Question about Kenmore Elite HE5t Washer

1 Answer

Kenmore Elite HE5t washer needs leveling. Legs are level to the floor

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 126 Answers

The legs have a lock nut that you must loosen to make the leg go up/down. once you have it where you want it, tighten the lock nut back up at the top.

Posted on Nov 12, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kenmore he5t washer Changed the pressure switch.


F21 means long drain. Yes, there is something be in the hose. You need to open the filter and clean the pump, too.

Oct 19, 2013 | Kenmore Elite HE5t Washer

1 Answer

I have a 90 series Kenmore washer, and I need to adjust the height of the back legs, but I do not know how to make the adjustment


The rear legs are floating and self leveling. If one of them legs is all the way up in the base tip the washer towards you and yank out the leg to where each side is floating. Then ease the washer back down to the floor and she will level herself off.

May 07, 2011 | Kenmore Washing Machines

1 Answer

Washer makes loud noise (seemingly unbalanced) while spinning


Suggest making sure all four (4) screw leg adjusters are set correctly i.e. does it wobble if you shake like a "pin ball machine", when not in use? If yes, adjust the screw legs in each corner. To ensure the machine is sitting level and not able to shake... God Luck

Apr 21, 2011 | Kenmore Elite HE5t Washer

1 Answer

Elite he5t washer,suds,then f35,no lights over soil level push button. I try start with only water,but the same problem.This will be problem with the sensor?Why I dont have any lights under soil level...


F35 is a water level error.
The water level switch (pressure switch) has malfunctioned.

If you remove the top panel, three screws in the back, you will have access to the pressure switch.

With the tub empty, remove the vinyl hose from the switch and blow backwards through the hose to clear any restrictions.

If the fault codes return after doing this, you will likely need to replace the pressure switch.


Also - please be sure to use He soap.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Sep 26, 2010 | Kenmore Elite HE5t Washer

1 Answer

My Kenmore Elite he5t steam washer gets F35 error code


F35 is a water level error.
The water level switch (pressure switch) has malfunctioned.

If you remove the top panel, three screws in the back, you will have access to the pressure switch.

With the tub empty, remove the vinyl hose from the switch and blow backwards through the hose to clear any restrictions.

If the fault codes return after doing this, you will likely need to replace the pressure switch.


Also - please be sure to use He soap.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.@#$%

Feb 21, 2010 | Kenmore Elite 45986 Front Load Washer

1 Answer

Can not keep the HE 3 washer from jumping around on the spin cycle. Floor is level and machine is level with legs locked in place. Have lowered leveling legs to the base and locked them tight with the...


these machines can have this problem when placed on a pedestal and/or the floor may be level but not solid. a "bouncy" floor will amplify any movements. remember, these machines are much heavier and spin much faster than top-loaders. just because it doesn't jiggle doesn't mean the floor is level. you may have to brace to floor or foundation somehow

Sep 24, 2009 | Kenmore Elite 45986 Front Load Washer

1 Answer

Kenmore elite he5t steam is locked & display says f35. What does that mean?


F35 is a water level error.
The water level switch (pressure switch) has malfunctioned.

If you remove the top panel, three screws in the back, you will have access to the pressure switch.

With the tub empty, remove the vinyl hose from the switch and blow backwards through the hose to clear any restrictions.

If the fault codes return after doing this, you will likely need to replace the pressure switch.


Also - please be sure to use He soap.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Sep 06, 2009 | Kenmore Elite HE5t Washer

Not finding what you are looking for?
Kenmore Elite HE5t Washer Logo

Related Topics:

162 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Sal DeAngelo

Level 3 Expert

2328 Answers

fordexpert

Level 3 Expert

5546 Answers

Ed Mac

Level 3 Expert

731 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...