Screen display 290 jam remove original - Lexmark X342n All-In-One Laser Printer

With commercial machine like the ImageRunner, it is often staff roughly removing the jammed paper and leaving a tiny piece of torn paper over one of the sensors.

Remove the wall mains plug. Remove all the paper trays. remove the toner cartridge, open all the side doors and look carefully with a flashlight for a small piece of paper.

List of Error Messages - imageRUNNER ADVANCE 400iF 500iF

https://oip.manual.canon > ... > Problem Solving
Error messages are categorized by function. Select the function that corresponds to the displayed error message, and see the possible causes and remedies.

• 
  

  Clearing Paper Jams - imageRUNNER ADVANCE 400iF 500iF

  https://oip.manual.canon > ... > Problem Solving
  Follow the instructions on the screen to clear the paper jam. The screen is displayed repeatedly until the paper jam is cleared. If you press [Close], you can ...

go google and type in-- reair manual for hp 290 color copier- there are many sites offering pdf version downloads for may copier including the 290
It is difficult to advise 3rd hand but the sensor that is activated by a paper jam may have a small piece of paper stuck against it and it is still reading it as a jam
Can it be taken to a repair shop ( most office equipment retailers have a service technician on hand ) to be checked out

Hi

Check all the paper movement from the tray, left or right cover, front cover, if so then remove jammed paper. Otherwise the paper sensor spring guide missing or fell off from its original position. Check carefully where the sensor locate. paper sensors detect all the paper movement in the machine during copying or printing, so locate the place in the machine which the paper usually jammed, see the screen of the machine, it will locate the place where the paper jammed mostly. Sensor not return to it original position that is why ( remove paper jam keeps blinking)

Go to a technician who repairs mobile. Or You'll end up losing your mobile.

THIS MACHINE HAS ONE SENSOR. REMOVE THE BACK COVER AND CHECK. IF ITS NOT THERE FIT IT BACK WELL

if the initial display BIOS dont open with specifications of pc and after a minuts pc turn off ???
maybe proccesor is burn please consult technicals for check your hardware.

techbelkin

This is a hardware issue. Maybe the sensor, the pick arm or the pick roller itself that's causing the problem. Here's an article on Repeated '290' Paper Jam Messages Occur When Using the Automatic Document Feed (ADF) on a Lexmark X64x Series Printer. Just click on this link: http://bit.ly/clBsWr. If this doesn't help, I strongly suggest you contact Lexmark Technical Support to further investigate the problem. Thanks.

Its probably the driver, you'll have to go to the acer website follow links for support and downloads. Download and install the latest driver for your wirelsss modem.

I have the exact same problem with my old computer! The problem started after I switched the HDD a long time ago but I never got it (semi-)working again until a few days ago.I completely disassembled the computer and reassembled it again and I finally got something on the screen. I the tried to install win xp but when I pressed the keyboard the problem reoccurred. Therefore I'm fairly sure there is a short circuit or a bad connection somewhere probably on the underside of the motherboard close to the power supply DC-connector.

Remove original from auto document feeder... it thinks that there is a paper jam... check into that.