Question about Kenmore 24032\24036 Top Load Washer

5 Answers


My Dryer is beeping and showing error code CF then it beeps again and shows 01 02 on the mins remaining. I tried to unplug the dryer from the socket but it still happens. Please help...I dont know the Error code CF means.

Posted by on

  • 7 more comments 
  • debl Feb 01, 2008

    My dryer is also dong the same thing other than after it is unplugged the power will not turn on. The model # according to my manual is Oasis Electric Dryer #110.6708*6709*. I too have read manual but no solution!

  • fiddle6875 Apr 18, 2008

    I have the same problem that the others have. I get the beep and the code CF come up and then the display flashes 01 second

  • krzy karl May 27, 2008

    Does anyone know what error code CF 1, 2, 3 means for a Kenmore Elite Canyon Capacity Dryer? This is model 110.67092600.

  • ClotheSoWet Sep 14, 2008

    2 year old Kenmore Elite Oasis HE Canyon Capacity Dryer, Model 110.67086600. This morning I awoke to the sound of a beeping noise coming from my dryer. It is cycling the CF code along with 01 - steady, 02 - flashing, 03 -flashing, It just keeps repeating that sequence of codes and I cannot use this $1100 doorstop to dry my clothes -- not to mention that I don't need an $1100 alarm clock.

    Two years old. 2 years!! $1100 and my clothes are wet??!!

    Was reading that a class-action lawsuit was filed against Sears for the same type of issue with their HE4-class dryers. Check YouTube. Maybe we need to add the Elite Oasis HE Canyon Dryers to the lawsuit ...?

    BTW, I believe CF = Communication Failure between the electronics modules under the dryer console and the console itself and/or the modules themselves.

  • wolverine23 Dec 05, 2008

    I have the same issue. CF ERROE AND THEN BLINKS 1,2,3. THIS is a customer dryness feature. I replaced mother board...and heater relay. and the same thing happens. Will replace the moisture senors control and see if that helps if not I will replace SEARS' front window with the dryer at high velocity.

  • Anonymous Feb 14, 2009

    Same problem - CF followed by 01, 02, 03. Purchased in late 2006.

  • Anonymous Feb 18, 2009

    well! We all have the same problem. I don't see any answers on how to fix it! so much for fixya!

  • craig carter May 11, 2010

    i work on that dryer alot please send the model no and im sure i can give you a answere

  • Gary Davd
    Gary Davd May 11, 2010

    What is your model # this way i can see who made it for Sears and get you the code. the only one i see that is close is a CE code please post your Model #



5 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have the same problem. Started a few days ago. My model number is 67086. How can I fix this? I have 2 year old twins and I'm concerned about the safety of this machine.

Posted on Nov 25, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I've had my KEnmore Oasis washer and dryer for 2 1/2 years (bought them the month they came out) and had this problem fairly soon after we bought it. The tech was able to fix it easily... I don't know what he did, unfortunately, so I can't share that info. Best of all, it was fixed at no cost to me, because I was SMART and bought the protection plan (it's not a warranty). When you buy a newly released item, it's going to have glitches... but since preventative maintenance checks are part of the protection plan, my machines have gotten two annual check-ups and are in perfect working order, they run just like new! (Other glitches: bad hinges on the washer door and blew out the thermostat on the dryer). I have always found the technicians to be very knowledgable and helpful, and have had no problem getting any of the problems we've had.

Posted on Oct 25, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have the same problem with my kenmore elite oasis electric dryer with model number 110.67082600
is this something easy to fix?

Posted on Sep 20, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My dryer is doing the same thing... I wonder if this dryer needs to be recalled.... I did call a dryer technician from sears- 1-80-469-4663, ask customer service for a dryer tech, and she told me to unplug my machine for a minute or two and plug it back in and press cancel 2 times, this resets the computer inside, so I did, and guess what, almost immediately it started flashing CF 01,02,03- the lady said that I have a electronic control board problem and she could set up an appointment to have a tech come and figure it out for me, and she could sell me a warrenty for 2100 bucks.... good job sears! You made great appliances and when they break people are out tons of money!!!!
Keep up the good work!

Posted on Jul 08, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 185 Answers

Please give model and the make

Posted on Mar 24, 2008

  • william ludolph Mar 25, 2008

    check the control interface


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I keep getting f1 error

In the event of an F-1 error try the following steps before replacing the control. Blow through the tubing to tub to make sure no obstructions is in there, make sure the tubing is airtight, make sure the tubing does not have a hole in it if all of that don't do it then watch the following video:
It is a rotor position sensor replacement video which pretty much shows what is involved with the tubing going to the bottom of the tub.

If you need further help, reach me via phone at

Jan 03, 2013 | Kenmore Oasis 4.6 cu. ft. Canyon Capacity...

1 Answer

My Kenmore Elite Oasis dryer has a CF code and continuously beeps. Running or not.

The CF error is a communication failure between the main computer and the touch may have a bad or weak connection or a bad computer..I wold recommend that you contact your local Sears and ask them about recalls, and for service should this happen again.

May 07, 2012 | Kenmore Elite Oasis 6808 Electric Dryer

2 Answers

In mid wash the Kenmore Elite Oasis HE flashes F51 and

check if basket turns freely. if it does replace the main board

Jan 28, 2010 | Kenmore Elite Oasis 27052 Top Load Washer

1 Answer

I hadn't washed any laundry for a couple days and then my Kenmore Elite Oasis starting beeping in the middle of the night. My husband had to unplug it because it wouldn't stop. The next morning I did some...

According to the Whirlpool Cabrio (Sears Oasis) manual, this code indicates a "stuck key"

Keypad/User Interface Failure
F then 2 flashes when in:
• Diagnostics Test mode if a stuck key is detected.
• Standby mode if there is a user interface mismatch.

Following is the PDF of the manual.$FILE/8178583.pdf

Sep 22, 2009 | Kenmore Elite Oasis 27052 Top Load Washer

1 Answer

My kenmore elite oasis washer will not turn on. I

its the power button its a common prob use a soldering iron and switch it with the load sinal button this happpens as the washer alallows moisture to get on the board as its not protected it will save u a ton of money and anyone can do it

Apr 26, 2009 | Kenmore Elite Oasis 27052 Top Load Washer

1 Answer

Beeping dryer & broken hinge on the washer

1 Beep/E10--Error: Water doesn't enter Cause: Water supply problem, Check kinks and faucets
1 Beep/E10--Error: Water leaks Cause: Water connections loose,household drain clog,oversudsing. Correct problems.
1 Beep/E10--Error: Dispenser drawer is open Cause: Washer will not operate if drawer is open.
2 Beeps/E20--Error: Water dosen't drain. Cause: Drain is kinked or household clog. Correct.
3 Beeps/E30--Error: Drum overfilled. Cause: Inlet valve,pressure switch or control board failure.Select drain/spin to remove water. Restart.
4 Beeps/E40--Error: Door is open. Cause: Washer will not operate if door is open. Close door.
5 Beeps/E50--Error: Motor is overheated. Cause: Wait 30 minutes to cool down. Restart.
7 Beeps/E70--Error: Cold water doesn't enter. Cause: Hoses crossed,faucet problem.
15 Beeps/EF0--Error: Oversudsing. Cause: Too much detergent,or improper detergent for machine.
15 Beeps/EF0--Error: Hot water doesn't enter. Cause: Hoses crossed,faucet problem.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Jan 20, 2009 | Kenmore 24032\24036 Top Load Washer

1 Answer

Kenmore oasis electric dryer beeps and displays code F45

We had this error on our machine for about a year before we finally got sick and tired of it. Our dryer was purchased in 2006.

Here is the solution: the code means there is an error on the thermistor. Our thermistor was loose, as were other electrical wires. My husband tightened up all the connections and the thermistor, and we have never had this error again.

However, we will never buy these machines again either, because we have had numerous other errors on the washer and dryer.

Nov 19, 2008 | Kenmore Oasis HE 27082 Top Load Washer

1 Answer

Kenmore Elite Oasis 110.6703 is BEEPING!!! ARGH!

repl./// user interface board stuck button common problem

Oct 13, 2008 | Kenmore Elite HE4 Electric Dryer

1 Answer


Below is a link that will help you with parts and diagnostic procedures that are specifically tuned to your manufacturers data plate information. This model is manufactured by Whirlpool, so maybe you can locate your model's failure codes.

If my assistance helped resolve this issue, please show your appreciation by rating how effective my advice was in resolving this issue.
Thank you,
Dave E. (Illeagle)

"Your satisfaction is my personal reward"

Jun 21, 2008 | Kenmore 67082 Electric Dryer

Not finding what you are looking for?
Kenmore 24032\24036 Top Load Washer Logo

1,074 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Sal De

Level 3 Expert

2699 Answers


Level 3 Expert

5690 Answers

Jim Goldsmith
Jim Goldsmith

Level 3 Expert

2005 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides