Question about Sony Ericsson K500i Cellular Phone
If it is soiled or rusted then use rust remover solution like WD-40 (easily available at any hardware shop). But if it internal problem then here is your solution but it need some skill and micro solder iron (I think you have that both). Just join the line of joystick as shown in pic and it will be OK. Enjoy but don't forget to thnx FIXYA,,,,,,
Posted on Jan 07, 2008
Tips for a great answer:
NCK = Network lock
SPCK = Service provider corporate lock
SPK = Service provider lock
Code formats you may receive for Sony Ericsson models:
Wherever possible we'll try and send you just a single unlocking code to unlock your Sony Ericsson.
However for certain models we may need to send you more than one code, even if you don't use them all.
It would be a sting of codes as per this example:
CCK: 0984118391686835 or 0984118391686835
ESCK: 0000000000000000 or 0000000000000000
NCK: 4176979876474847 or 4176979876474847
NSCK: 3908320398047435 or 3908320398047435
PCK: 2061751224321908 or 2061751224321908
SPCK: 9960493992337231 or 9960493992337231
Note: The NCK (Network unlocking code) is the main and usually the only one you'll need.
- If you see the message 'NCK: (0)' or 'Not Allowed', this means the phone is hard-locked. The phone cannot be unlocked because there has been more than 5 wrong unlock attempts.
- If your Sony Ericsson has a Joystick, then you must press the DOWN Arrow instead of the LEFT Arrow. DOWN Arrow meaning Joystick downwards
May 30, 2011 | Sony Ericsson Cell Phones
Feb 14, 2011 | Sony Ericsson XPERIA X8 Cell Phone
May 28, 2009 | Samsung SGH-D500 Cellular Phone
May 06, 2009 | Sony Ericsson K510i Cellular Phone
Apr 27, 2009 | Sony Ericsson K510i Cellular Phone
Feb 25, 2008 | Sony Ericsson W700i Cellular Phone
33 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: