Question about Motorola Mobility RAZR V3i Cellular Phone
Can you tell me how to change the keypad on my V3i and if I need any special tools. I just need to change the actual silver keypad nothing else.
Motorola V3 Series & Variants
All pictures on this page have been kindly supplied by Munchie.
When dismantling any phone, great care should be taken to ensure that no damage is caused to any of the parts. Rough handling may result in severe damage of many parts, and if proper anti-static procedures are not followed, electrostatic damage may result in any electronic component.
Before commencing, it is recommended that the correct tools are purchased for the job in hand. At the very least, you will require a Torx T5 screwdriver. Do NOT attempt to use a small Allen key or filed down screwdriver, you will only damage the screws.
Step 1. Remove the battery cover.
Step 2. Remove the battery.
Step 3. Remove the SIM card.Changing keypad on Motorola V3i - v3-03.jpgimg src="http://i.fixya.net/uploads/images/v3-03.jpg" alt="v3-03.jpg" class="h_mi" />
Step 4. Remove the two Torx T5 screws Changing keypad on Motorola V3i - v3-04.jpgow and store them safely.
Step 5. Use a thin plaChanging keypad on Motorola V3i - v3-05.jpg to release the four clips holding the back cover in place.
Step 6. Rotate the rear housing away from the front carefulChanging keypad on Motorola V3i - v3-06.jpgwn below. Carefully release the flex connector using your shim or a flat bladed screwdriver.
Step 7. Use tweezers to remove the two aerial grommets.
Changing keypad on Motorola V3i - v3-08.jpg="http://i.fixya.net/uploads/images/v3-07.jpg" alt="v3-07.jpg" class="h_mi" />
Step 8. Now use your shim to carChanging keypad on Motorola V3i - v3-09.jpgmove the aerial assembly.
Step 9. The transceiverChanging keypad on Motorola V3i - v3-10.jpg can be simply lifted away.
Step 11. Now use your shim to carefully release the front fascia.
Step 12. Remove the front fascia and the buttons to the side of the handset.
Step 13. Unlock the ZIF connector and remove the camera flex then use tweezers to remove the camera assembly from the Changing keypad on Motorola V3i - v3-15.jpgbr />
Step 14. Use your shim or a flat bladed screwdriver to release the display module flex.
Step 15. Now carefully lift one corner of the display module and lift the unit away from the handset.
Posted on Jan 09, 2008
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Oct 04, 2009 | Motorola Mobility RAZR V3i Cellular Phone
Dec 08, 2008 | Motorola Mobility RAZR V3i Cellular Phone
Jan 13, 2008 | Motorola Mobility RAZR V3i Cellular Phone
793 people viewed this question
Usually answered in minutes!