Question about Bosch 24 in. SHU66C02 / SHU66C06 Built-in Dishwasher

3 Answers

Machine cycle stuck on drain

I'm not sure of the model number. This is a basic Bosch dishwasher that I bought about 3 or 4 years ago. Twice the wash cycle has gotten stuck on drain, and will not progress through the cycle. We had it fixed last year and a few days ago it happened again. The first time, we thought it might be due to plumbing problems, but those have been fixed. We are careful to use the right amount and type of soap. We don't know what happened this time, and are considering giving up on this machine.

Posted by on

  • Doodan Jan 08, 2008

    Woody39 - Thanks for your post. There is a little water in the drain (below the cylindrical filter, after I removed it), but no other water.

  • j_wlk_r Feb 01, 2008

    we had a power outage and the dishwasher will drain the water but will not go any further. it seems to be on a continuous run. i tried the cancel drain that did not work i even went as far as shutting the power down at the circuit box for 45min (pr bosch help line) and that did not work. please any suggestion would be most greatful. trying to find a repair person dealing with Bosch d.w. is a hard task j_wlk_r@yahoo.com

×

Ad

3 Answers

I had this problem with mine. I had a service guy come out and he took the main board out and soddered a paper clip to it and said I wouldn't have the problem agian, he said the resister or transistor or some thing like that was to week, and that this should fix it. It did for about a year. so I took it apart the next time and soddered the same spot and it work for about 3 months, after that I finally broke down and bough a new board $140 buck from appliancepartspros.com and it worked great. I now have a drainning problem. me and this bosch have a love hate relationship. when it works I love it, when it doesn't....

Posted on Feb 13, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

We have the same problem the machine runs on drain cycle only and thats all. i tried everything i did the cancel cycle but that did not work or help, i shut the pwer off at the fuse box for 45 min (per a Bosch represenative) and that did not help. i called around to various repair places and they want to charge a fortune to come look at this. Is this a problem worth fixing or should i move on to a different machine. j_wlk_r

Posted on Feb 01, 2008

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 90 Answers

Check to see if there is water in the bottom by the water valve and pump.

Posted on Jan 08, 2008

  • Douglas Woods Jan 08, 2008

    you will need to take front off door and bottom panel in oreder to see what I'm talking about. Bottom tray under tub.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i operate a basic bosch dishwasher


On many Bosch dishwshers (especially those with the controls on top), they expect your to press the appropriate cycle and option(s) buttons, and then press the Start key, ALL WITH THE DOOR OPEN. Immediately after pressing the START button, close the door (within 3 seconds), and the dishwasher should start.

On other Bosch dishwashers, if you open the door, the poser button is automatically turned off. On those models, you must close the door, turn the Power button ON, and THEN press the appropriate cycle & options buttons. If your dishwasher has a START button, then press it; otherwise just wait 10 second with the door closed.

See? There is no such thing as a "basic bosch dishwasher". Next time, if you have a question, please provide the model number of your dishwasher (or other appliance).

Mar 20, 2015 | Bosch Dishwashers

1 Answer

My Bosch dishwasher is driving me crazy! When it finishes a wash cycle it beeps twice every 10 minutes until the door is opened. We can't run the dishwasher at night after dinner unless we're SURE we...


Hello there,

It would help to know the model number of the dishwasher, but on many Bosch dishwashers, you can switch the cycle cycle completion signal off as follows:

1. While holding the right-hand CANCEL/DRAIN button, also press and hold the ON/OFF button
2. When the LED above the CANCEL/DRAIN button illuminates and the beeping starts, release both buttons
3. Press the right CANCEL/DRAIN button repeatedly until the beeping tone is at the desired volume, i.e. silent!
4. Press the "ON/OFF" button again to set the volume.

On models with the wash cycle buttons on the top edge of the door, the CANCEL/DRAIN buttons aren't always explicitly labelled CANCEL/DRAIN. These buttons are also labelled RESET on some models.

On models with 3 and 4 wash cycle buttons, the right CANCEL/DRAIN button is the third button when reading from left to right. On models with 5 wash cycle buttons, the right CANCEL/DRAIN button is the fourth button when reading from left to right.

Please try the above then let me know if you need further assistance. Please state the model number or series (i.e. Integra) of your washer if/when replying.

Hope this helps.

Regards,
BElectric

Mar 16, 2011 | Bosch Dishwashers

1 Answer

When I press the start button, Bosch dishwasher (model SHY56A 05UC) just keep running the motor pumping the water out of dishwasher, irrespective of: 1) the wash cycle it is on, 2) whether the door is...


what is happenig i believe and has happened to me 2 times is that the water level float that is on the left side of dishwasher is stuck.

Either remove side panel and flick lever or pull dishwasher out and tap lower portion of panel and this will cause the level to move and then see hat happens

Nov 26, 2010 | Bosch SHY56A02 / SHY56A06 Built-in...

1 Answer

The cycle timer gets stuck


The timer probably will have to be replaced.

Oct 29, 2017 | Kenmore 24 in. 15149 Built-in Dishwasher

1 Answer

Our Bosch Dishwasher Not Draining After Normal Washing Cycle


make sure the filter is not blocked by anything like a straw or just junk

Apr 02, 2009 | Bosch Dishwashers

2 Answers

Our bosch diswasher on auto wash will stop functioning in middle of the cycle start beeping and there is an icon of a faucet on the display. What does this mean?


Hello zeviemail
Welcome

You said, your Bosch dishwasher on auto wash will stop functioning in middle of the cycle start beeping and there is an icon of a faucet on the display.


What is your model number and the year of the dishwasher?

Oct 04, 2008 | Bosch Dishwashers

1 Answer

Dishwasher was leaking; now gets "stuck" 3 minutes after starting


You're describing a number of issues related to old age and maintenance. First, you've likely got a mechanical timer that is getting stuck. If the price of replacement is outside your budget for an old warhorse....

Second, in come cases, the timer takes care of water level...in most, however, there is a float or aeneroid level sensor. If it is a float...it may be clogged/jammed with detergent or debris. Located in the wash tub near the front. Clean it up. If it is an aeneroid, it has a tube going from the tub to the lower part which hooks into a 3 inch or so flat sided round item with two wires coming out. With the power off, test it by blowing and sucking on the tube. Blowing into it should open the switched leads ...sucking should hold a 'vacuum'. The pressure of water opens and closes this switch to determine water level.

Jul 12, 2008 | Bosch 24 in. SHU43 Built-in Dishwasher

1 Answer

Bosch Dishwasher


carry out a reset.
This should reset the board back to factory settings,
Deep Diver

Dec 28, 2007 | Bosch 24 in. SHU5305UC Built-in Dishwasher

Not finding what you are looking for?
Bosch 24 in. SHU66C02 / SHU66C06 Built-in Dishwasher Logo

130 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bosch Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1474 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Are you a Bosch Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...