Turn unit on and wait for password prompt Depress the and hold the enter button until camera
switches into 5-digit password mode _ _ _ _ _. Trail sentry systems will not indicate 5-digit mode on the screen, but will indicate _ _ _ _ instead of HHHH .
Press enter to confirm 5 digit mode
Enter 5-digit code 66214 and press enter button( trail sentry cameras will accept a 5th Digit after the 4th digit is entered in the _ _ _ _ screen.
Camera will now go into operating mode, and user can now program a new password from the setup mode
If you have a reset button somewhere on the camera, you can reset it to the default settings, which would also reset the password to the password the factory sent it to you with, which would be in the manual. If you don't have the manual, you can download it here: http://www.bushnell.com/products/trail-cameras/instruction-manuals/
Was this helpful?
Yes
No
1 person thought this was helpful
Popular Solutions for Bushnell Trail Sentry 11-9200
I held the enter button on for a few seconds and the word fast appeared on the screen what does this...
(More)
I held the enter button on for a few seconds and the word fast appeared on the screen what does this mean and how do i turn this off