Question about Cisco Catalyst 2950 24x10/100 Mbps Networking Switch

1 Answer

Network load sharing on multiple interface

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 118 Answers
Re: network

Follow these steps


int serial0
ip address ( give 1.2 to other end)
ip address secondary ( give 2.2. to other end)

ip load-sharing per-packet

ip route destination network destination mask
ip route destination network destination mask


Posted on Jan 19, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Does the Switch Support OSPF MD5 Authentication on an Interface?

Yes. For example, if interface Vlanif10 of SwitchA and interface Vlanif20 of SwitchB are on the same network segment, perform these steps to configure OSPF MD5 authentication:
# Configure SwitchA.
<SwitchA> system-view
[SwitchA] interface vlanif 10
[SwitchA-Vlanif10] ospf authentication-mode md5
# Configure SwitchB.
<SwitchB> system-view
[SwitchB] interface vlanif 20
[SwitchB-Vlanif20] ospf authentication-mode md5

Aug 10, 2016 | Networking Hubs & Switches


Cisco 1800 Series, Business Router for Small to Medium Sized Business/Enterprise

Cisco 1800 Series Integrated Services Routers, the next evolution of the award-winning Cisco 1700 Series modular access routers, own more advantages than the formers. Cisco 1800 series, ideal for small to medium-sized businesses and small enterprise branch offices, enable businesses to reduce costs by deploying a single, resilient system for fast, secure, delivery of multiple mission-critical business services, including data, security, unified communications, wireless.<br /><br /><a href="">Cisco 1800 series router</a> has several models including 1801, 1802, 1803, 1811, 1812, 1841(most popular), 1861, all of them have some common features: a. Designed for small businesses or branch offices and to offer secure wireless networking; b. Multiple performance options based on local, remote, or broadband connections; c. Integrated security including encryption and protection against hackers; d. Virtual private networks for linking to partners, suppliers, and remote offices; e. Multiple options for adding reliability and option for reduced costs by using power from network cabling; f. Software upgrades to add new features and functions, and integrated switching capabilities.<br /><br /><a href="">Cisco 1800 series</a> router has several models including 1801, 1802, 1803, 1811, 1812, <a href="">1841</a>(most popular), 1861. You can check details of every type as follows:<br />The fixed platform models (1801, 1802, 1803, 1811, 1812) include multiple WAN interface options, plus:<br />Up to broadband speeds<br />Eight 10/100 Mbps built-in switch ports with optional Power over Ethernet (PoE), for providing DC power to network devices such as IP phones<br />Up to 50 VPN tunnels<br />Support for wireless local-area network (LAN) standards 802.11a/b/g<br /><br />The 1841 is a modular platform with a wide range of interface options, plus:<br />Up to T1/E1speeds<br />Up to four 10/100 Mbps built-in switch ports<br />Up to 800 VPN tunnels<br />Support for wireless local-area network (LAN) standards 802.11a/b/g<br /><br />The 1861 is a modular platform built on a fixed base with a wide range of WAN interface options, plus: <br />Integrated Cisco Unified Communications Manager Express or Cisco Unified Survivable Remote Site Telephony for call processing<br />Cisco Unity Express, for voice messaging and automated attendant<br />Integrated LAN switching with Power over Ethernet (PoE) expandable through Cisco Catalyst Switches<br />Onboard voice ports for PSTN, PBX, and key system connections<br /><br />With Cisco 1800 Series integrated services routers; you can lay the foundation for future growth and prepare for voice, video, wireless, and security solutions tomorrow. <br /><br />If you want to know more about e about the certain type of Cisco 1800 series, you can visit the list of Cisco 1800 router series, prices also offered.<br /><br />

on Jun 30, 2011 | Networking Hubs & Switches

1 Answer

I need some help configuring this switch for VoIP appplications shared with general network. There are no VLANS configured because some users have softphones on the LAN since the router does not support...

1. Log into the switch management.
2. Click ON the QoS tab and click on the "CoS Global Configuration" on Left and enable QoS
3. Click on Apply at the bottom of the page
4. Then Click on the "CoS Interface Configuration" , Select the interfaces where the voip softphones are in use and make the "default Cos as 5" for those interfaces and click on Apply

Oct 28, 2010 | NetGear ProSafe GS748TP 48-Port Gigabit...

1 Answer

Hi,this is pavan i want to b configure the HP procurve 2626 J4900B managed switch pls help me through anybody by giving the programme to configure it

What do you need it configured to support? Multiple subnets? VoIP support?
Here's an example to support 2 subnets, VLAN 1 Data and VLAN 2 Voice. This switch is the VLAN router for the site and it is also the default gateway for all the devices on the network.

show running-config

Running configuration:

; J4899A Configuration Editor; Created on release #H.10.50

hostname "HP 2650 dot 11 layer 3"
snmp-server contact "Your contact info here"
snmp-server location "Server Rack - Upper Switch"
time timezone -5
time daylight-time-rule Continental-US-and-Canada
interface 49
name "Uplink to HP2650 port 49 -"
interface 50
name "Uplink to HP2650 port 49 -"
ip routing
timesync sntp
snmp-server community "public" Unrestricted
vlan 1
name "Data"
untagged 1-46
ip address
ip helper-address
tagged 49-50
no untagged 47-48
vlan 2
name "Voice"
untagged 47-48
ip address
ip helper-address
tagged 1-46,49-50
ip route
spanning-tree Always turn on Spanning Tree
spanning-tree priority 0 This switch is the master Spanning Tree operator.
password manager
password operator

Sep 20, 2010 | HP ProCurve 2626 (J4900B) 24x10/100 Mbps...

1 Answer

I just got this dynex 4 port ethernet hub and i have comcast wired internet . and i want to hook it up to my xbox 360 and my computer but , it wont let me . when i try to get xbox live it says network...


You need a router not a hub or a switch. with the help of the router you can share the comcast cable internet on multiple devices. A hub or a switch can not do this.

Get it replaced with a router. You can buy Linksys or Netgear router.


Aug 17, 2010 | Dynex 4-Port 10 Mbps Ethernet Hub

1 Answer

How can i connect to the internet using my switch??

Basically Internet connection required a networking connection for multiple number of PCs.There are 5 types of network connection and most simple and common network connection is Local Area Connection.You can use Windows Xp or Vista for your OS, when connection was made set up your lan from your internet server from cd provided by DSLinternet server.You should Have one PC server for your multiple PC as the administrator.If your inernet was configured from your PC server(as administrator) Share your internet using your LAN in each PC using Windows xp follow set up networking clicking additional task and click Home and office networking then follow wisard set up.You Have now internet connection in your multiple PC.

Feb 24, 2009 | Networking Hubs & Switches

1 Answer

Can I share 1 printer with 2 computers 1 Vista 1 XP with the hub?

Yes you can share out one printer from 2 computers. you can either set up a home network using arouter to connect your 2 computers. Or you can use an a /b switch to share the printer.

Nov 21, 2008 | Belkin BLKF5U201 USB Peripheral...

1 Answer

Problem with printers

the switch that you have does not require drivers or settings you can change in it. it is just a pass-through device. you can check the cables if they are working or the ports of the switch (if it lights up). moreover, check also the computers if their ip address are configured correctly and within the same range and make sure that the printer is still shared through the network.

you can check this website for reference:

Aug 25, 2008 | Linksys (NH1005) 5x10/100 Mbps Networking...

2 Answers

Setting up 16 port switch

Dear This is the step You can get a complete home network up and running in 10 easy steps. Here's a summary of what's involved: Take stock of your existing hardware. If you wish to share an Internet connection using Internet Connection Sharing (ICS), choose which computer will be your ICS host. Decide what type of network technology you wish to use. Make a list of the hardware you need for each computer. Install the network adaptors and install your modem on the ICS host computer. Physically cable the computers together. Switch on all computers, printers and other peripherals. Make sure the ICS host is connected to the Internet. Run the Network Setup Wizard on the ICS host. Run the Network Setup Wizard on the other computers on the network. Let's take that step by step. 1. Take stock of your hardware Note each computer's location and its hardware, including peripherals such as printers and modems. 2. Choose your ICS host If you wish to share an Internet connection between your computers using Internet Connection Sharing (ICS), choose which computer will be your ICS host. The ICS host has a direct connection, either by dial-up modem or high-speed link, to the Internet and provides access to the Internet for other computers on the network. Ideally, the host should be a computer running Windows XP. I'll assume you have made this choice in the following steps. Apart from XP's easy handling of ICS, by using an XP computer as your ICS host you get the benefits of using the Internet Connection Firewall. 3. Choose a network technology The most common choices are Ethernet and wireless LANs. For an Ethernet LAN you will need to install a network interface card, or NIC, in each computer and run cabling between the computers. If you don't like the idea of opening your computer to install a network card, look for a USB adaptor instead. Depending on the size of your network, you may also need a network hub or router to provide interconnection between PCs on the LAN. Two PCs can get by using an RJ-45 crossover cable; three or more computers require a hub or multi-speed hub (called a switch). If you have a high-speed Internet connection, a high-speed router is a good option. The Network Setup Wizard includes links to detailed advice about configuring your network, including help on designing a network layout to suit your home. If you opt for a wireless LAN, you'll also need a NIC for each PC (there are versions which use USB adaptors as well). The big benefit for home environments is that a wireless LAN does away with the need for cabling. On the down side, though, wireless LANs tend to be slower, less robust and appreciably more expensive than traditional Ethernet LANs. In particular, wireless LANs do not always live up to their stated working range, and you may find factors such as your home's construction and design, plus interference from other devices affect your wireless LAN's performance. You may need to add an expensive Access Point to extend the range of the LAN and, even so, it may not be sufficient. The bottom line is, if you decide to go the wireless route, make sure the store will refund your money if the LAN will not provide reliable performance within the specified range. 4. Make a list of hardware needed Make a list of the hardware you need for each computer, not forgetting any cabling, and buy it. If you're a little dazzled by the choices and configurations, consider purchasing a networking kit. These kits contain all you need to set up a two- or three-PC network. If possible, look for hardware which features the Windows XP Logo, indicating it is fully compatible with XP. 5. Install the adaptors Install the network adaptors and install your modem on the ICS host computer (you can also let the computers connect to the Internet independently by installing modems on each). 6. Cable the computers Physically cable the computers (and hubs or routers) together. Of course, you won't need to do this if you've chosen to go the wireless route. If you're installing an Ethernet network and have a lot of cabling work to do, you may prefer to get a professional to come in and do this work for you. It won't be cheap, but you can be sure you get the job done correctly and hopefully with minimal damage done to walls, ceilings and floors. 7. Switch it on Switch on all computers, printers and other peripherals. 8. Connect the ICS host Go to the ICS host computer and make sure it is connected to the Internet. 9. Run the Network Setup Wizard on the ICS host To run the Network Setup Wizard on the ICS host, click Start -> Control Panel -> Network And Internet Connections -> Setup Or Change Your Home Or Small Office Network. Follow the instructions in each screen and press Next to continue. XP's Network Setup Wizard takes much of the pain out of setting up a home network. The Network Setup Wizard will guide you through: Configuring your network adaptors (NICs). Configuring your computers to share a single Internet connection. Naming each computer. (Each computer requires a name to identify it on the network.) Sharing the Shared Files folder. Any files in this folder will be accessible to all computers on the network. Sharing printers. Installing the Internet Connection Firewall to guard you from online attacks. 