- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
go back to your services where you start the print spooler. open the dependency tab. there it will tell you what other services the print spooler needs to have running. check them and if any are disabled change them to auto and restart them. reboot and you should be OK.
Filling your cartridge with non-HP ink won't cause an error. There are basically two reasons for ink system failure, The cartridge is no good or the ink system has failed. Some of these machines can be reset. But, try replacing cartridge first.
The printer displays an assert error code. Assert error codes indicate that the printer has an internal condition that may respond to a hard reset of the printer. Beyond that, service may be required. This document applies to the following products:
HP Photosmart p1000/1000, p1000xi printers
HP Photosmart p1100, p1100xi printers
HP Photosmart 1115 Printer
HP Photosmart 1215, 1215vm, 1218, and 1218xi printers
HP Photosmart 1315 Printer
SOLUTION: Hard reset of the printer
A hard reset of the printer may clear the error. Here is how to perform the hard reset:
Shut down the computer.
Open the top cover of the printer and remove the print cartridges.
Close the top cover of the printer.
Press the power button on the printer to turn the printer off.
Disconnect the communications, (USB or Parallel), cable from the back of the printer.
Disconnect the power cord from the back of the printer for one minute.
Reconnect the communications cable to the printer.
Reconnect the power cable to the printer.
Press the printer power button to turn the printer on.
Open the top cover and reinsert the print cartridges.
Close the top cover and print the calibration page.
I have a HP Photosmart C6180 All-in-One printer. When I try to print I get error code Oxc05d2281 on the printer scren. I have replaced all the carriages with new one. Please tell me how to fix this problem.