brother hl5140 laser printer, drum light kept on blinking, i changed the drum (only drum) and now drum light still keeps on blinking. PLEASE HELP, what I am doing wrong?? thanks
Comments:
Nov 09, 2009
- brother hl5140 laser printer, drum light kept on blinking, i changed the drum (only drum) and now drum light still keeps on blinking. PLEASE HELP, what I am doing wrong?? thanks
I get a visible gap on printouts? I changed the drum and toner cartridge but the problem persists?...
(More)
I get a visible gap on printouts? I changed the drum and toner cartridge but the problem persists? any ideas??
had a paper jam indication. After removing the paper and closing the cover, the paper light...
(More)
had a paper jam indication. After removing the paper and closing the cover, the paper light continues to flash along with a red status light. Down powered, removed power cable, removed printer cable, added paper, checked internal to see if anything was broken. Cannot get printer back to normal state. alarmit.ca@sbcglobal.net
While printing on a form, the first copy often prints properly; subsequent printing is consistently...
(More)
While printing on a form, the first copy often prints properly; subsequent printing is consistently about 1/4 inch lower than the spaces on the form.
Bought a new drum and installed it. I printed a document. The first page only half appeared. The...
(More)
Bought a new drum and installed it. I printed a document. The first page only half appeared. The 'paper' light flashes and the status button glows red. I removed the document. But the paper and status light still remain the same. I've opened door, pressed Go till all lights show. I've done it and after closing the door, pressed the Go button 3 times. I've changed the paper and put better quality paper in. I've checked the printer and can find no sign of trapped paper. I've turned the printer's power off and on. But there is no change.