10. Run the Network Setup Wizard on all computers To do so: Insert the Windows XP CD in the first computer's drive. When the XP Welcome Menu appears, click Perform Additional Tasks. Click Setup Home Or Small Office Networking and follow the prompts. Repeat steps 1 to 3 for each computer on your network. Make sure you maintain an active Internet connection on your host computer as you proceed through this process. geekgirl.tip If you don't have a CD-ROM drive on one of the network computers, you can run the Network Setup Wizard from a floppy disk: While running the Network Setup Wizard on the ICS host computer, select the option to copy the Network Setup Wizard to a floppy disk. Once you've completed setup on the ICS host, take the floppy to the next computer and insert it in the drive. Double-click My Computer. Double-click 3½ Floppy (A:). Double-click netsetup.exe. The quickie XP network If you want a really easy networking experience and you have the hardware to support it, consider clean installing Windows XP on two or more computers. First install your network hardware (network interface cards, cabling, et cetera), then perform a new installation of Windows XP. During installation, XP will sense your hardware setup, ask for a name for each computer, and then ask which type of setup you wish to create. Select Typical Settings For A Default Network Configuration. That's it. Provided your hardware is XP-compatible, XP will create a LAN using the workgroup name MSHOME. Using your network Once you have your network up and running, you can easily access other computers on the network via My Network Places (click Start -> My Network Places). The Task Pane in My Network Places lets you access computers on your network and adjust settings. The Task Pane in My Network Places lets you view your network connections and view each of the computers in your workgroup (the workgroup consists of all computers on a network which share the same workgroup name ? by default, XP gives all computers on your home network the workgroup name MSHOME, although you can change this if you wish). When you initially open My Network Places, you'll see icons for the Shared Files folder of each of the active network computers. Sharing a printer With your home network installed, your PC suddenly gains all the advantages of the other PC's on the network. If you've been lusting after your sister's colour photo printer, you can now print directly to it from your own machine. Provided, that is, your sister decides to share her printer. (You might offer to let her share your laser printer in return as an inducement ? sharing works both ways.) To share a printer, on the computer which is directly connected to the printer: Click Start -> Control Panel -> Printers And Other Hardware -> Printers And Faxes. (Note: These steps will be a little different if you're sharing a printer on a PC running a version of Windows other than XP. For example, under Windows Me, you click Start -> Settings -> Printers.) Click the printer you wish to share. Click Share This Printer in the Task Pane. In the printer's Properties dialog, click the Sharing tab. Click Share Name and OK. Make a printer accessible to others on the network by sharing it. Once a printer has been shared you can access it from other computers on the network. To do so: Click Start -> Control Panel -> Printers And Other Hardware. Click Add A Printer. In the Add New Printer wizard, when asked whether the printer is a local or network printer, select the latter. In the next screen, select the option to Browse For A Printer and click Next. Select the appropriate printer from the list and continue with the wizard. Sharing files and folders Sharing a folder is even easier than sharing a printer: Open a folder (such as My Documents), click Make A New Folder in the Task Pane and name your new folder. With the new folder highlighted, click Share This Folder. In the Sharing tab of the Properties dialog box, select Share This Folder On The Network. Provide a descriptive name for the folder. This name should make it easy for others on the network to recognise the folder; it doesn't have to be the same as the folder name you selected in step 1. You can let other people on the network view and edit your files or view them only. If you want to protect your files from tampering, remove the tick from Allow Other Users To Change My Files. There are a variety of ways to access a shared folder. Here's one way: Click Start -> My Network Places -> View Workgroup Computers. Click the computer whose files you wish to access and then click the shared folder. You can create shortcuts to shared folders to make them easier to gdfgf

Sep 08, 2007 | Networking Hubs & Switches

Not finding what you are looking for?
Cisco Catalyst 2950 24x10/100 Mbps Networking Switch Logo

Related Topics:

175 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cisco Networking Hubs & Switches Experts

Sr. Pelo
Sr. Pelo

Level 2 Expert

72 Answers

 Mike M
Mike M

Level 3 Expert

3320 Answers


Level 2 Expert

103 Answers

Are you a Cisco Networking Hub and Switch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides