Question about HP Compaq nx6110 Notebook

2 Answers

I broke the power pin on the back of my nx 6110 off!

I can no longer use the laptop as I cant get any power to it.

I still have the broken pin, which has come away cleanly (bugger all sticky stuff on it tbh), can I re attach it with a bit of solder? If so, how the hell do you get the bloody thing open? I have torx drivers and everything.

I ve never opened a laptop before and am very worried about being too rough with it.

Thanks :)

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: I broke the power pin on the back of my nx 6110 off!

I broke it last summer too.
I ordered power connector from thiz guy: disassembled laptop then used soldering iron with de-soldering tool and replaced the pin easily. If you havent used soldering iron yet, rather do ask someone else for help.

Posted on Jan 27, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 81 Answers
Re: I broke the power pin on the back of my nx 6110 off!

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Hp nx 6110 was working fine but suddenly it went off and now it does not boot

Power drain would be a better solution in this case.
1.first shut down the comp
2.unplug the charger
3. remove the battery
and after press and hold the power button for 60 seconds without any charger and the battery.After the 60 seconds replug the battery and the charger and turn the computer

Feb 08, 2011 | HP Compaq nx6110 PC Laptop

1 Answer

Audio drivers compaq nx 6110

You can download the drivers from the Compaq/HP WEB support/download page. Make sure you select your model laptop and the XP or Vista Windows version of the drivers you require and install them. Click on this link to download the drivers: -

May 17, 2010 | HP Compaq nx6110 Notebook

1 Answer

Hp nx 6110 don't get power

i thing in your case frist chak you Charger it's working properly if it's working then you have to remove your bettery then try to on your laptop

if not then the problem with motherboard

May 07, 2010 | HP Compaq nx6110 PC Laptop

1 Answer

I am trying to reset my bios on a Compaq nx 6110 can you help me

Why? What is the point?

To reset, find the battery and remove it or, if attached by a plug, unplug it, with the power cord and/or battery removed or disconnected.

Dec 29, 2009 | HP Compaq nx6110 PC Laptop

1 Answer

I need to unlock my compaq nx 6110 hp. (laptop) black and white screen before it boots up says password loacked

need to reset bios password. download a bios password eraser, or see if there is a reset under one of the panels on bottom of pc. usually not but i have seen them. you can pull the onboard battery for a day but usually cant get to it. best bet is check who makes your bios and get a bootable cracker

Dec 01, 2009 | HP Compaq nx6110 PC Laptop

1 Answer

Laptop screen shows balck & white grids only- no images nx 6110


I have had this same problem with a HP DV2000 and the problem is not the contrast light. What it is, is that the laptop thinks that the screen is been shut down that is why the light does not come on. The best way to solve this is to remove your keyboard first.

You can remove the keyboard by removing exactly 7 screws from your laptop back, there are 5 screws located under your battery and other two that are in the location of your RAM'S.

Just open them up and then you will notice that the key board pops out abit then just simply take it up and then just below the keyboard, on the same line where HP brand logo is on your machine there are two small clip types of pind, that you can remove and put back.
There is a clip that is hidden abit under the metal plate, so just try and remove that clip from its place using a needle or any long and thin object.

That will make the laptop not have the problem. But once you remove that the laptop constantly will think that the screen is open even if you close it. then after like a week or two you can put it back and all shall be fine if not then just remove it and keep it out.

You can then set your power options to shut down the screen light every 2 minutes or something like that so as to avoid the backlight being switched on all the time.

Hope this solves your problem.

May 26, 2009 | HP Compaq Presario F750US

1 Answer

Hp nx 6110 a power-on-password

Hi, try this:
- unplug from mains
- remove laptop battery
- remove real-time clock (CMOS) battery.
- wait 5 minutes
- replace the RTC battery and then
plug in - without the laptop battery.
The laptop battery cannot be present
when you remove the RTC battery
and shouldn't be there when you power on.

Mar 31, 2009 | HP Compaq nx6110 Notebook

1 Answer

How do i remove hp nx 6110 bios password

You have to open the back cover and remove & re insert CMOS battery on ur mother board

Dec 10, 2008 | HP Compaq nx6110 Notebook

1 Answer

I have a HP compaq nx6110, my standby icon is no longer active so

for nx 6110 if its burst u just hav to change the main board

Nov 24, 2008 | HP Compaq nx6110 Notebook

1 Answer

Compaq nx 6110

Here you have manual for ur pc:

Let me know if u got help and rate me as fixya please

Dec 05, 2007 | PC Laptops

Not finding what you are looking for?
HP Compaq nx6110 Notebook Logo

Related Topics:

340 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP PC Laptops Experts


Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers

Are you a HP PC Laptop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides