Need to remove/clean/replace FTF2140ES0 Bellows Kit.
Comments:
Nov 11, 2009
- Still looking for help. I managed to get the door boot off (Bellows) without having to pull the machine apart. Now trying to place the boot back on but don't see how this is possible with disassembling the unit to place the clamps that secure the boot to the washer.
My frigidaire ftf2140es3 does not spin dry. It washes OK. I did try to clean the black boot at the...
(More)
My frigidaire ftf2140es3 does not spin dry. It washes OK. I did try to clean the black boot at the bottom. I also tried to use powder detergent and hot wash. I used 100% cold wash before. Any idears?
After the initial cycle, my Frigidaire FTF2140ES3 just beeps three times, pauses, and then beeps...
(More)
After the initial cycle, my Frigidaire FTF2140ES3 just beeps three times, pauses, and then beeps some more. Door will open, but it hasn't cycled all the way through. Any ideas?
onced cleaned and put back together, Now it will start to fill but will not wash or spin. Can hear...
(More)
onced cleaned and put back together, Now it will start to fill but will not wash or spin. Can hear different clicking but is not working. lights are on. is there a reset switch? Got wet in the back when hose was drained to clean filter.
I have an FTF2140E frigidaire front loading washer. Washes fine, but every few days, the LED panel...
(More)
I have an FTF2140E frigidaire front loading washer. Washes fine, but every few days, the LED panel starts beeping madly, lights all over the panel flash, we get something that looks like a "C" or "J" on the LED display.
There doesn't seem to be any obvious solution -- sometimes, cutting power for a bit helps, sometimes wildly spinning the knob, opening and closing the door, sometimes death threats...
Do we have a dead control panel?
Thanks for your help!