I had wi-fi in my Gateway laptop working fine. Now it sees the router but can't log on. I think it's due to a new Norton Utils and also when I talked to Belkin they had me adjust my settings and now I can't access any open networks. Any ideas? Thanks!
If you are experiencing this issue only after installing the "Norton" then add your Wireless Network as the Secure or Trusted Network in the Norton and check.
This should resolve the issue.
If you are getting any any error message then please post the exact error message so that I can help you further.
D-Link 2100 AP is working in Wireless Client mode. It is connected to home network with cat5 cable....
(More)
D-Link 2100 AP is working in Wireless Client mode. It is connected to home network with cat5 cable. The remote ADSL modem is 192.168.1.1 and DHCP on. The first computer in the network obtains IP and internet access. The second computer wouldnt obtain IP, nor it wont ping 192.168.1.1 with manual IP config. What is the point here ? Does it need a NAT configuration ? Or should i use a different IP group in internal side such as 192.168.0.X ?
Is the PTP 400 Full 5.4 GHz effected by fog and other weather conditions? Have link that goes down...
(More)
Is the PTP 400 Full 5.4 GHz effected by fog and other weather conditions? Have link that goes down in performance in foggy weather.