Question about Linksys Wireless-G Broadband Router

2 Answers

Wireless router installation

I am a student at Tshwane university of technology,I have a project to install and configure a WRT 54G broadband router,may you please haelp me with the necessary point to point steps on how I can go about doing this.

Yours sincerely
G.P Mabuza (Miss)

Posted by on

  • Anonymous Jun 01, 2008

    can't connect a computer to the router

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Cable out of wall to modem, or phone line out of wall to modem, depending on dsl or broadband( phone line is dsl- cable is broadband)phone cord from modem to router , 1nd ethernet cord from router to pc, then run cd that came with router (wrtg) is a (linksys wireless router-works great) and follow on screen prompts, works perfect! use usb wireless adapter to eliminate ethernet cord . (netgear usb wireless adapter) works great.!

Posted on Mar 16, 2008

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 135 Answers

Please see my response to this question. Your university's connection is most probably a LAN connection, so you'd need to follow the instructions as if you had a cable internet connection (unlike DSL, a LAN connection and cable internet connection don't require authentication with the ISP).

Posted on Jan 07, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wireless 2.4ghz router for wifi


Wrt54g can be used as either a wireless router or access point. I am not familiar with your broadband service, but if it has a data port just connect it to Internet port.

Nov 02, 2017 | Linksys Wireless-g 2.4 Ghz Broadband...

1 Answer

Client Mode or 2nd Wireless Router with new Subnet Mask?


The original firmware does not have this option, but you can get a custom firmware at http://www.dd-wrt.com/

DD-WRT is not supported by linksys, so a little caution there as this could ruin your router if it is not installed properly. Fortuately they have plenty of documentation on installation and troubleshooting if needed.

Also found this on how to setup Client Mode through DD-WRT - http://www.dd-wrt.com/wiki/index.php/Client_Mode_Wireless

May 20, 2012 | Linksys WRT54G Wireless-G Broadband Router...

1 Answer

I need to reset the password on my linksys Wireless GBroadband router WRT 54G without ruining my wireless set up in my house!


Use an Ethernet cable to connect your computer directly to the router.
Access the web-server "inside" the router.
Login to the router, with the current ID/password.
View the wireless settings:
* SSID
* encryption-level ('WPA' or better, please)
* network password

and change it, if you need to.

Feb 21, 2011 | Linksys Wireless-G Broadband Router

1 Answer

I have a linsky wireless G 2.4 Ghz 54Mbps (model WRT 54G) I have the cd, but I do not have the password. I am not sure if this is the reason, I can't set up my network. How do I get another password


Linksys WL router always has default password "admin" you will have to reset router to factory defaults by plugging Pin in to Tiny Hole on Router back side for 5 seconds. and then login by default ID "admin" and password "admin" to configure router again. [Remove Inverted Commms from User name password while entering

Mar 09, 2010 | Linksys Wireless-G Broadband Router

1 Answer

How to configure a wireless connection


Hi friend,

firstly make sure if you user Windows XP , you install service pack 3 in your system before the wireless configuration,this is not necessary but it protect your system  against hackers,If you user Windows Vista you need to install Service pack 1.
many wireless technologis in market like 802.11a and 802.11g,most popular is 802.11g.firstly you need some necessary equipment for wireless network technology-
1-Wireless router
2-wireless network adapter
3- Broadband Internet connection
firstly unplug the cable modem,connect your wireless router to your modem,your computer will through wireless connect to your router, and the router will send communications through your modem to the Internet.
turn on the system and open Internet Explorer and type in the address to configure your router.You might be prompted for a password. The address and password you use will vary depending on what type of router you have, so refer to the instructions included with your router.
The exact steps you follow to configure these settings will vary depending on the type of router you have. After each configuration setting, be sure to click Save Settings, Apply, or OK to save your changes.
I think this is helpful to you.

Thanks,

Jan 07, 2010 | IBM ThinkPad T41 Notebook

1 Answer

Contant need top reboot the program


Do a wireless scan on your computer and out how many wireless access is in your neighborhood. More than likely that your router is sharing the same wireless channel number as your neighbor's. Go to your router and cheange to opposite of what your neighbor is on.

Dec 20, 2009 | Linksys WRT160N Wireless Router

1 Answer

We have 16 Computers 1 broadband connection of bsnl and one


There is a pretty good writeup here:
http://www.team-bhp.com/forum/gadgets-computers-software/36499-bsnl-broadband-wireless-configuration-2.html

But if you have already configured the modem and it does work.
All you need to do is plug an ether net cable from that to the 'Uplink' port on the back of the WRT router.

After that it should serve that conection out to the machines that are cabled to it. The other machines that you will connect wirelessly can be done through the web interface to the WRT. Which will appear at 192.168.1.1

Apr 18, 2009 | Linksys Wireless-G WRT54G Router

1 Answer

I have linksys wireless router how to secure by


-Logon to the configuration page of the router by opening a browser and type in the IP Address of the Linksys which is 192.168.1.1

Mar 03, 2009 | Actiontec GT704WG Wireless Router...

1 Answer

Installation of router


This is the linux version of the 54G router. It is assumed anyone using this router is loading their own custom firmware such as dd-wrt for which all the instructions are on the dd-wrt website.

May 10, 2008 | Linksys WAG54G-UK Router

1 Answer

Cannot access router webpage


Make sure your firewall and anti-virus are switched of then try and connect to the webpage

Jun 13, 2007 | Linksys Wireless-G WRT54G Router

Not finding what you are looking for?
Linksys Wireless-G Broadband Router Logo

241 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2263 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Michael Galve
Michael Galve

Level 3 Expert

1269 Answers

Are you a Linksys Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...