Question about One For All URC-8811 Remote Control
Lost instructions to program
Hello, follow this link to download the manual and the codes for your remotes:
just right click and save as on the download links.
if this does not work you can try the search method,
you do this by either holding down the device button eg: TV or if you have one the "magic" button for three seconds, a light should then flash twice to say you have done this correctly.
then press the keys 991 then the power button.
you must now press the channel up key (ch+) possibly upto 150 times while the remote cycles through every code.
Once your tv or device switches off stop pressing the ch+ key and press the power button to make sure it switches back on,
(if you press ch+ too many times you can go back by pressing ch-)
When complete press the magic or device key again to save the settings (light should flash twice to confirm)
(For replacement remotes visit www.sparky-uk.com)
Posted on Jan 07, 2008
1) turn on unit
2) press and hold componet button on remote (TV, VCR, etc)
until On/Off lights up
3) press and hold On/Off while holding component button. Light will go out. Continue hoding both buttons until light comes back on.
4) release both buttons. On/Off should stay on.
5) Press On/Off repeatedly until unit turns off.
6) Press the Stop key at bottom.
7) light goes off. Remote is programmed!
Posted on Jan 11, 2009
Here is a link to that manual:
Posted on Mar 23, 2009
Tips for a great answer:
May 03, 2016 | Innovage Jumbo Universal Remote Control
Jun 25, 2015 | Sony Remote Controls
Sep 12, 2012 | Universal Remote Control GE174Universal...
Apr 15, 2011 | GE JASRM24912 Remote Control
Sep 03, 2009 | Philips PM3S Remote Control
May 25, 2009 | RCA Universal Remote Control
Sep 28, 2008 | Philips Magnavox Learning Universal Remote
Sep 18, 2008 | Philips Magnavox Learning Universal Remote
Mar 16, 2008 | Philips Magnavox Learning Universal Remote
Mar 13, 2008 | Remote Controls
91 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: