2001 Lincoln LS 3.9 WONT START WITH 12v POWER!

images for 2005 Lincoln LS V6 wiring

Lincoln LS Wont Start. (read description) - YouTube

? 0:19
https://www.youtube.com/watch?v=hAwc0aAbc_Q
Jun 8, 2012 - Uploaded by Mike Anthony Autosports
It does not matter what this issue was or is. was never fixed. Got rid of this car December 15th 2012. Currently ...

98-02 lincoln ls no start ( fuel system problem ) or ... - YouTube

? 5:30
https://www.youtube.com/watch?v=e16ADwam2OM
Sep 27, 2013 - Uploaded by Abass Dhary
98-02 lincoln ls no start ( fuel system problem ) or no fuel pressure ... 7-12-2013 1995 lincoln towncar wont ...

Lincoln LS Starting/Stalling - Edmunds

no psi on the cylinders tells me your engine is blown or your heads are bad.

Have you cleaned the MAF sensor? I'd do that next. Ford should be able to find that problem though with a diagnostic.
Some dealers have good service and repair.....others not too good. don-ohio

If the alarm light is blinking, then the issue could be with the vehicle immobilizer or key. The key may need rematching to the vehicle's ECU, which will need reprograming by the manufacturer service centre.

Possible bad crank sensor causing your no start condition.

2 things come to mind. first a trickle charg will take about 8 to 10 hours to fully charge the battery, so you might need to charge it longer to see if the battery takes a full charge. did you try jumping the car with another.
second is it possible the charger was hooked up backwards (pos to neg and vice versa)

That sound to me like coolant bleedind related problem, take a look here.. the procedure. http://townhall-talk.edmunds.com/direct/view/.f1168da/34

I would love to answer this question but I am having the same issue. I have a 2000 LS with the V8..replaced the battery about 2 weeks ago and last night I went to go home and it won't start. All the bells ring when I turn the key but when I turn to the right to "start" position, nothing. No clicking, no noise at all. I called the Lincoln dealership and we went over the alarm light "not flashing" and shifter position. They have no advice other than "tow it in".
The vehicle had been running fine.

Seat motor,connector,wiring,fuse and position switch are the only item in the picture here,

I will start with checking the motor connector (NOT AIR BAG) first.

Fuse second and work you way to the switch,

If you are handy you can apply 12V power to the seat and see does it move.

A dirty seat track rail can also cause the fuse to blow,

inspect throttle linkage, it may be disconnected or broken