Question about Samsung ML 1651N Laser Printer

1 Answer

Samsung 1650 Laser Printer

Printer recently stopped working. No lights or any sign of life when plugged in and turned on. I disassembled the covers to try to get to the power supply but it got a little tricky for me so I figured I'd try asking for help before completly tearing it apart. Any sugestions or history with these printers?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Samsung Expert
  • 113 Answers
Re: Samsung 1650 Laser Printer


It seems the the power supply boad is dead. in short we call it (SMPS).

if you are electronic trained than you may want to go ahead and dissemble the printer to check on the SMPS fuse, capacitor and transformer.

unscrew the left side cover of the printer. open back & front cover and by using pull techic don't worry if you control your strenght the cover will not break.

Hop this Help :)

Samsu Tech

Posted on Apr 17, 2010

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

The printer does not accept print jobs and orange warning light is on along with green ready. Both lights sart blinking when a printing job is sent. The printer does not print. How can I fix the probl

I am not familiar with Ubuntu. So in case of windows SMART PANEL/EASY PRINTER MANAGER can be down loaded from samsung web this will show the errors that the machine has.

Try to print a self (demo page) pressing stop s/w a while. If it works check the life of toner cart.


Sep 19, 2014 | Samsung ML-2571N Laser Printer


Resetting Blinking Toner Light HL-2140

Here is the procedure for resetting the Toner flashing light on Brother HL-2140 (sources for other answers here and self testing - specific to HL-2140)
  • Open the front cover and leave open.
  • Turn the printer off.
  • Hold the "white button" while turning the printer on. (All panel lights should be on.)
  • Release the "white button".
  • Press the "white button" 2 times (Pause, wait for all lights to come on.)
  • Press the "white button" 5 times. (All lights to come on again, then go out.)
  • Cancel "maintenance driver" install, if prompted
  • Close cover.
  • Power cycle printer.

This will:
  • reset the toner light (stop blinking)
  • restore the printing darkness (when toner light flashes, printer prints lighter to save toner)
  • keeps the printed page counts and drum life info

on Mar 06, 2011 | Brother HL 2140 Laser Printer

1 Answer

I have a printer samsung clp 300 a problem occur while printing a diolog box is open and message is door open and then stop priting what the problem please tell me sir on my mail id i am very thankful for...

This is a sensor problem, the sensor is insite the printer and it needs to be disassamblied to change, you can try to press the front cover from left site and try then from right site and try, if it still work like this it needs adjustment only, if not the sensor need to be renewet by samsung!

May 11, 2011 | Samsung CLP 300 Laser Printer

2 Answers

My printer samsung 4200 in LSU error

the problem is in laser module, disassemble laser module and clean poligon mirror and glasses with cloth and alcohol, if no effect replace laser module

Jan 21, 2011 | Samsung SCX 4200 All-In-One Laser Printer

1 Answer

When I turn my printer on, the red light stays on and I can't print

Are any of the toner lights lit? Then the problem is you are out of that color toner and must replace it.

If the toner lights are off, then the printer has an error that must be corrected. Check for a paper jam, an open cover, no paper in the tray (or not being picked up by the rollers), the waste toner container being missing or full.

The other errors that could be at fault are service errors: LSU (laser unit) error, fuser error, or ITB
error. For these, you need to contact Samsung support for the part numbers. The fuser should last 100,000 pages. The ITB has an expected life of 60,000 black and white pages and 15,000 color pages. Samsung recommends these be replaced by a certified technician.

The unit will not print until the fault is fixed.

I hope this helps.

Cindy Wells

Sep 30, 2010 | Samsung CLP 300 Laser Printer

1 Answer

Printer stops when printing should begin with red light in status

There is a few reasons that cause the status light to turn red, paper jam, paper empty, toner cartridge empty, cover open and waste toner cartridge full. The PC Smart panel utility should give you an exact fault condition. Hope this helps.

Jul 08, 2010 | Samsung CLP 300 Laser Printer

3 Answers

Samsung ml1640 laser red light blinking

samsung ml1640 laser red and green light blinking continuously and printing not happening

Jul 02, 2010 | Samsung ML-1640 Monochrome Laser Printer

1 Answer

Printer prints too light

dust in the LSU (laser unit), you have to clean LSU.

Nov 25, 2008 | Samsung ML 1710 Laser Printer

1 Answer

Won't complete cycle

we have Samsung color printer, model CLP-500, not working. Please suggest Samsung service centre in India.

Feb 02, 2008 | Samsung CLP 300 Laser Printer

Not finding what you are looking for?
Samsung ML 1651N Laser Printer Logo

108 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Printers & Copiers Experts


Level 1 Expert

185 Answers


Level 2 Expert

166 Answers

 Mike M
Mike M

Level 3 Expert

3320 Answers

Are you a Samsung Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides