Question about Sanyo DC-DA1000 CD Shelf System

Open Question

How can I set clock for Sanyo AWM1900U stereo. I have no remote

Posted by on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: HOw do you set the clock on an RCA RP9328A stereo without remote?

I have this system. According to the manual you have to do the following. 1. Press and hold the TIMER/CLOCK button until CLOCK appears in the display under the time. 2. Press the SET button once and the hour will flash. 3. Use the << or >> buttons to ascend or descend to the correct hour. 4. Press the SET button again and the minutes will flash. 5. Use the << or >> buttons to ascend or descend tot he correct minutes. The time will flash for a few seconds and be set when it stops. I have tried those steps and you may have to do them a few times in order to get the time right. It's a little tricky. I haven't bothered to reset the time as I have other devices that display the time without the back and forth with this device. It's a nice system and the sound is okay for my purposes. Hope this helps.

Posted on Jun 28, 2011

  • 1 Answer

SOURCE: clock set instructions for Sanyo stereo awm2800U

you need the remote to change the clock press timer am 1200 blinks press timer again for at least 2 seconds the hour blinks press tuning/time set plus or minus press clock adjust the minute will blink press time set to adjust minutes then clock adjust there you go...

Posted on Jan 06, 2010

  • 1 Answer

SOURCE: How to set the clock on a Sanyo DC-DA1100 stereo?

This is taken from the user manual.
If switched on, press the ON button to turn the unit off.
Press the CLOCK/TIMER button for at least 2 seconds so that the clock icon blinks on the display.
Press the MEMORY button. The hours display blinks.
Turn the VOULUME control to set the hours.
Press the MEMORY button. The minutes display blinks.
Turn the VOULUME control to set the minutes.
Press the MEMORY button. The clock starts.
NOTE: the time can be set accurately by pressing the MEMORY button when a time signal is heard.

Changing the clock to 12 hour display.
If switched on, press the ON button to turn the unit off.
When the clock is display, press the MEMORY button and hold it, then press TUN UP buttom (this will change from 24hr format to AM/PM format)

Posted on Apr 24, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have an old sanyo analog vcr and I need to set the time and date


You will need the remote for that. Select the main menu, then look around for time setting option. You will probably have to use either the arrow keys or numbers on the keypad of the remote to set the date. Some models will have an OK button to set the date/time on each part. If you see an auto setting for the clock time, set it to off, as broadcasters no longer set a time out for analogue models.

Oct 05, 2016 | Sanyo Televison & Video

1 Answer

Got a Panasonic CD stereo system SA-AK410 When I turn it off after a few seconds it turns back on. Is this normal?


That's because you haven't set the clock on the system. I jumps to DEMO mode once you turn it off without the clock set. Clock can be set through your remote. Hope this helps. Cheers.

Oct 04, 2013 | Panasonic Remote Control Eur7710020...

1 Answer

How do I set the time


  • Use the actual stereo to set the clock, not the remote.
  1. Turn off the stereo.
  2. Press "clock/timer" for at least 2 seconds.
  3. Press "memory" to make the hours blink.
  4. Turn the volume knob to adjust the hours.
  5. Press "memory" to make the minutes blink.
  6. Turn the volume knob to adjust the minutes.
  7. Press memory.
  8. Now the clock setting is complete.
Regards, Tony

May 21, 2011 | Sanyo AWM-660 CD Shelf System

1 Answer

I have a Sanyo AWM-2400U stero and need the user manual and remote for this. Can you help?


I actually have this same stereo and with out the remote, you can not program the clock or anything else for that matter... How ever, if you have the remote I can tell you how to use it...

kind of like an e-mail manual... haha

However, one minor detail, my remote face has been eaten off by my dog, so if you could send me a pic of the remote face it would be MUCH easier to explain...

jaysin_19@hotmail.com

Sep 28, 2010 | Audio Players & Recorders

1 Answer

Have SANYO VCR/DVD Model E175216 and can't locate timer button for late night programming


Hi, if ithere is no button on the front of the unit or on the remote, then simply setting the unit to standby with either power button should make the unit enter the timer record mode. (This will be indicated with TIMER or a small red clock symbol in the display providing all the conditions have ben met. i..e clock & timer correctly set, tape in machine, etc)

Mar 16, 2010 | Sanyo DVW-5000 DVD Player/VCR

2 Answers

Codes


Hi, Take a look at this link, I hope it helps you, if not let me know.
http://www.remotecodelist.com/remotes/

Regards - Anthony

Feb 08, 2010 | Emerson Televison & Video

1 Answer

How to set the clock on a Sanyo DC-DA1100 stereo?


This is taken from the user manual.
If switched on, press the ON button to turn the unit off.
Press the CLOCK/TIMER button for at least 2 seconds so that the clock icon blinks on the display.
Press the MEMORY button. The hours display blinks.
Turn the VOULUME control to set the hours.
Press the MEMORY button. The minutes display blinks.
Turn the VOULUME control to set the minutes.
Press the MEMORY button. The clock starts.
NOTE: the time can be set accurately by pressing the MEMORY button when a time signal is heard.

Changing the clock to 12 hour display.
If switched on, press the ON button to turn the unit off.
When the clock is display, press the MEMORY button and hold it, then press TUN UP buttom (this will change from 24hr format to AM/PM format)

Nov 02, 2009 | Sanyo DC-DA1000 CD Shelf System

1 Answer

Clock set instructions for Sanyo stereo awm2800U


you need the remote to change the clock press timer am 1200 blinks press timer again for at least 2 seconds the hour blinks press tuning/time set plus or minus press clock adjust the minute will blink press time set to adjust minutes then clock adjust there you go...

Mar 10, 2009 | Sanyo AWM-2800 CD Shelf System

3 Answers

Sanyo mts stereo tv purchase in 1998


Must have original remote with Sanyo. Go online for search to Sanyo customer support

Dec 24, 2007 | Sanyo DS32920 32" TV

1 Answer

Sanyo 25" tv


blue clock set screen. is seen due to no signal as due to Accidently hit remote might have got defective or setting must have disturbed. refer owner's manual which you must have received during buying set. good luck

Sep 23, 2007 | Sanyo AVM-3659S 36" TV

Not finding what you are looking for?
Sanyo DC-DA1000 CD Shelf System Logo

Related Topics:

258 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sanyo Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5011 Answers

kakima

Level 3 Expert

102366 Answers

The Knight
The Knight

Level 3 Expert

73611 Answers

Are you a Sanyo Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...