Question about One For All URC-6131 Remote Control

1 Answer

Programming codes I got a jumbo universal remote made by innovage products.  I got it programmed for my TV and DVD unit, but my cable box is made by Motorola, and there wasn't a code for that brand.  Can you help me? code remote controls

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert whose answer got voted for 20 times.

  • Expert
  • 129 Answers
Re: Programming codes

Hello, follow this link to download the manual and the codes for your remotes:
just right click and save as on the download links.

if this does not work you can try the search method,
you do this by either holding down the device button eg: TV or if you have one the "magic" button for three seconds, a light should then flash twice to say you have done this correctly.
then press the keys 991 then the power button.
you must now press the channel up key (ch+) possibly upto 150 times while the remote cycles through every code.
Once your tv or device switches off stop pressing the ch+ key and press the power button to make sure it switches back on,
(if you press ch+ too many times you can go back by pressing ch-)
When complete press the magic or device key again to save the settings (light should flash twice to confirm)

Many thanks
(For replacement remotes visit

Posted on Jan 07, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

2 Answers

Jumbo remote codes and steps

I have found the iWave, Innovage, and generic "JUMBO" are the same remote.
Here is the link to the manual. It looks like it has a easy to do auto-search button, for TV's not on the list.

Good Luck

Dec 16, 2009 | Innovage Jumbo Remote Control

2 Answers

Innovage products jumbo universal remote - cable box code

Did you try the above method frim the manual

Dec 26, 2007 | Remote Controls


How to Program your Innovage Jumbo Remote Control



Would you like to program your Innovage Jumbo Universal Remote to your TV, DVD, VCR, Satellite or Cable Box?
Have you tried the Auto Search function?

To have the remote try each TV code it knows one at a time, follow these steps:
  1. Turn on your TV.
  2. Press and hold the CODE SEARCH button for at least 3 seconds until the red LED lights up and stays lit.
  3. Press the TV button on the remote so that the LED blinks once and then remains solid red.
  4. Press the ON/OFF button slowly and repeatedly untilthe TV turns off. The LED will blink once each time you press theON/OFF button.
  5. Once the TV turns off, press the ENTER button to store the code and the LED will turn off.

When searching for a TV code, the remote will try all the codes it knows for every TV brand it know. To search for a DVD or CBL code, make sure you substitute the DVD or CBL button for the TV button in the directions above, because it doesn't attempt DVD codes while in TV mode.

When programming the Innovage Jumbo Remote control for cable or satellite services such as DirectTV or Comcast, or other digital TV and service providers, make sure to auto-search through both CBL and SAT code sets to find one that will control your set top box.

I hope that helps.

on Jan 02, 2010 | Innovage Jumbo Remote Control

1 Answer

Need codes for Innovage Jumbo remote control with a Freeview box.


Dec 25, 2008 | Universal Remote Control Remote Control

4 Answers

Codes to program Innovage Products Jumbo Universtal Remote

Innovage Jumbo remote codes for RCA TV; 000, 003, 004, 005, 007, 009, 011, 015, 048, 082, 092, 094, 096, 098, 102, 103, 107, 113, 125, 129, 167, 179, 187, 188, 191,194.
Pansonic DVD; 175.
Pansonic VCR; 021, 060, 115, 125, 138, 148, 149.
Philips DVD; 173, 183, 198.
Bell ExpressVu; 168, 187, 194.

Dec 18, 2008 | Remote Controls

3 Answers

Innovage products jumbo remote

need code for jumbo remote

Jun 14, 2008 | Remote Controls

1 Answer

Codes to program Innovage Products Jumbo Universtal Remote

Try this site;

Good luck

Mar 03, 2008 | Remote Controls

1 Answer

Codes to program Innovage Products Jumbo Universtal Remote

I need the code for my rca tv so I can program the inovage jumbo universal remote Pleaseeeeeeeeeeeeeeee

Dec 31, 2007 | Remote Controls

14 Answers

Codes to program Innovage Products Jumbo Universtal Remote

H have the jumbo universal remote from innovage pruducts. can you e-mail me all the codes? thanj you.

Dec 15, 2007 | RCA RCU600M Remote Control

Not finding what you are looking for?
One For All URC-6131 Remote Control Logo

122 people viewed this question

Ask a Question

Usually answered in minutes!

Top One For All Remote Controls Experts

The Knight
The Knight

Level 3 Expert

66685 Answers

Cindy Wells

Level 3 Expert

4723 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you an One For All Remote Control Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides