Question about RCA TruFlat 27F520T 27" TV

1 Answer

I cannot get some channel from my trulflat RCA DVD

My tv was programmed for cable at one time and i cannot get the cable channels off so i can get some regular channels on my tv i do not see the button on the remote or tv to program cable off and get some regular channels and in the menu area do not see it either and a program to switch it out from spanish to english where is this located of how do i arrive at getting it. Can you assist me in this and also my tv on the dvd area is programmed for spanish how do i get that off to english, in the dvd area while going to it i see something that says AV1 what is that. Thank you for your further assistants. These are the numbers that i see at the back of the tv 20F510TD that is the model number and another number is F332KX4FO.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers
Re: I cannot get some channel from my trulflat RCA DVD - RCA TruFlat 27F520T 27" TV Standard (CRT) Televisions

Av 1 is audio-video input 1

Posted on Jan 06, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

How to get dvd on tv

There are generally 2 ways to connect a dvd player to a tv.1 If you have 3 rca connectors on the back of your tv (they are color coded yellow for video and white and red for audio left and right channels respectively) and the same connectors on the back or side of the dvd player.Use rca cables to connect the dvd player to the tv,connecting yellow to yellow white to white and red to red.Using the remote put your tv on video.Put the channel selector on the dvd/vcr player on video or L1 or E1 (depending on what brand dvd/vcr you have).2 connect a rf (coaxial cable from the rf output of the dvd/vcr and connect this directly to the rf (antenna) input to your tv.Put the tv on channel 3.Play the dvd/vcr to see if you have the video.If not put the tv on channel 4.Some dvd/vcr's put their signals out on channel 3 and others on channel 4.Good luck.

Sep 15, 2013 | Disney 13" TV

1 Answer

No channel 3, the tv goes from channel 2 to 4, can't use the cable box

Two options...

1. Connect the Cable Box via RCA cables (Yellow/Red/White) or Component cable if you have a HD cable box and select the appropriate input on the TV to view your programs. This will provide the best picture quality as well.

2. Make sure the cable box is on. Using the original TV remote type in the channel 03 and if this tunes to the channel then go to the TV menu and then go to Set up and then select add/erase and select add.

If typing 03 did not tune in channel 3 then using the TV remote select menu then go to set up and then make sure TV / Cable is set to cable then on the cable box press the channel button a couple of times and then select auto program on the tv.

Jan 03, 2010 | Toshiba 27AF44 27" TV

1 Answer

I have dynex flat screen hdtv,need to hook up jvc dual dvd-vcr recorder to it need direction pls have no knowledge of hooking up this diagram would also be great

  • find the video input 1 in the back of the tv (this video connector yellow + audio red **audio right channel and white left channel) is known as female RCA conector)
  • get a set of rca wires **known as male RCA*** (yellow red and white)
  • find the RCA female conectors Yellow red and white in the DVD call it video (and audio) output
Connect sets accordingly the TV video input yellow conector with video output yellow with the set of wires RCA yellow. Do the same with audio.

  1. second part of this talking is to find and cable splitter (usually three output and one input
  2. find TWO coax cables (this cable is usually a black wire with a connector each side this fits perfectly in the antena input of the tv)
Now connect your cable into the splitter (input) and your two cables in each output, then send one of them into the TV antena conector and another to the DVD coax input.

To watch your TV only select any regualr channel as you do it.
And to record and actually see Your DVD/tape and what you record also. You have to select in your remote control the video 1

ones you get custome to this configuration you can record a channel and at the ssame time watch any second channel selected in the tv.

I hope was clear.

Apr 21, 2009 | Dynex 20" Digital TV

1 Answer

No channel below 7 when hooked direct to cable connection. Reset and auto program channels , only get 7 and up. This makes it unable to use VCR tuned to channel 4 or 3 . As well as not getting the lower...

low band in the tuner is bad .the tuner needs replacing. simple way to fix it use vcr or dvd with tuner
in it use video inpiuts on tv and use the tuner in vcr or dvd. works great


Feb 25, 2009 | RCA F32650 32" TV

1 Answer

Can't watch dvd

You need the original remote controller to be able to switch input modes.Universal ones don't work. If you don't have the original remote and can't find it ever then the only way to reach your tv is through coaxial antenna port. So you can buy an rf modulator ( very cheap) and connect your red yellow and white cables (rca cables from a dvd, game console etc) to the modulator then connect the modulator to your antenna with a coax cable. This worked for me. It placed the connection to channel 4 and other channels are still working,

You can buy the RF Modulator from:

Oct 11, 2008 | Symphonic ST420FF 20" TV

2 Answers

RCA f20580wn 20" TV about 20 years old

Hopefully you have the problem solved.

If not, the RCA plugs, listed as input 1 and 2 are shown on channel 91 and 92.

I recommend connecting the DVD to either input. Turn on the DVD. Then run the auto programming function of the TV. It will find and program the channel for the DVD. Then use the channel up or down on the remote you are currently using and you should find a working DVD.

Hope this helps.


Apr 07, 2008 | Standard (CRT) Televisions

1 Answer

Program satelite or cable

you are not specific as to programming cable or satellite .if you have cable tv with a cable box there is no need to program tv channels.the tv should be left on channel 3.check the back of the cable box & tv it may also be connected thru rca/s-video or componant cables meaning the tv should be on a line in/source ,or video input. for a tv without a cable box
you can do the auto or manual programming. no need to be on channel 3. if you have satelllite tv you need the box to hook up to your cannot bypass this box unlike cable tv.also check the back of the box for the other possible connections
good luck

Jan 28, 2008 | JVC AV-27D202 27" TV

6 Answers

Can't get TV onto the AUX channel

You can purchase an RCA universal remote that will let you access the A-V inputs. These only cost about $10.00 or so. Stargazer

Sep 09, 2007 | RCA F25254GY 25" TV

3 Answers

Cannot get DVD to Play on TV

Try the old RCA/GE channels of 90/91 or 92 to get to the inputs. Or try entering channel 00. Let me know if that works.

Feb 21, 2007 | RCA F32649 32" TV

2 Answers

Television will not program channels 2-7

It seems you have already try everything We might suggest< I dont know if you have tried using the video and audio outputs in the dvd/vcr combi unit conecting them to the audio and video imputs of your tv and the selecting maybe one of the AUX channels to watch it,If you have a tuner problem in your tv this will be a way to bypass it and control the channels from you combi unit.We would like to know the outcome,please let us know.

Oct 09, 2006 | RCA F27669 TV

Not finding what you are looking for?
RCA TruFlat  27F520T 27" TV Logo

121 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

66528 Answers

John mullen

Level 2 Expert

229 Answers


Level 3 Expert

2963 Answers

Are you a RCA Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides