Question about Vacuums

1 Answer

Edge of carpet went into carpet; was removed, but now all rollers on the unerside don't function.

Hoover self-propelled wind tunnel supreme ujpright vacuum cleaner .

Posted by on

  • Anonymous Apr 01, 2014

    I have a Hoover Wind tunnel and I use it on the med carpet height setting. all the sudden now when vacuum it slowly slides to low carpet setting all by itself and I feel like I'm trying to push a car in park! my shoulder is killing me. I set it back in med and it just keeps going back to low. any solutions?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,673 Answers

You didn;'t say what the problem is, but I assume that the brush roll is not turning. Take of the cover over the brush roll, then you can get to the brush roll and the belt. The belt probably came off or broke. Best to replace the belt.

Posted on Jan 15, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Hoover wind tunnel self propelled vacuum #U6439-900 stop working. I checked the bag,filters,clean the roller and it's still not working.


Your motor may have siezed. You may have a cut in the cord somewhere too. Need more specifics to pinpoint problem. Did it stop working suddenly? Did it smoke of smell funny the last time it worked?

Nov 16, 2016 | Hoover Vacuums

1 Answer

My hoover wind tunnel just quit while vacuuming. It is dead??? Two years old used about every other week? Any suggestions?


Some Wind Tunnels by Hoover have a poor design in the switch on the handle. Sometimes the switch does not turn on all the way and will stop running. Other times you can't turn the unit off.

Feb 28, 2015 | Hoover Self-Propelled WindTunnel Bagless...

1 Answer

Why won't hoover wind tunnel self-propel?


Hi there! The self-propelled feature is controlled by a belt. Check the belts on your Hoover Windtunnel by following these quick steps.

1. Recline the handle. Lay the cleaner fat and flip it over to expose nozzle base.
2. Remove the screws attaching the nozzle.
3. Check that the belts are not broken, stretched or damaged.

Replace the belts if they are damaged. Hope this helps!

Jul 04, 2014 | Hoover Vacuums

1 Answer

Hoover self-propelled wind tunnel doesn't self propel going backwards.


Your self propel cable sounds like you need to have an adjustment. reccomend a service shop repair.

I’m happy to assist further over the phone at https://www.6ya.com/expert/robert_b96ba3f038cf317c

Sep 25, 2009 | Hoover Vacuums

1 Answer

Self Propel wheels not enough power to move machine over carpet.


Sounds like the transmission might need an overhaul. Take it to a local vacuum repair shop and have them look at the transmission.

Sep 03, 2009 | Vacuums

2 Answers

Hoover wind tunnel u5755-900. smoke, smell. self-propel


Can you verify the model number? However, based on your posted description, it sounds like the flat belt is either broken or fell off. to access the belts turn it over and remove the bottom plate (4 screws). the Flat belt will connect to the motor shaft in the back and the large black pulley.

I’m happy to assist further over the phone at https://www.6ya.com/expert/robert_b96ba3f038cf317c

Mar 13, 2009 | Hoover Self-Propelled WindTunnel Bagless...

1 Answer

HOW DO I REPLACE THE DRIVE BELT ON A HOOVER WIND TUNNEL SELF PROPELLED


Take the brush belt and slip it over the pull into the groove. Then take the flat belt and hook onto the motor shaft and then pull belt over pull and push it around the entire pulley. It can be difficult but after the first time it is easy. You have to push the belt up with your thumbs so the belt will wrap all the way around

Apr 06, 2008 | Hoover Company Wind Tunnel U53019 Upright...

1 Answer

Self propelled wind tunnel vacum will notpropell itself


Must be a Hoover, The flat belt may look ok but I am sure it has stretched to the point where under load it won't drive the wheels or the brush roll. Could also be a bad brush roll.

423de92.jpg

Nov 06, 2007 | Vacuums

Not finding what you are looking for?
Vacuums Logo

Related Topics:

120 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vacuums Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18425 Answers

D. Floyd Kolb
D. Floyd Kolb

Level 3 Expert

43501 Answers

Are you a Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...