kodak easyshare c613: memory card says its full when there is no pix on it, what happens is: i turn it on, says "memory card full", i go to review, says "no pictures or videos to display on memory card", exit review, says "memory card requires formatting" i choose to format it, says "formatting..." then its goes back to "memory card requires formatting", just keeps repeating it self. i inserted a new memory card same thing happens. the card use to work fine until one day it started saying this stuff. the card isnt locked and its the correct card for the camera, ive formatted it on the camera and on the computer. any suggestions on how to fix it? SD card 1gb and SD card 2gb are what im using.
Comments:
Nov 14, 2009
- i figured out its the pins inside the camera that help it read the memory card, 2 of them arent touching the memory card, thats why i keep getting the msg.
If you connected the camera to the computer with a USB cord to download your pics and then just yanked out the cord without using the "safely remove hardware" icon at the bottom right corner of your screen, the card may have been corrupted. Replace it.
Was this helpful?
Yes
No
Popular Solutions for Kodak EasyShare C613 Digital
You can only see a partial picture on the LCD screen there are lines on the C613 camera. Screen is...
(More)
You can only see a partial picture on the LCD screen there are lines on the C613 camera. Screen is blocked with blue and grey lines
camera not turning on and off properly , it wont take pictures when i do get it turned on, digital...
(More)
camera not turning on and off properly , it wont take pictures when i do get it turned on, digital image stabilization keeps coming up on the screen.
Kodak esp 3 papertray and hinge is light weight and has broken papertray twice. I would appreciate...
(More)
Kodak esp 3 papertray and hinge is light weight and has broken papertray twice. I would appreciate Kodak replacing it with a different model this second time. I have written two letters about the problem. The tray juts out far from the body of the printer and has a small plastic hinged area which in my case has broken twice with gentle use. When speaking to the Kodak agent, she accidently disconnected me, and did not yet call back or e-mail. She had been speaking to a manager as to replacing a different model. I have told them this will break again and again and I will be at a loss when the warranty is up. It will just be more work and lost money for Kodak to give me the same papertray, which I believe is designed in a way that can easily break. I will become an annoyed customer and not want to buy their products. Any fix for this papertray/ hinge area to avoid breakage? What do most companies do when an item breaks twice and is likely to do so again? Thanks