Question about DeLonghi Air-To-Air Portable Air Conditioner

2 Answers

Delonghi pac w160a...''no water symbol'' stops on in airconditioning mode even though water tank is full

Posted by on

  • drewyn
    drewyn Mar 11, 2012

    Anyone had any joy resolving this issue? As per many other posters, we also have the PACw160a model and this model does not seem to have a reset button in the power cable storage hole. I would be game to crack it open if the issue is possible related to a stuck sensor. Anyone have a proper service manual they'd be willing to share?

  • Adrian Van de Burgt Jan 01, 2013

    Is yours fixed if so let me know what you have done tks from Adrian



2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 111 Answers

In the back of these units where the cord pulls out, there is usually a red reset button, try pushing that to reset the unit, also make sure the filter is clean, pulls from the top out of the unit. Make sure the coils are clean as well behind the filter.

Good Luck!

Posted on Nov 14, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a delonghi pac w160a high power unit,and it also shows no water symbol,when it is full,how ever there is no red reset button were you said there was ?any other ideas would be great ,thank you

Posted on Jan 13, 2012

  • Adrian Van de Burgt Jan 01, 2013

    is yours fixed if so let me know what you have done tks



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How to remove water tank of delonghi P AC W130 portable air conditioner

PAC W130

Oct 29, 2013 | DeLonghi PAC W130 Portable Air Conditioner

1 Answer

DeLonghi (W160B) Portable Air Conditioner "No Water" symbol is still on despite the water tank being full

Tank hols 14 litres water where you fill there is a indicator if that is clear the tank is not full has to be red to be full. The water fill symbol will then go out.

Dec 23, 2012 | Heating & Cooling

1 Answer

The unit pac02 was working fine but it stopped after few weeks. What to do?

check the condensate tank and empty if needed, then make sure tank is installed correctly so float switch is not stuck in the full position

Jul 21, 2011 | DeLonghi Pinguino PAC-02 Air Conditioner

2 Answers

I have the same problem. My Delonghi AC (PAC W160A) shows no water symbol even the tank is full. I checked for the red button , but i couldn't locate any.

Please check float valve and sensor. Some times by mistakes the error could display. Reset it by removing power or batteries and then reset it.

Jan 10, 2011 | DeLonghi Air-To-Air Portable Air...

1 Answer

New unit installed when turned on "FT" light displays

Remove the tank if it is removable and see if you can determine how it is sensing the tank level. Maybe it's a float switch that is stuck or maybe it works by the weight of the tank. Either way your problem will be with whatever senses the tank level.

May 02, 2010 | DeLonghi PAC C120 Portable Air Conditioner

1 Answer

Empty wateron DeLonghi Pinguino Pac L 90

That probably is Ft, meaning full tank. Look on the bottom of the back side, and there should be a small "hatch" that will open. The two small hoses in there are drain hoses that can be unplugged to drain the tank. They're right at the bottom, so if you have a way to raise the unit up a little that would let you drain the water into a container. Might be a good time to clean the filter too.

Sep 08, 2008 | DeLonghi Pinguino PACL90 Portable Air...

1 Answer

PAC L90 water tank capacity

when tank is full you will get the letters FE will signal a FULL TANK
(The tank is full)

You have it setup to constantly drain GOOD.
Should you should not plug the drain hoses to get colder air.
Do let it drain . It is more convenient!
If the unit is the proper BTU for the square footage of the area to be cooled it will be cold!
If the tank gets full you will not get cool air?

Please remember to leave a rating before you go!
Thank you

Jul 28, 2008 | DeLonghi Pinguino PACL90 Portable Air...

Not finding what you are looking for?
DeLonghi Air-To-Air Portable Air Conditioner Logo

889 people viewed this question

Ask a Question

Usually answered in minutes!

Top DeLonghi Heating & Cooling Experts


Level 3 Expert

102366 Answers

Paul Carew

Level 3 Expert

2597 Answers

Donni Steen

Level 3 Expert

659 Answers

Are you a DeLonghi Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides