Any schematics available for a APC Back-UPS Pro 650PNP?
I installed a new battery (yes correct polarity) and smelled a little smoke. It was unplugged during the battery swap.
I took the cover off but didn't see anything obvious. It will turn on and then shuts right down.
hi, i don't have the schematic but, i think if you connected the batteries okay and had switched off the machine then it should work. when switching on there are two sounds that come, first its a beep, if you release the ON SWITCH the UPS will just do a self test then shutdown. to switch ON the UPS completely don't release the on button until you hear a second beep, if you release the ON switch when this beep is on, then the UPS will be ON completely.
i have a Brayton control panel for my central heating, but cannot find the manual, could someone...
(More)
i have a Brayton control panel for my central heating, but cannot find the manual, could someone please advise how to get the instructions or tell me how i can programme it?? many thanks LP722 Lifestyle- says on the panel.
We have 6 Sola / Powerware 1000VA UPS's and Eaton dont repair at component level they just want to...
(More)
We have 6 Sola / Powerware 1000VA UPS's and Eaton dont repair at component level they just want to slug you for a new main board $900 installed..not fair or good customer service.They wont supply a circuit so if you could help we could also send some work your way if youre in Melbourne anyway. Worst come to the worst I could give away a few good inverters for Xmass.. Thankyou Phil
The ATIVA USB to Serial cord came with a disc that neither of my computers recognizes. My computer...
(More)
The ATIVA USB to Serial cord came with a disc that neither of my computers recognizes. My computer does not recognize the USB connection and cannot locate a driver online. Help....