Problem for Wheelchairs
Generic problem for all Wheelchairs
Pride power chair jet 7
i charged the power chair, and when it is charged the chair will not go, when i unplug it
Solution #1
posted on Nov 16, 2009
Rank: Wiz
Expert
Rating: 84%, 37 votes
Have the batteries load tested. Most likely they need to be replaced.
Popular Solutions for Wheelchairs
Pride Mobility Products New Pride Mobility Jet 3 Ultra Power...
1 Solution
Invacare Supply Group Invacare Pronto M51 Power Wheelchair -...
1 Solution
Questions and Unsolved Problems for Wheelchairs
I am a wheelchairbound individual, who relies on the wheelchair for all mobility needs. I weigh...
(More)
I am a wheelchairbound individual, who relies on the wheelchair for all mobility needs. I weigh approx. 250 lbs. The chair need to be user friendly in regards to the weight. I need to fold the chair and lift the chair into my car. The chair must be durable because it goes every where i go and sometimes uneven surfaces. The chair must also be able to pass thru standard doorways. I live to sit up and not down (like sitting in a hole). The seat and back must be durable and not stretch so easily.
working on a pride wheelchair that i just put (2) 12v33 amp batteries in. im getting 24 volts to the...
(More)
working on a pride wheelchair that i just put (2) 12v33 amp batteries in. im getting 24 volts to the controls but the control only flashes and motor wont even try to engage. its a dl 5.2i dynamic controller.
jet 3 ultra 3 Flashes The left motor has a short to a battery connection
i need a used quickie 646se with 17" seat
Dear Sirs A member of my family has a Jet3 power chair with serial J1702402205S10. The chair has not...
(More)
Dear Sirs A member of my family has a Jet3 power chair with serial J1702402205S10. The chair has not been used for a while and it needs to be checked. As the chair is in Quito-Ecuador, we kindly ask you to send the owners manual in spanish. Truly yours Miguel Seelig mseelig@minerva.com.ec
