Question about Coffee Grinders

1 Answer

04 nissan primera 1.8 radio

Radi will not work i just get a green band with secure in it thanks tristan

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer
Re: 04 nissan primera 1.8 radio

You have a nats system fault re-code keys or disconnect battery for 24 hrs

Posted on Jan 22, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

My Cuisanart coffee grinder does not work (no power) after only a couple of months

you have to make sure the lid is securly in place for safety it will not power on if not correctly lined up and secure.

Oct 08, 2014 | Cuisinart DCG-12BC Grind Central Coffee...

1 Answer

MIssing band on ground coffee receptacle

If you got one big enough, a hose clamp might do the trick. Fit it into place and tighten with screw driver but not too tight don't want to break anything

Sep 12, 2012 | Braun Coffee Grinders

2 Answers

How do you change the blade? I bought a new one but can't get the old one off. Thanks

Krups is among one of the foremost names in coffeemakers, espresso machines, blenders and toaster ovens. Krups also makes coffee bean grinders, such as the Krups 203a. This portable, plug-in grinder has a removable lid and bean grinder chamber. The blade on the Krups bean grinder is fastened to the bottom of the grinder chamber. You may need to replace the blade on your Krups 203. The Krups 203 comes with a limited 1-year warranty, but the company recommends you send your grinder to the company to make repairs. Order replacement parts for your grinder by calling the Krups customer service department at 1-800-526-5377.
    • 1 Unplug your Krups grinder from the wall.
    • 2 Remove the grinder's lid, and use a cloth to wipe out the inside of the grinder chamber.
    • 3 Put your safety gloves on and then grasp the blade of the grinder with your channel locks.
    • 4 Use the pliers to turn the plastic fastening nut to the left as you continue to hold the blade with the channel locks. Once the plastic nut comes loose, twist it off by hand and remove it, along with the plastic washer beneath it and the old blade.
    • 5 Set the new blade in place, and replace the washer and nut. You will have to hold the new blade in place with the channel locks as you tighten the securing nut.
Things You'll Need
  • Cloth
  • Safety gloves
  • Channel locks
  • Pliers

In case of a problem or clarification or my solution was insufficient, don't hesitate to post me a reply.

If you are satisfied, rate my solution with the "thumbs" or (even better) add a testimonial.

Jun 02, 2011 | Krups 203 Grinder

2 Answers

Grind is like powder

There are 3 springs in the holes around the top neck of the machine, the top part which sits under the collar adjustment knob.

Mar 28, 2010 | Mazzer Grinder-doser MINI

1 Answer

The on/off button comes off consequently machine isn't working

if you are handy the switch needs to be replaced. Soldering may be rquired and there is very little wire to pull. You can get a rocker switch at radio shack plus you need a triangular driver bit for base screws, It's really a poor design on a good grinder. You actually NOT have a switch and just hard wire it. I fixed mine for 3 bucks and an hours time

May 24, 2009 | Breville Conical Burr Coffee Grinder -...

2 Answers

Embarassing but...

No, wait, I found it. If it's round and is (or used to be) white, it fits on the bottom of the clear plastic hopper. Replace it and you should be in good shape again.

Jan 02, 2009 | Solis Maestro Electric Burr Grinder

1 Answer

Replace burrs?

here is solution how to to replace and order burs from producer. also you have diagram for opening and closing the grinder.

Jan 01, 2009 | Grindmaster 100 Electric Burr Grinder

1 Answer

How do I descale a Thermos?

For excessive staining use of household stain or scale remover is recommended. To remove difficult stains fill your flask with hot water, add one teaspoon of bicarbonate of soda and secure cap. Soaking overnight produces excellent results. Always rinse before re-use.
this is from
my hubby used it as he uses his thermos daily... so goodluck!

May 05, 2008 | Zassenhaus Knee Mill Hand Crank 156 Manual...

1 Answer

2001 nissan primera p11 144 dash bulb replacement

Hi have a nice day.
Disconnect the battery cable first. Then, remove the trim around the instruments. You will probably need to drop the steering column to get access
good Luck !

Jan 11, 2008 | Coffee Grinders

Not finding what you are looking for?
Coffee Grinders Logo

Related Topics:

364 people viewed this question

Ask a Question

Usually answered in minutes!

Top Coffee Grinders Experts

Ernest R
Ernest R

Level 3 Expert

1618 Answers


Level 3 Expert

345 Answers

Tony R.
Tony R.

Level 2 Expert

24 Answers

Are you a Coffee Grinder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides