Question about Computers & Internet

2 Answers

Quickcam Pro 9000 Problem


I just installed the Logitech QuickCam Pro 9000 and when I activate the camera I am getting four repeating distorted black and white pictures on one screen alternating with the full colour single picture. The camera can't hold the normal picture and flickers between normal and distorted black and white pictures. I have tried the V11.1 and V11.5.0 drivers and still the same problem. Any suggestion how to fix it.

Best regards,


Posted by on

  • ColinChester Dec 28, 2008

    We have the same problem here. If we increase the resolution to the higher settings, it does hold the picture properly, but this is no good for Skype etc where we need to work on a low res setting. We have tried all the settings in the Logitech menus and nothing seems to help.

  • Anonymous Jan 09, 2009

    I'm going crazy.



2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had the same problem with my integrated graphics equipped computer. The guy I spoke to at Logitech had me lower the the Hardware Acceleration setting down 3 notches from the  full setting (!?!!). (You "disable all DirectDraw and Direct 3D accelerations"). To my surprise this did the trick and everything now works great! I now have to figure out how to set a "profile" on my computer so that this setting is only activated when I'm using the webcam software and when I turn it off I will go back to Full Hardware Accelation again for my other programs that may want it.(right click on desktop->properties->settings tab->advanced->slide the tab->click apply)

Posted on May 07, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 1,000 questions.

  • Master
  • 1,067 Answers

U try to mess around with master settings of web cam cheak and uncheak few things in the options menu of cam see if u can get itto work are useing usb 2.0 ports

Posted on Jan 07, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

I have a webcam but i don't have a cd installer, my webcam specification was LOGITECH M/N:V-UBM46, PID;LZ906BP, P/N 860--000109.. i do hope you can help me thanks....

The P/N will let you find the camera software for the 860-000109 here: . This part number is for the QuickCam Pro 9000 or the WebCam Pro 9000. Based on the model number, V-UBM46, you have the QuickCam Pro 9000. Scroll down to find the correct software for the operating system on your computer. The QuickCam Pro 9000 can be used with the LWS (Logitech Webcam Software) versions 1.1, 2.31, 2.51 and 2.80. LWS 2.51 and LWS 2.80 do not support the Video Effects. LWS 2.80 works with Windows 8 and 10 and the direct link to the program installer is . Links to all versions of LWS are at the bottom of the second chart. Additional information and FAQs are available here: .

I hope this helps.

Cindy Wells

Jan 29, 2017 | Logitech Computers & Internet

2 Answers


Logitech drivers are available from their WEB download site- click on this link and select your model WEBcam to download : -

Apr 10, 2011 | Logitech Webcam

1 Answer

I have a Logitech QuickCam Pro 9000. I also have an install CD for Windows XP. My old old computer died. My new computer has Windows 7. I can not download the software to activate my Pro 9000. What do I...

First uninstall any WebCam software that you have. To do this unplug your camera from the USB, go to Control Panel > Programs and Feature. Next, download the full installer (select from the drop down list) for your camera and install it. The setup will guide you trough the process and eventually will ask you to plug the camera back in.
Good luck

Mar 16, 2011 | Logitech QuickCam Pro 9000 Web Cam

2 Answers

QuickCam Pro 9000 Web Cam: I plug in my Logitech Quickcam Pro 9000 and it wil...

It is possible your webcam is either disabled or the driver is corrupted. Try reloading the webcam software driver, reboot, and then try the free webcam test tool to check if it is working properly.

May 06, 2010 | Logitech QuickCam Pro 9000 Web Cam

1 Answer

I have a quickCam Pro 9000. I tried installing it


Logitech has released new cam drivers for windows 7.Please click on the below link to download it.Once you click on the below link just click on run.After it is finished downloading just follow the onscreen instructions to install the drivers for windows 7.

Thank You for using fixya

Nov 11, 2009 | Logitech QuickCam Pro 9000 Web Cam

1 Answer

I have Ubuntu 9.04 in my PC and i don have drivers to install my Logitech QuickCam Pro 9000. Can somebody help me?Pleace! Magdalena


Currently the driers are available only for the Windows and Mac platform.

If you are looking for Ubuntu drivers then only Logitech support can help you.

LOGITECH Technical Help
cb_transparent_l.gifus.gifspace.gifspace.gifarrow.gifspace.gifspace.gifspace.gifspace.gifspace.gifspace.gifspace.gif800 600 1133cb_transparent_r.gif
Monday - Friday: 9:30am - 6:30pm

Oct 11, 2009 | Logitech QuickCam Pro 9000 Web Cam

1 Answer

Camera doesn't come on when I try to activate installation.

sotware for cameras dont work for apple unless in UVC mode means plug and play. here is a list of cameras compatiable to apple computers.

amera Name P/N QuickCam E3500/E3560 860-000095 QuickCam Ultra Vision SE 860-000023 QuickCam Ultra Vision 861238 QuickCam Orbit/Sphere MP 861305 QuickCam Fusion 861304 QuickCam Pro 5000 861306 QuickCam Pro 9000 861464 QuickCam Pro for Notebooks 860-000026 QuickCam for Notebooks Pro 861303 QuickCam Communicate MP (S5500) 860-000106 QuickCam Communicate Deluxe (S7500) 860-000107 QuickCam Communicate Deluxe 861235 QuickCam Deluxe for Notebooks 860-000009 QuickCam Vision Pro for Mac 860-000143
QuickCam Orbit AF 860-000063

Jul 11, 2009 | Logitech Quickcam Chat Webcam

1 Answer

Logitech QuickCam Pro 9000 - Movie Sound?

Normal 0 You need to go to the manufactures site and download the VISTA driver for the camera. Then follow the info below to install the program.

Disconnect the Camera from the USB port and reinstall the CD or Downloaded software program. When the program asks you to connect the camera to the USB port, do so and it should work.
Hope this helps. Bud

Jun 30, 2008 | Logitech QuickCam Pro 9000 Web Cam

1 Answer

Logicon Webcam problems


For Jrsmith210 :

Try using this :


You can get a manual from here :


Mac OS 10.4 or Above

To use a Logitech camera on your Mac OS X computer, please purchase a Logitech camera that is UVC compliant, this camera will have basic functionality for use with a third party application but no additional features will be available such as (Rightlight, Rightsound or Video Effects)

All UVC Complaint Webcams listed in table below

This article applies to the following platforms:
Macintosh OS X 10.4.9 - 10.5.2

The Logitech webcams listed below are UVC (Universal Video Class) compliant and can be used with operating systems which fully support this standard; including Mac OS 10.4.9 and above.

Please note that standard UVC drivers are provided by the Operating System and will provide minimal camera support only. Unique Logitech features, such as RightLight and Video Effects are not functional via UVC drivers.

Furthermore, we recommend the use of a full Logitech installation package, where available, for supported operating systems such as Windows XP and Windows Vista.

Camera Name                                       P/N
QuickCam Ultra Vision SE                 860-00023
QuickCam Ultra Vision                       861238
QuickCam Orbit/Sphere MP               861305
QuickCam Fusion                             861304
QuickCam Pro 5000                          861306
QuickCam Pro 9000                          861464
QuickCam Pro for Notebooks          860-000026
QuickCam for Notebooks Pro                861303
QuickCam Communicate Deluxe     861235
QuickCam Deluxe for Notebooks     860-000009
QuickCam Orbit AF                       860-000063

Try these, as the manufacturer's site is saying that the 3000 is not compatibl with Mac OS.

For Guest :

You can download the software from here :,en

Select the opeating system, download, install and use.

Good Luck.

Live, Love, Laugh.

Apr 14, 2008 | Logitech Webcam

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

594 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers


Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14162 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides