, I receive a recording that I DON'T have a voice mail. The phone continually flashes, and is driving me...


Could you please post the type of phone system or the type of phone you are using and I'll try to help. When you have a message light but the voicemail says you have no messages it usually means someone in the office set the lamp, not the voicemail system.

Jul 30, 2008 | Lands Phones

Not finding what you are looking for?
Avaya Merlin Magix Handset 3810 TransTalk Phone Logo

Related Topics:

694 people viewed this question

Ask a Question

Usually answered in minutes!

Top Avaya Lands Phones Experts

george  peters
george peters

Level 3 Expert

860 Answers

kakima

Level 3 Expert

102366 Answers

Shehu Pro
Shehu Pro

Level 3 Expert

1284 Answers

Are you an Avaya Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...