Question about One For All URC4220 Remote Control

1 Answer

Code for tv

I'm Looking for a code for an emersom tv.

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 129 Answers

Hello, follow this link to download the manual and the codes for your remotes:
just right click and save as on the download links.

if this does not work you can try the search method,
you do this by either holding down the device button eg: TV or if you have one the "magic" button for three seconds, a light should then flash twice to say you have done this correctly.
then press the keys 991 then the power button.
you must now press the channel up key (ch+) possibly upto 150 times while the remote cycles through every code.
Once your tv or device switches off stop pressing the ch+ key and press the power button to make sure it switches back on,
(if you press ch+ too many times you can go back by pressing ch-)
When complete press the magic or device key again to save the settings (light should flash twice to confirm)

Many thanks
(For replacement remotes visit

Posted on Jan 07, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Image too big

At top of remote slide the bar over to "TV" then press the format key in top left corner and step thru the different formats until you see what you like then push "select button" and slide bar back to the original position

Dec 28, 2013 | Televison & Video

1 Answer

Where can I get an orignal remote for the tv

Just look for it at Ebay. If there is an authorized service center for Emerson at your town, you can buy an original remote control from there. If not, buy a universal remote control, which have setup codes for Emerson Brand TVs. For your information, I hereby attaches the codes for Emerson brand TVs. Compare these codes with the universal remote control you want to buy.
Codes for Emerson are: [3-digits]: 004/ 009/ 014/ 023/ 024/ 025/ 026/ 027/ 030/ 032/ 033/ 034/ 035/ 036/ 037/ 038/ 039/ 040/ 041/ 042/ 043/ 045/ 046/ 049/ 053/ 116/ 135/ 147/ 177/ 179

Four digits: 0004 0009 0044 0135 0049 0051 0189 0053 0147 0039 0130 0227 0233 0250 0252 0254 0257 0265 0266 0310 0325 0456 0040 0041 0042 0021 0023 0024 0179 0045 0025 0027 0030 0032 0034 0035 0037
The Brand name of the remote isn't a matter. It should have any of these codes or code groups in its code list [attached with the remote control]. Good Luck.

Oct 18, 2012 | Televison & Video

1 Answer


User manual for Emerson and Funai are the same. Just download the user manual to your Emerson TV from one among the following links. If you feel adny difficulty in downloading the same, inform your email address to me by fixya comment. I'll send a copy of the manual to you by return mail.

Mar 03, 2012 | Emerson CR202EM9 TV

1 Answer

I am looking for the tv codes for a tvg1307 remote.


You're asking for the wrong thing, you need to be looking for the TV Codes rather than the Remote Codes.

Any remote can work as long as it has the correct TV code for your TV.

You can find the codes here:

Mar 01, 2011 | Televison & Video

1 Answer

Code for directv remote control

The following code should work with your model. 11394
Setup Instructions
  • Set the "Mode Switch" to TV.
  • Press and hold the "Mute" button and the "Select" button until the visible LED blinks twice.
  • Enter the 5 digit Code above.
  • Try your code.

  • These codes may also work:
    10180 10177 10236 10185 10039
    10179 10282 10463 11963 10171
    10178 11944 11911 10270 10280
    10623 11661 10158 10181 10183
    10017 10182 10451 10002 10019
    10038 10154 11928 11929

    Jan 07, 2009 | Directv Universal Remote

    1 Answer

    RE: Emersom Universal Romte

    goto this website this will help

    Aug 24, 2008 | One For All URC-3021 Remote Control

    3 Answers

    No picture with DVD input

    Your going to need the original remote to switch back to AV input in the menu. It should explain in the owners manual how this is done. If you do not have that or cannot find the manual go to a search engine and look up emersom dowmloads it will show up as I think PS dont forget to rate this.

    Oct 11, 2006 | Emerson SpongeBob SquarePants TV

    Not finding what you are looking for?
    One For All URC4220 Remote Control Logo

    Related Topics:

    37 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top One For All Televison & Video Experts

    The Knight
    The Knight

    Level 3 Expert

    75591 Answers

    Cindy Wells

    Level 3 Expert

    5481 Answers

    S. Gontko

    Level 2 Expert

    142 Answers

    Are you an One For All Televison and Video Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides