Question about Kenmore 24032\24036 Top Load Washer
Water fills up......and will drain, but nothing in between..but noise........
Motor coupling is broken, this is a very inexpensive part and the new one is improved.......purchase one from any appliance part store and ill help with installation. There are quite a few tricks to axcessing the motor but if you handy its a cinch .
Posted on Jan 12, 2008
Tips for a great answer:
Jan 18, 2013 | Washing Machines
Dec 05, 2012 | Washing Machines
Nov 05, 2012 | Washing Machines
make sure that nothing is blocking the drain pump assembly located inside the
bottom of the unit, after this test the lid switch assembly, you jump it to
test it. If the lid switch is also fine then the control board should be
replaced. Hope this helps...please post back for further assistance.
Sep 05, 2011 | Kenmore Washing Machines
Jun 11, 2009 | Kenmore Washing Machines
Jan 08, 2009 | Kenmore 24032\24036 Top Load Washer
Aug 04, 2008 | Kenmore 25862 Top Load Washer
Feb 23, 2008 | Kenmore 24032\24036 Top Load Washer
125 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: