Question about Kodak EASYSHARE 5500 All-In-One InkJet Printer
Try to run the media sensor calibration. you can do this by pressing menu button of your printer and look for media sensor calibration., Try to clean also the printhead deep clean you can also see tis by pressing menu.
If this not solved update the firmware at kodak.com/go/downloads, when updating the firmware make sure pinter is connected to a computer and printer must turn On
If this solution not solved by doing media sensor calibration cleaning the printhead and updating the firmware
Call tech support toll free 1 800 235 6325 extension 05
Posted on Nov 12, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
I recently had the same exact problem. It seems, as with most electronic machines, its electronic circuitry needs to be reset every once in a while. So I unplugged the machine while still on, waited about 2 minutes or so and then replugged it. It started printing normally. I did take out all cartridges first, but I'm not sure that step is necessary. Give it a shot. It worked for me.
Posted on Jun 13, 2007
SOURCE: printing blank pages
Check out the online guide and trouble shooting for a solution
The manuals,online guide and trouble shooting sections could help you resolve your problem. Contact support has a chat facility on some pages that may help.
Click this Link
Under Select a Product Range
Choose Multifunction Printers on the webpage
Under Select a Product
Choose Stylus CX6600 on the webpage
Under Select an OS
Choose the operating system on the machine where you will install the printer on the webpage
Click Confirm Selection
The manuals and documentation link will allow you to download manuals that were on your CD ROM
you may want to bookmark the online guide, if present, to help with future problems -- that probably was not on the CD
Click the back button on the browser
click the Drivers and Software Link
This allows you to download software files that were probably on your installation CD
Click the back button on the browser again
Trouble Shooting and Contact Support could be an interesting link in the future too when and if you have problems.
I hope this helps
Posted on Dec 16, 2007
SOURCE: Printing out blank pages
Had the same problem and found that actually I didn't have the cartridge installed correctly. Make sure that the blue tape on the "bottom" of the cartridge came off when you pulled the tape off to install the cartridge. It is a blue translucent film which covers the port on the bottom and wraps around the front side about 1 1/2" long. On my black cartridge it didn't come off when I pulled the tab. This probably isn't the problem you're having but worth checking. Good luck.
Posted on Apr 11, 2008
Tips for a great answer:
Jan 27, 2011 | Office Equipment & Supplies
Nov 13, 2008 | HP LaserJet 1500L Printer
Aug 19, 2007 | Canon PIXMA iP4200 InkJet Photo Printer
Jan 27, 2007 | Canon PIXMA MP780 All-In-One InkJet...
Sep 29, 2014 | Kodak EASYSHARE 5500 All-In-One InkJet...
63 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: